Ice RS28-OB Programming manual

Operator & Parts Manual
Rider Auto Scrubber
www.icecompanies.com
RS26
RS28-OB
RS32
INTELLIGENT CLEANING EQUIPMENT
8300004
REV.05 (03-2018)

2 ICE RS26 / RS28-OB / RS32
OPERATOR MANUAL
HOW TO ORDER PARTS
Only use ICE Company supplied or equivalent parts. Parts and supplies may be ordered
online,by phone, by fax or by mail.
1. Identify the machine model.
2. Identify the machine serial number from the data label.
3. Ensure the proper serial number is used from the parts list.
4. Identify the part number and quantity.
Do not order by page or reference numbers.
5. Provide your name, company name, customer ID number,billing and shipping address,
phone number and purchase order number.
3OHDVH¿OORXWDWWLPHRILQVWDOODWLRQIRUIXWXUHUHIHUHQFH
Model No.
Serial No.
Machine Options
Sales Rep.
Sales Rep. Phone No.
Customer ID Number
Installation Date
READ OPERATOR MANUAL CAREFULLY!
ICE Company Limited
XiangShi Road LiaoBu DongGuan GuangDong China
Tel: 0769 - 81869000
Fax:0769 - 81863000
Specifications and parts are subject to change without notice.
IMPORTANT:7RHQVXUHIXOOZDUUDQW\SURWHFWLRQSOHDVH¿OORXWUHWXUQ
your warranty card.
PROTECT THE ENVIRONMENT
Please dispose of packaging materials,old machine components
VXFKDVEDWWHULHVKD]DUGRXVÀXLGVLQFOXGLQJDQWLIUHH]HDQGRLOLQDQ
environmentally safe way according to local waste disposal regulations.
Always remember to recycle.

3 ICE RS26 / RS28-OB / RS32
OPERATOR MANUAL
TABLE OF CONTENTS
SAFETY PRECAUTIONS......................................................................................................4
MACHINE COMPONENTS................................................................................................5-6
MACHINE SETUP & INSTALLATION....................................................................................7
MACHINE OPERATION........................................................................................................8
WHILE OPERATING MACHINE............................................................................................9
TANK DRAINING.................................................................................................................10
BATTERY CHARGING........................................................................................................10
PREVENTATIVE MAINTENANCE.......................................................................................11
FAULT CODE AND ELIMINATE..........................................................................................12
TECHNICAL SPECIFICATION............................................................................................13
PARTS LIST..................................................................................................................14-45
WEAR AND TEAR PARTS...............................................................................................46
WIRING DIAGRAM.............................................................................................................47

4 ICE RS26 / RS28-OB / RS32
OPERATOR MANUAL
SAFETY PRECAUTIONS
This machine is intended for commercial use. It
LVGHVLJQHGH[FOXVLYHO\WRVFUXEKDUGÀRRUVLQDQ
indoor environment and is not constructed for any
other use. Only use recommended accessories.
All operators shall read, understand and
exercise the following safety precautions:
1. Do not operate machine:
-Unless trained and authorized.
-Unless you have read and understand the
operators manual.
-,QÀDPPDEOHRUH[SORVLYHDUHDV
-With brake disabled.
-If not in proper operating condition.
2. Before starting machine:
-Make sure all safety devices are in place
and operate properly.
-Check brakes and steering for proper
operation.
3. When using machine:
-Go slow on inclines and slippery surfaces.
-Follow all safety guidelines.
-Be very careful when using the machine in
reverse.
-Reduce speed when turning.
-5HSRUWDQG¿[DQ\GDPDJHWRPDFKLQHSULRU
to operating it.
-Never allow children to play on or
around.
4. Before leaving or servicing machine:
-Stop on level surface.
-Turn off machine.
5. When servicing machine:
-Read operators manual thoroughly prior to
operating or servicing this machine.
-Use manufacturer supplied or approved
replacement parts.
-Secure machine with wheel blocks prior to
jacking the machine up.
-Use approved jack or hoist to safely elevate
the machine.
-Disconnect batteries prior to working on
machine.
-Wear gloves when handling batteries or
battery cables.
-Avoid any contact with battery acid
-$YRLGPRYLQJSDUWV'RQRWZHDUORRVH¿WWLQJ
clothing while servicing machine.
WARNING: Batteries emit hydrogen
JDV([SORVLRQRU¿UHFDQUHVXOWIURP
hydrogen gas. Keep sparks and open
ÀDPHVDZD\.HHSEDWWHU\FRPSDUWPHQW
open when charging.
:$51,1*)ODPPDEOHPDWHULDOVFDQ
FDXVHDQH[SORVLRQRU¿UH'RQRWXVH
ÀDPPDEOHPDWHULDOVLQWDQNV
:$51,1*)ODPPDEOHPDWHULDOVRU
UHDFWLYHPHWDOVFDQFDXVHH[SORVLRQRU¿UH
Do not pick up.

