Ice RS26L+ User manual

RS26L+
RS32L+
Ride-On Auto
Scrubber
Operator Manual

3
ICE RS26L+ / RS32L+
OPERATOR MANUAL
ICE Company Limited
XiangShi Road LiaoBu DongGuan GuangDong China
Tel: 0769 - 81869000
Fax:0769 – 81863000
Specifications and parts are subject to change without notice.
PROTECT THE ENVIRONMENT
Please dispose of packaging materials, old machine components such as bat-
teries, hazardous fluids, including antifreeze and oil, in an environmentally safe
way according to local waste disposal regulations.
Always remember to recycle.

4
ICE RS26L+ / RS32L+
OPERATOR MANUAL
READ OPERATOR MANUAL CAREFULLY!
1. Identify the machine model.
2. Identify the machine serial number from the data label.
3. Ensure the proper part number is used from the parts list.
4. Identify the part number and quantity.
Do not order by page or reference numbers.
5. Provide your name, company name, customer ID number, billing and shipping address, phone
number and purchase order number.
IMPORTANT: To ensure full warranty protection, please fill out & return your warranty card.
Please fill out at the time of installation for future reference.
Model No. ____________________________________________________
Serial No. ____________________________________________________
Machine Options _______________________________________________
Sales Rep. ___________________________________________________
Sales Rep. Phone No. ___________________________________________
Customer ID Number ___________________________________________
Installation Date _______________________________________________
HOW TO ORDER PARTS
Only use ICE Company supplied or equivalent parts. Parts and supplies may be ordered online, by phone, by
fax or by mail.

5
ICE RS26L+ / RS32L+
OPERATOR MANUAL
TABLE OF CONTENTS
SAFETY PRECAUTIONS …......................................................................................
MACHINE COMPONENTS........................................................................................
Machine Components
i-Synergy
TM
Introduction
MACHINE SETUP & INSTALLATION........................................................................
Uncrating Machine
Installing batteries
Battery Charging
Installing Brushes or Pads
Mounting the Squeegee Assembly
Filling the Solution Tank
Auto-fill Hose Port (Option)
Filling The Detergent Bottle
MACHINE OPERATION............................................................................................
Pre-Operation Checks
Operating the Machine
WHILE OPERATING MACHINE.................................................................................
Brake Device
Emergency Stop Button
TANK DRAINING.....................................................................................................
Draining The Recovery Tank
Draining The Solution Tank
PREVENTATIVE MAINTENANCE..............................................................................
Daily Maintenance
Monthly Maintenance
Machine Storage
FAULT CODE & SOLUTION......................................................................................
BASIC TROUBLESHOOTING....................................................................................
TECHNICAL SPECIFICATION...................................................................................
WEAR AND TEAR PARTS LIST.................................................................................
CE APPROVAL........................................................................................................
6– 7
8– 14
8-11
12
13– 17
13
14
15
16
17
18
19
19
20-22
20
20-22
23-25
25
25
26
26
26
27-28
27
27
28
29-32
33-34
35
36
38-41

6
ICE RS26L+ / RS32L+
OPERATOR MANUAL
SAFETY PRECAUTIONS
Do not operate the machine:
- Unless trained and authorized.
- Unless you have read and understand the
operators manual.
- In flammable or exploxive areas.
- With brake disabled.
- If not in proper operating condition.
Before starting the machine:
- Make sure all safety devices are in place
and operate properly.
- Check brakes and steering for proper
operation.
When using the machine:
- Go slow on inclines and slippery surfaces.
- Follow all safety guidelines.
- Be very careful when using the machine
in reverse.
- Reduce speed when turning.
- Report and fix any damage to machine pri-
or to operating it.
- Never allow children to play on or around.
Before leaving or servicing the machine:
- Stop on a level surface.
- Turn off the machine.
When servicing the machine:
- Read operators manual thoroughly prior to
operating or servicing this machine.
- Use manufacturer supplied or approved
replacement parts.
- Secure machine with wheel blocks prior to
jacking the machine up.
- Use approved jack or hoist to safely ele-
vate the machine.
- Disconnect batteries prior to working on
machine.
- Avoid moving parts. Do not wear loose
fitting clothing while servicing machine.
1.
2.
3.
4.
5.
This machine is intended for commercial use.
It is designed exclusively to scrub hard floors in an indoor environment and is not constructed for any other use.
Only use the recommended accessories.
All operators shall read, understand and exercise the following safety precautions:

7
ICE RS26L+ / RS32L+
OPERATOR MANUAL
WARNING:
Fire or Explosion Hazard.
Keep sparks and open flames away!
Keep battery compartment open when charging.
WARNING:
Flammable materials can cause an explosion or fire.
Do not use flammable materials in tanks.
WARNING:
Flammable materials or reactive metals can cause an explosion or fire.
Do not pick up.

