Ice IB1500 Programming manual

Operator & Parts Manual
Floor Burnisher
www.icecompanies.com
5015016
REV.01(08-2016)
iB1500
INTERNATIONAL CLEANING EQUIPMENT

HOW TO ORDER PARTS
Only use ICE Company supplied or equivalent parts. Parts and supplies may be ordered
online,by phone, by fax or by mail.
1. Identify the machine model.
2. Identify the machine serial number from the data label.
3. Ensure the proper serial number is used from the parts list.
4. Identify the part number and quantity.
Do not order by page or reference numbers.
5. Provide your name, company name, customer ID number,billing and shipping address,
phone number and purchase order number.
Please ll out at time of installation for future reference.
Model No.
Serial No.
Machine Options
Sales Rep.
Sales Rep. phone no.
Customer ID Number
Installation Date
READ OPERATOR MANUAL CAREFULLY
International Cleaning Equipment
XiangShi Road LiaoBu DongGuan GuangDong China
Tel:[phone]
Fax:[phone]
Specifications and parts are subject to change without notice.
PROTECT THE ENVIRONMENT
Please dispose of packaging materials,old machine components
such as batteries,
hazardous uids, including antifreeze and oil, in an environmentally
safe way according to local waste disposal regulations.
Always remember to recycle.
ICE iB1500
2
IMPORTANT:To ensure full warranty protection,Please ll out
& return your warranty card.

SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
MACHINE COMPONENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
MACHINE OPERATING INSTRUCTIONS . . . . . . . . . . . . . . . . . . 6
MACHINE MAINTENANCE & STORAGE . . . . . . . . . . . . . . . . . 7
PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13
WEAR & TEAR PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . .14
SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
WIRING DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3
ICE iB1500
TABLE OF CONTENTS

SAFETY PRECAUTIONS
ICE iB1500
4
OPERATOR
Carefully read and understand this manual before operating this machine.
This machine must be grounded!
This oor/nishing machine shall be grounded while in use to protect the operator from electric
shock.Grounding provides a path of least resistance for electric current. This machine is
equipped with a cord having an equipment-grounding conductor and grounding plug. The plug
must be plugged into an appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinances. Do not remove the ground pin under any circumstances.
This machine is for use on a nominal 120-volt circuit
and has a grounding plug that resembles the plug
illustrated in Figure. Make sure that the machine is
connected to an outlet having the same conguration as
the plug. No adapter should be used with this machine.
This machine is intended for commercial use. It is constructed for use in an indoor environment
and is nor intended for any other use. Use only recommended accessories.
1. Do not operate machine:
– Unless trained and authorized. – Unless you have read and
– In ammable or explosive areas. understand the operators manual.
– With a damaged cord or plug. – With the use of extension cords.
– If not in proper operating condition. – In outdoor areas and standing water.
2. Before operating machine:
– Make sure all safety devices are in place and operating properly.
3. When using machine:
– Only use approved burnishing pads. – Do not run machine over cord.
– Do not pull machine by cord or plug. – Do not pull cord around sharp
– Do not stretch cord. edges or corner.
– Do not unplug by pulling on the cord. – Do not handle plug with wet hands.
– Turn power switch to “off “ prior to – Keep cord away from heated surfaces.
unplugging machine. – Do not pick up burning or smoking
– Report machine damage or faulty debris such as cigarettes, matches
operation immediately. or hot ashes.
To avoid electrical shock,please replace the power cord immediately if any damage is
being detected. The replacement must be performed only by an authorized person or
by our customer service center.
4. Before leaving or servicing machine:
– Turn off machine. – Unplug cord from outlet.
5. When servicing machine:
– Unplug cord from outlet. – Use manufacturer supplied or
approved replacement parts.

ICE iB1500 5
OPERATOR
MACHINE COMPONENTS
Machine Description Machine Structure
1
2
1１1０ ９
• New structure design
• 20" Housing
• 20" Pad brush
• Engnieering plastics
• Drive belt
• Handle foldable structure
• Safety lock-out switch
• Security protection in an upright
• Use twist spring adjustment pad pressure
• 50' Cord
1. Housing
3. Foldable handle
5. Trigger
7. Handle
9. Twist spring
11. Pad holder
2. Wheel
4. Safety lock-out switch
6. Leveling rod
8. Motor
10. Lock washer
３
４
５
６
７
８