5 ICE RS26 / RS28-OB / RS32
OPERATOR MANUAL
MACHINE COMPONENTS
1. Solution tank
2. +RVH¿OOSRUW&DS
3. Squeegee assembly
4. Wheels, 10 inch
5. Scrub head assembly
6. Side squeegee assembly
7. Watching window, on-
board battery charger
8. Brake pedal
9. Propel pedal
10. Front drive wheel
11. Operator seat
12. Steering wheel
13. LED light, work
14. Adjusting handle, seat
15. Off-board battery
charger receptacle
16. Detergent level watching
window
17. Warning light
18. Recovery tank cover
19. Recovery tank
20. Cup holder
21. Cap
22. Detergent bottle
23. Battery box

6 ICE RS26 / RS28-OB / RS32
OPERATOR MANUAL
MACHINE COMPONENTS
24. Directional switch
25. Main power key switch
26. Emergency stop switch
27. Warning light switch
28. Vacuum motor switch & indicator
29. Detergent dosage adjusting
buttons & indicator
30. Batteries meter
31. LED display screen
32. Fault indicator
33. Fault code
34. Fault message
35. Hour meter
6ROXWLRQÀRZDGMXVWLQJEXWWRQV
indicator
37. Horn button
38. 1-Step switch & Indicator
39. Brush pressure adjusting button
& indicator
40. Drain hose, recovery tank
41. Drain hose, solution tank
42. Vacuum hose

7 ICE RS26 / RS28-OB / RS32
OPERATOR MANUAL
UNCRATING MACHINE
Be sure and check packing carton for any damage.
Immediately report any damage to carrier. Check
the contents of package to ensure that the
following items are included:
 Machine
 4-6V Batteries
 Squeegee assembly
 2-Pad drivers
1. Uncrate the wooden box, place the top board
on the edge of pallet, lie in the front of the
machine, as below shown.
WARNING: Do not operate machine unless
\RXKDYHUHDGXQGHUVWRRGWKLVPDQXDO
2. Install batteries.(see INSTALLING BATTERIES)
3. Turn on the Main power key switch (machine
components, #25), make sure the Squeegee
assembly (machine components, #3) and the
Scrub head assembly (machine components,
LVRIIWKHÀRRU
4. Sit in the Operator seat (machine components,
#11), hold the Steering wheel (machine
components, #12), press the Propel pedal
(machine components, #9) and driving slowly
the machine down from the slope.
INSTALLING BATTERIES
WARNING: Batteries emit hydrogen gas.
([SORVLRQRU¿UHFDQUHVXOWIURPK\GURJHQ
JDV.HHSVSDUNVDQGRSHQÀDPHVDZD\.HHS
EDWWHU\FRPSDUWPHQWRSHQZKHQFKDUJLQJ
5HFRPPHQGHGEDWWHU\VSHF
4-6V, 260AH@20HR deep cycle batteries.
0D[EDWWHULHVGLPHQVLRQV
300mm (L) X 180mm (W) X 290mm (H)
1. Turn the Main power key switch off.
2. Remove the Operator seat & the Battery box
(machine components, #23).
3. Carefully place the batteries into the
FRPSDUWPHQWDVVKRZQLQ¿JXUHEHORZ3ODFH
the battery brace at the rear of the batteries.
NOTE: Do not drop the batteries into the
compartment!
4. Connect battery cables to posts in numbered
order as shown in drawing below.
NOTE: RED to POSITIVE and BLACK to
NEGATIVE.
5. Reinstall the Operator seat and the Battery box.
MACHINE SET UP
INSTALLING BRUSHES OR PADS
1. Turn off the 1-Step switch (machine
components, #38) and raise the Scrub head
DVVHPEO\RIIWKHÀRRUWKHQVWRSPDFKLQHRQWKH
level surface, remove the key and ensure the
machine is turned off.
2. ,IXVLQJWKHSDGGULYHU¿UVWDWWDFKWKH
appropriate pad to the pad driver surface.
3. Align the pad driver or brush under the motor
hub and push it upward to engage.
4. To remove the pad driver or brush, raise the
scrub head and remove the Side squeegee
assembly (machine components, #6), push the
edge of brush downward.
0$&+,1(6(783,167$//$7,21