8
ICE RS26L+ / RS32L+
OPERATOR MANUAL

9
ICE RS26L+ / RS32L+
OPERATOR MANUAL
MACHINE COMPONENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
Solution tank
Auto-fill hose port (Option)
Hose fill port & Cap
Squeegee assembly
Wheels, 10 inch
Scrub head assembly
Side squeegee assembly
Cup holder
Brake pedal
Propel pedal
Front drive wheel
Operator seat
Steering wheel
Control panel, Touch screen
i-SynergyTM, ID card scanning area
LED light, work
Emergency Stop button
Adjusting handle, seat
Off-board battery charger port (Option)
Watching window, On board battery charger
Warning light
Recovery tank cover
Recovery tank
USB Charging port
Cabin door, Detergent bottle compartment
Mesh, Battery charger power cord.

10
ICE RS26L+ / RS32L+
OPERATOR MANUAL

11
ICE RS26L+ / RS32L+
OPERATOR MANUAL
MACHINE COMPONENTS
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
Horn button
Battery meter
Date & Time
Solution flow adjusting button
1-Step starting button
Work mode select button
Detergent adjusting button
Timer
Brush pressure adjusting button
Direction button
Setting button
Vacuum motor button
Fault icon
Warning light button
Drain hose, recovery tank
Vacuum hose
Drain hose, solution tank
Adjusting knob, Squeegee

12
ICE RS26L+ / RS32L+
OPERATOR MANUAL
i-Synergy
TM
collects operational data from cleaning machines and transmits the information to ICE’s server.
The ICE server generates daily reports and sends them to designated end users by email. From these reports,
end users will have information about machines’ usage and even specific timings.
Besides, i-Synergy
TM
also collects data from the lithium-ion battery, vacuum motor, brush deck motor, drive
wheel motor, and other electrical components at least once every minute when the machine is in use and even
during battery charging.
i-Synergy
TM
will send notifications instantly to the ICE server in case of any malfunction.
ICE maintenance personnel will receive an SMS within minutes from the ICE server for immediate servicing.
i-SynergyTM Introduction

13
ICE RS26L+ / RS32L+
OPERATOR MANUAL
MACHINE SET UP & INSTALLATION
Uncrating Machine
Be sure and check packing carton for any damage. Immediately report any damage to the carrier. Check the
contents of package to ensure that the following items are included:
Machine,
Lithium-ion Batteries,
Squeegee assembly
•
•
•
2-Pad drivers
2-Brushes
•
•
1.
2.
3.
4.
Uncrate the wooden box, place the top
board on the edge of the pallet, placing
it in the front of themachine, as shown
to the right.
Install batteries.
(see INSTALLING BATTERIES)
Place the ID card on the scanning area
(Machine components, #15) to turn on
the machine, make sure the squeegee
assembly (Machine components, #4)
and the scrub head assembly (Ma-
chine components, #6) is off the floor.
Sit in the operator seat (Machine com-
ponents, #12), hold the Steering wheel
(Machinecomponents, #13), press the
propel pedal (Machine components,
#10) and driving slowly the machine
down from the slope.

14
ICE RS26L+ / RS32L+
OPERATOR MANUAL
The machine uses the Lithium-ion batteries, the batteries are already in the machine upon
delivery. However you will need to connect the Lithium ion batteries to the machine.
Installing Batteries (for i-Synergy machines only)
Turn off the machine.1.
WARNING:
Fire or Explosion Hazard.
Keep sparks and open flames away!
Keep battery compartment open when charging.
Open and prop up the operator seat, plug
the batteries connector to the machine
adaptor, connect machine i-Synergy
TM
COM port to the batteries. (See Fig. 1
and 2)
2.
Figure 1 Figure 2

15
ICE RS26L+ / RS32L+
OPERATOR MANUAL
WARNING:
Fire or explosion hazard. Keep sparks and open flame away.
Keep battery compartment propped open when charging.
Use only ICE supplied or approved batteries charger, use of unapproved charger maight
cause damage to the batteries and machine.
NOTE:
The machine will not operate while charging.
Applicable to charging Lithium-ion
batteries
Automatic shut off circuit
Output current of 30Amps
Output voltage of 24Volt
•
•
•
•
1.
2.
3.
4.
5.
Transport the machine to a well ven-
tilated area.
Turn the machine off.
Prop up the Operator seat by the sup-
port stand for ventilation.
Connect the charger’s AC power supply
cord (See Fig. 3 and 4) to a properly
grounded receptacle.
The charger will automatically begin to
charge, you can see the charging status
on the window (Machine components,
#20), once the charging cycle begins,
the indicator lights will progress from
red, yellow to green. when the green
indicator light comes on, the charging
cycle is done. Unplug the charger cord.
(See Fig. 5)
Batteries charger specifications:
Battery Charging
Figure 3
Figure 4