OPERATION OF HIGH SPEED FLOOR MACHINE
ICE iB1500
６
OPERATOR
General Use:
1) Remove any obstructions or other obstacles in the area which is to be cleaned.
2) Place handle in upright position and tilt machine back until handle rests on the oor.
Be sure the machine is not plugged into an outlet.
3) Remove the pad center gripping device by unscrewing the thumbscrews.
4) Place a "ICE approved" burnishing pad on the pad driver and re-attach the
center gripping device. (check with your ICE distributor for approved pads)
5) Place machine back into its upright position.
THIS IS A SPECIALIZED MACHINE WHICH REQUIRES THE OPERATOR TO UTILIZE
A ICE APPROVED PAD, AND MUST BE ADJUSTED PROPERLY TO ENSURE THE
HIGHEST POSSIBLE PERFORMANCE AND PRODUCTIVITY.
Read operators manual thoroughly prior to operating or servicing this machine.
7) Adjust the handle (switch housing) height to a comfortable operating position.
8)To start the machine, push on the Blue safety button of the top of upper switch housing and
squeeze either of the switch levers.
9) When the machine is in operation, both hands should be placed on the handle (switch
housing).
10) When the machine is in operating, both hands should be gripping the hand.
11)To stop the machine at any time, simply release the switch lever, and the machine will stop
automatically.
Do not use an extension cord in conjunction with the standard power cord.
6) Plug power cord into grounded outlet.

OPERATOR
STORAGE
1) Unplug machine from power source and wrap cord on handle.
2) Store in upright position in a dry area.
MAINTENANCE
To keep the machine performing well for many years, please follow the following maintenance
procedures.
Always confirm that the machine is unplugged prior to performing any
maintenance or repairs.
1. Unplug machine as soon as you are done using it.
2. Clean the outside of the machine with a mild cleaner.
3.Check power cord for any damage. If any damage is detected, replace the cord immediately.
4. Lubricate wheels with a water resistant lubricant once a month.
5. Check machine for loose or missing nuts and bolts, and replace as necessary.
6. If the machine is used in a dusty environment, you may remove the motor cover and blow
the motor clean with compressed air. This will allow for good ventilation and help the motor run
cooler.
ICE iB1500 ７

PARTLIST
iB1500 HANDLE ASSEMBLY
ICE iB1500
８

DIA
NO PART NUMBER NO REQ'D
1 5020112INSERT 1
2 4010208SPRING LEVELING 1
3 5020120ROD LEVELING 1
4 5020109TUBING BOTTOM BRACKET 1
5 1647845PIN 1
6 5011019TUBING BOTTON BASE 1
7 4010405HOOK CABLE 1
8 1511540SCREWM5 X40 HEXSOCKET 2
9 1434500TOOTH WASHER 5 4
10 1211512SCREWM5X12 4
11 1434400TOOTH WASHER 4 2
12 1221412SCREWM4X12 1
13 5011017LEVELING ROD 1
14 4010314PIN 3
15 5011004COVER 1
16 4010320CORD POWER SUPPLY 1
17 4020310STRAIN RELIEF CORD 1
18 1421616WASHER PLAIN Ø6 4
19 1512635SCREWM6 X35 2
20 5015017SERIAL NUMBER 1
21 1512625SCREWM6 X25 2
22 4010312REAR COVER 1
23 5013009CIRCUITBREAKER 20A 1
24 4010333SPRING SAFETY 1
25 4010317BALL BASE 1
26 1211408SCREWM4X8 2
27 4010330LEFTTRIGGER SWITCH 1
28 4010331RIGHTTRIGGER SWITCH 1
29 1211325SCREWM3X25 2
30 4010323SPRING SWITCH 1
31 1434300TOOTH WASHER 2
32 4010308SWITCH 1
33 4010307SAFETYBOTTOM 1
34 4010301FRONTCOVER 1
35 4010316ICE LOGO 1
36 4010311CLAMP CORE 1
HANDLE ASSEMBLY PARTS LIST
DESCRIPTION
ICE iB1500 ９

DIA
NO PART NUMBER NO REQ'D
37 1221406SCREWM4X6 2
38 1123608NUTLOCK M6 1
39 1421612WASHER 6 6
40 1113507NUTLOCKM5 2
41 4010403CLAMP HOOK 1
42 5020119TUBING TOP BRACKET 1
43 4010215CORD HANDLE 1
44 4010213GROMMET 1
45 5011018TUBING TOP BASE 1
46 1644045PIN 1
47 1221620SCREWM6X20 6
48 1422616WASHER LOCK Φ6 6
49 6150712WIRE CLIP 1
50 1535610SCREWM6x10 1
DESCRIPTION
HANDLE ASSEMBLY PARTS LIST
ICE iB1500
１０