8 ICE RS26 / RS28-OB / RS32
OPERATOR MANUAL
5. For Orbital head model RS28-OB, you need
to attach a rectangular 28in (710mm) ×14in
(356mm) pad to the Orbital Pad driver, align the
pad to the orbital pad driver, press from to back
and side to side to alignment.
MOUNTING THE SQUEEGEE ASSEMBLY
1. Turn off the 1-Step switch and raise the
6TXHHJHHDVVHPEO\RIIWKHÀRRU
2. Mount the squeegee assembly to the squeegee
pivot bracket. make sure the knobs are
completely seated into the slots before securing
knobs.
3. Connect the Vacuum hose (machine
components, #42) to the squeegee assembly.
Loop the hose by using the hose clip provided.
4. Check the squeegee blades for proper
adjustment.
FILLING THE SOLUTION TANK
7KHPDFKLQHLVHTXLSSHGZLWKD+RVH¿OOSRUW
(machine components, #2) at the side of the
PDFKLQHDQGDEXFNHW¿OOSRUWORFDWHGXQGHUWKH
recovery tank.
NOTE: BeIore accessinJthe bXcNet ¿OOport
make sure that the recovery tank is empty.
:hen ¿OOinJthe soOution tank Zith a bucket
make sure that the bucket is cOean. Do not use
the same bucket Ior ¿OOinJand draininJthe
machine.
:$51,1*'RQRWSXWDQ\ÀDPPDEOH
materials into solution tank. this can cause an
H[SORVLRQRUD¿UH
FILLING THE DETERGENT BOTTLE
The machine is equipped with a 6 liters Detergent
bottle (machine components, #22). Open the Cap
PDFKLQHFRPSRQHQWV\RXFDQ¿OOGHWHUJHQW
and watch the liquid level on the Detergent level
watching window (machine components, #16).
The ratio of water and detergent is 0~5%, you can
adjust this ratio via pressing the Detergent dosage
adjusting buttons (machine components, #29).
NOTE: OnOy use recommended cOeaninJ
chemicaOs. Contact your ManitoriaOsuppOy
distributor for recommendations on proper
chemicaOs.
WARNING: Do not operate machine
unless you have read and understand this
manual.
PRE-OPERATION CHECKS
1. Check the tank cover seals for damage.
2. Drain the recovery tank, check the vacuum fan
LQOHW¿OWHUFOHDQWKHPLIQHFHVVDU\
3. Check the vacuum hose for debris or blockage.
4. Check the squeegees for damage, wear and for
GHÀHFWLRQDGMXVWPHQW
5. Check whether Pad/Bruch is installed properly .
6. Check the brakes and steering for proper
operation.
OPERATION THE MACHINE
1. Sit in the Operator seat, adjusting the seat
to comfortable place by pushing the Seat
adjustment handle (machine components, #14).
NOTE: The machine ZiOO not traveOunOess the
operator is sitting in the operator seat.
2. Turn on the machine.
Check the LED display screen (machine
components, #31) , if there are fault codes
(machine components, #33) and the Fault
indicator (machine components, #32) is blink,
please Do Not operation the machine unless the
faults have been eliminated (please see FAULT
CODES AND ELIMINATE section).
3. Select the preferred settings by pressing the
Brush pressure adjusting buttons (machine
FRPSRQHQWV6ROXWLRQÀRZDGMXVWLQJ
buttons (machine components, #36) and
Detergent dosage adjusting buttons.
NOTE: 8se the minimaOpressure and ÀoZ
as possibOe.
4. Turn on the 1-Step switch, the Scrub head
assembly and the Squeegee assembly will
lower down automatically, all the presetting
functions will turn on.
5. The machine can scrub in both forward and
backward, place the Directional switch (machine
components, #24) in the forward direction is to
move forward, backward is to move backward.
The horn will sound and the squeegee will
raise automatically (the vacuum motor will turn
off after a short delay) when drive machine
backwards. This is to prevents damaging the
squeegee.
NOTE: Go sOoZZhen drive machine
backZards.
MACHINE OPERATION