16
ICE RS26L+ / RS32L+
OPERATOR MANUAL
Installing brushes or pads
Turn off the 1-Step starting button (Ma-
chine components, #31) and raise the
scrub head assembly off the floor, then
stop the machine on a level surface, en-
sure the machine is turned off.
If using the pad driver, first attach the
appropriate pad to the pad driver surface.
1.
2.
Align the pad driver or brush under the
motor hub and push it upward to engage.
(See Fig. 6)
To remove the pad driver or brush, raise
the scrub head and remove the side
squeegee assembly (Machine compo-
nents, #7), push the edge of brush down-
ward.
3.
4.
Figure 5
Figure 6

17
ICE RS26L+ / RS32L+
OPERATOR MANUAL
Mounting the Squeegee Assembly
Turn off the 1-Step switch and raise the
squeegee assembly off the floor.
Mount the squeegee assembly to the
squeegee pivot bracket. make sure the
knobs are completely seated into the slots
before securing knobs.
1.
2.
Connect the vacuum hose (Machine com-
ponents, #42) to the squeegee assembly.
Loop the hose by using the hose clip pro-
vided.
Check the squeegee blades for proper
adjustment by adjusting the squeegee ad-
justing knob (Machine components, #44).
(See Fig. 7 and 8)
3.
4.
Figure 7 Figure 8

18
ICE RS26L+ / RS32L+
OPERATOR MANUAL
Filling the Solution Tank
The machine is equipped with a hose fill-port (Machine components, item #3) at the rear of the machine, and
a bucket fill-port (see Fig. 10) located under the recovery tank. Before accessing the bucket fill-port, make sure
that the recovery tank is empty.
WARNING:
Do not put any flammable materials into the solution tank.
This can cause an explosion or a fire.
Only use the recommended cleaning chemicals.
Contact your janitorial supply distributor for recommendations on proper
chemicals.
NOTE:
Before accessing the bucket fill-port make sure that the recovery tank is
empty. When filling the solution tank with a bucket, make sure that the
bucket is clean. Do not use the same bucket for filling and draining the
machine.
Figure 10

19
ICE RS26L+ / RS32L+
OPERATOR MANUAL
WARNING:
Do not put any flammable materials into the solution tank.
This can cause an explosion or a fire.
NOTE:
Only use the recommended cleaning chemicals.
Contact your janitorial supply distributor for recommendations on proper
chemicals.
Auto-fill Hose Port (Option)
Filling The Detergent Bottle
Connect the quick connector of the
filling hose to the Auto-fill port and
connect the another end to the water
supply connector.
Turn the water supply on, the water
flow will automatically shut off when
solution tank is full, and then turn the
water supply off.
The machine has an optional Auto-fill hose port (Machine components, #2), you can fill the solution
tank by using filling hose equipped with quick connectors.
The machine is equipped with a 4liter detergent bottle under the Recovery tank.
You can fill the detergent bottle by openning the deterent bottle cabin door (Machine components,
#25), and removing the detergent bottle cap.
The ratio of water and detergent is 0~5%, you can adjust this ratio by pressing the detergent adjusting
button (Machine components, #33).
1.
2.
Disconnect the quick connector from
the water supply end first, and then
disconnect the filling hose from ma-
chine and store in proper location.
3.

20
ICE RS26L+ / RS32L+
OPERATOR MANUAL
MACHINE OPERATION
Pre-Operation Checks
Check the tank cover seals for damage.
Drain the recovery tank, check the
vacuum fan inlet filter, clean them if
necessary.
Check the vacuum hose for debris or
blockage.
1.
2.
3.
Operating the Machine
Sit on the Operator seat, adjusting the
seat to a comfortable place by pushing
the seat adjustment handle (Machine
components, #18). (See Fig. 11)
Turn on the machine.
Check the Touch screen (machine com-
ponents, #14), if the machine has a fault
the fault icon (Machine components,
#39) will blink, please Do Not operate
the machine unless the fault has been
eliminated (please see FAULT CODES
AND SOLUTION on page 30 ).
Select the proper working mode by
pressing the Work mode select button
(Machine components, #32). The ma-
chine has 3 Modes: ECO, HEAVY DUTY
and USER CUSTOM.
1.
2.
3.
Check the squeegees for damage,
wear and for deflection adjustment.
Check whether Pad/Brush is installed
properly.
Check the brakes and steering for
proper operation.
4.
5.
6.
Figure 11
NOTE:
The machine will not travel unless the operator is sitting in the operator seat.