ICE iB1500 １１
PARTLIST
iB1500 BASEASSEMBLY

DIA
NO PART NUMBER NO REQ'D
1
4010316 1
2
4010103 1
3
1221512 3
4
4010102 1
5012310 1
5012310-1 1
6210423 1
6
5020108 1
7
5020117 1
8
5020200 1
9
5020113 1
10
1421816 2
11
1422821 4
12
1021816 2
13
5020106 4
14
1421409 4
15
1221410 4
16
5020107 2
17
5012407 1
18
5012408 2
19
4210115 2
20
4010111 4
21
1421618 4
22
1534608 2
23
4210116 2
24
1421625 4
25
1436012 4
26
5012426 1
27
5012305 1
28
5012308 1
29
5012605 1
30
5012205 1
31
5012306 1
32
5012303 2
33
1021825 1
34
5012111 1
12
5
KEY MOTOR
WASHER PLAIN Φ8xΦ30x5
SCREW M8x25 HEX
HOUSING
FRONT AXLE
SPACER
DRIVING PULLEY
VEE BELT
KEY DRIVEN SHAFT
WASHER PLAIN Φ6.4×Φ18×1.6
SCREW M6x8
WHEEL 5"
WASHER PLAIN Φ12.5× Φ25×1.5
RETAINING RING EXTERNAL Φ12
SCREW ROD
REAR AXLE
SPACER WHEEL AXLE
WHEEL 6"
HEX SCREW M6x12.7
WASHERLOCK Φ8
SCREW M8x16 HEX
SPACER
WASHER PLAIN Φ4× Φ9×0.8
SCREW M4x10 PH
ICE iB1500
BASE ASSEMBLY PARTS LIST
DESCRIPTION
ICE LOGO
COVER TOP
SCREW M5X12 PH
COVER MOTOR
MOTOR 1.0KW 120v
CARBON BRUSH ASSEMBLY
RECTIFIER 50A/1000V
TWIST SPRING
TWIST SPRING COVER
HOUSING
POSITION PLATE
WASHER PLAIN Φ8× Φ16×1

DIA
NO PART NUMBER NO REQ'D
BASE ASSEMBLY PARTS LIST
DESCRIPTION
35
9060020 1
36
9000001 1
37
1031830 1
38
1521620 5
39
1422616 5
40
1421612 7
41
5012201 1
42
1612607 2
43
5012203 1
44
5012204 1
45
1437042 2
46
1111008 5
47
1021065 1
48
1011016 4
49
1123608 1
50
1111807 4
51
5012423 2
52
1031032 4
53
5012202 1
54
1421020 16
55
1432026 8
56
1124018 4
13
SCREW ROD M8
SCREW M10x32 HEX
MOUNTING PLATE DRIVEN SHAFT
WASHER PLAIN Φ10
WASHER LOCK Φ6
WASHER PLAIN Φ6×Φ12×1.6
NUT M10
SCREW M10x65 HEX
SCREW M10x16 HEX
NUT LOCK M6
NUT M8
DRIVEN PULLEY
BEARING 6004LU TPI
DRIVEN SHAFT
SPACER BEARING
RETAINING RING INTERNAL Φ42
BIG MOUTH
SCREW M8x30 HEX
SCREW M6 x 20 HEX SOCKET
PAD HOLDER 20"
WASHER LOCK Φ10
CAP NUT M10
ICE iB1500

OPERATOR
DIA
NO PART NUMBER NO REQ'D
1 4210115 2
2 5012605 1
3 4210116 2
WHEEL 6"
VEE BELT
WHEEL 5"
Cable Length 15 m
Sound Level 62dB(A)
Power 1.5HP
Voltage 120 V
Dimension LXWXH 93X62X128 cm
Weight
Brush Speed 1500 rmp
Working Width 20"(51cm
38.5Kg
WEAR & TEAR PARTS
DESCRIPTION
SPECIFICATIONS
Model iB1500
ICE iB1500
１４

OPERATOR
WiringDiagram
iB1500
Green White Black Switch
60Hz Phase Power Single 120V
Motor
Supply
Handle
Cord Motor
Cord
SwitchHousing
Power Cord Supply
STO 14/3C
Circuit Breaker
ICE iB1500 １５