9 ICE RS26 / RS28-OB / RS32
OPERATOR MANUAL
6. Press the Propel pedal, the machine start
scrubbing, the speed can be adjusted by
controlling the force of foot stepping, light is
slow, heavy is fast.
NOTE: Go sOoZon incOines and sOippery
surfaces.
7. To stop scrubbing, turn off the 1-Step switch,
the scrub head will raise automatically, the
squeegee will also raise after a short delay (the
YDFXXPLQGLFDWRUÀDVKLQJSOHDVHNHHSPRYLQJ
until the dirty water is picked up, and then
release the propel pedal and stop scrubbing.
8. Turn off the machine.
BRAKE DEVICE
The machine is drived by the Front drive wheel
(machine components, #10), that is equipped
with a brake device. When you release the Propel
pedal, the machine will stop travel, the park brake
will engage after a short delay.
The machine is equipped with a Brake pedal
(machine components, #8), that can be used to
control the machine if quicker stopping is needed
or if operating on an incline.
EMERGENCY STOP BUTTON
The machine is equipped with an Emergency stop
button (machine components, #26), please push
it if an emergency, that will shut off all power of
machine and brake immediately.
To restart the machine, please reset the
Emergency stop button, and turn off the Main
power key switch, then turn on key switch.
NOTE: POease hoOd the steering ZheeOZhen
emergency stop.
WARNING: Fire Or Explosion Hazard. Do
1RW3LFN8S)ODPPDEOH0DWHULDOV2U5HDFWLYH
Metals.
1. Go slow on inclines and slippery surfaces, go
slow when turn and reverse. Do not operate the
machine on inclines that exceed 7% (4°).
2. Drive machine in a straight path as possible,
avoid turning the Steering wheel too sharply
when machine is in motion. avoid sudden turns
except emergencies.
3. Do not keep the machine in the same position
with pad / brush spinning, keep the machine
PRYLQJWRSUHYHQWGDPDJHWRÀRRU¿QLVK
4. If the squeegee assembly leaves streaks on the
ÀRRUUDLVHWKHVTXHHJHHRIIWKHÀRRUDQGZLSH
the blades down with a damp cloth. Pre-sweep
WKHDUHDWRSUHYHQWOHDYLQJVWUHDNVRQWKHÀRRU
5. To obtain the optimum cleaning performance,
you can adjust the brush pressure, solution
ÀRZDQGGHWHUJHQWGRVDJHDV\RXUUHTXLUHG,I
poor picking up water performance is observed,
please stop scrubbing and check the squeegee
blade, adjust or replace if necessary.
6. If the dirty water path exceed the width of
squeegee, please adjust the side squeegee
assembly.
7. Pour a recommended defoamer into the
recovery tank if excessive foam appears.
WARNING: The foam do not activate
water level switch, excessive foam may result
in vacuum motor damage.
8. Press the Horn button (machine components,
#37) to alert if necessary.
9. The machine is equipped with a Warning light
(machine components, #17), you can select turn
ON or OFF by the Warning light switch (machine
components, #27).
10. If there is a fault code F10 (Batt low) on the
LED display screen, the machine will stop
scrubbing and alarm, please drive the machine
to charging.
11. If there is a fault code F08 (Rec Tank Full)
on the LED display screen, the vacuum motor
will stop working and alarm, please drive the
machine to drain water.
If there is a fault code F09 (Soln Tank Empty)
on the LED display screen, the Detergent
V\VWHPZLOOVWRSZRUNLQJDQGDODUPSOHDVH¿OO
the solution tank.
12. If there are other fault codes on the LED
display screen, please turn off the machine,
eliminate the fault (please see FAULT CODES
AND ELIMINATE section), then restart machine.
13. For heavily soiled areas, please use DOUBLE
SCRUBBING mode.
7KH¿UVWWLPH7XUQRQWKH6WHSVZLWFKWKHQ
press the Vacuum motor switch (machine
components, #28), its indicator will turn off and
the squeegee will raise automatically, then start
to scrubbing this areas without picking up water.
The second time: turn on the Vacuum
motor switch, the squeegee will lower down
automatically, and then start to scrubbing and
picking up water.
14. If you only want to pick up water needn't
scrubbing, Turn on the Vacuum motor switch
(squeegee will lower down) and turn off the
1-Step switch (if it is ON), the scrub head will
raise and then start to working.
WHILE OPERATING MACHINE

10 ICE RS26 / RS28-OB / RS32
OPERATOR MANUAL
BATTERY CHARGING
PREVENTATIVE MAINTENANCE
TANK DRAINING
DRAINING THE RECOVERY TANK
$Q\WLPHVFUXEELQJLVFRPSOHWHGRUZKHQUH¿OOLQJ
solution tank, the recovery tank should be drained
and cleaned.
WARNING: If the recovery tank is not
GUDLQHGZKHQWKHVROXWLRQWDQNKDVEHHQ
UH¿OOHGIRDPRUZDWHUPD\HQWHUWKHÀRDWVKXW
off screen and cause damage to the vacuum
motor.
1. While holding the Recovery tank drain hose
(machine components, #40) upward, remove
the cap and lower hose to drain.
2. Open the Recovery tank cover (machine
components, #18) and rinse out the tank. Use
a rag to remove any excess dirt. Clean the
YDFXXPIDQLQOHW¿OWHUORFDWHGLQWKHUHFRYHU\
tank .
DRAINING THE SOLUTION TANK
Any time scrubbing operation is completed, the
solution tank should be drained and cleaned.
1. While holding the Solution tank drain hose
(machine components, #41) upward, remove
the cap and lower hose to drain.
2. Rinse the solution tank with clean water after
every use. This will help prevent chemical
buildup and clogging of the solution lines.
WARNING: Fire Or Explosion Hazard.
Batteries Emit Hydrogen Gas. Keep Sparks and
Open Flame Away. Keep Battery Compartment
Propped Open When Charging.
8se onOy apprved chargers Zith the foOOoZing
speci¿cations:
 Automatic shut off circuit
 Deep cycle charging
 Output current of 20-30 Amps
 Output voltage of 24 volts
ON-BOARD BATTERY CHARGER
$VVWDQGDUGFRQ¿JXUDWLRQWKHPDFKLQHLVHTXLSHG
with the On-board battery charger. The settings
of On-board battery charger had been set for the
recommended batteries type.
WARNING: 7KH2QERDUGEDWWHU\
FKDUJHUVHWWLQJVFKDQJHDUHWREHFRPSOHWHG
E\DXWKRUL]HGVHUYLFHFHQWHUVRQO\)DLOXUH
WRSURSHUO\VHWZLOOUHVXOWLQWKHEDWWHULHVRU
charger damage.
1. Transport the machine to a well ventilated area.
2. Turn the machine off.
3. If charging wet (lead acid) batteries check the
ÀXLGOHYHOEHIRUHFKDUJLQJ
4. Prop up the Operator seat by the support stand
for ventilation.
5. Connect the charger's AC power supply cord to
a properly grounded receptable.
6. The charger will automatically begin to charge,
you can watching the charging status on the
window (machine components, #7), once the
charging cycle begins, the indicator lights will
progress from red, yellow to green. when the
green indicator light comes on, the charging
cycle is done. Unplug the charger cord.
NOTE: The machine ZiOO can not operate
Zhen charging.
WARNING: Before performing any
PDLQWHQDQFHRQWKHPDFKLQHEHVXUHWKDW
WKHSRZHULVWXUQHGRIIRUWKHEDWWHULHVDUH
disconnected!
:$5,1*5HSDLUVDUHWREHFRPSOHWHG
E\$XWKRUL]HGVHUYLFHFHQWHUVRQO\$Q\UHSDLUV
FRPSOHWHGE\XQDXWKRUL]HGSHUVRQVZLOODYRLG
the warrenty.
DAILY MAINTENANCE
1. Remove pad driver/ brush and clean with
approved cleaner.
2. Drain recovery and solution tanks completely
and rinse out with clean water. Visually check
the recovery tank for debris and clean out as
necessary.
3. 5DLVHWKHVTXHHJHHDVVHPEO\RIIÀRRUDQGZLSH
it down with a damp towel. Be sure to store the
squeegee in the up position.

11 ICE RS26 / RS28-OB / RS32
OPERATOR MANUAL
4. 5HPRYHWKHYDFXXPIDQLQOHW¿OWHUDQGULQVHLW
out with clean water.
5. Clean machine with an approved cleaner and a
damp towel.
6. Recharge the batteries.
7. Check the condition of the squeegee blade
wiping edge, rotate blade if worn.
MONTHLY MAINTENANCE
1. Clean the battery tops to prevent corrosion.
2. Check for loose battery cable connections.
3. Inspect and clean the recovery tank cover seal.
Replace it if damaged.
4. Lubricate all grease points and pivot points with
silicon spray and approved grease.
5. Check the machine for loose nuts and bolts.
6. Check the machine for leaks.
MOTOR MAINTENANCE
1. Contact your local Distributor for any motor
maintenance.
2. Motor should have the brushes checked every
250 hours. Brushes should be replaced when
they are worn to a length of 10 mm or less.
BATTERY MAINTENANCE
WARNING: Batteries emit hydrogen gas
DQGDQH[SORVLRQR¿UHFDQUHVXOW.HHSVSDUNV
DQG¿UHDZD\IURPEDWWHULHVDWDOOWLPHV
:$51,1*:KHQHYHUVHUYLFLQJEDWWHULHV
EHVXUHWRZHDUSURWHFWLYHJORYHV$YRLG
FRQWDFWZLWKEDWWHU\DFLGDWDOOWLPHV
NOTE: )or the best machine performancekeep
batteries charged at aOO times. Do not Oet them
sit in a discharged condition.
1. Always follow the battery charging directions as
outlined in the BATTERY CHARGING section of
this manual.
2. Keep battery tops and terminals free from
corrosion. Astrong solution of baking soda
and water is the best way to keep the batteries
corrosion free. DO NOTALLOW THE BAKING
SODA / WATER SOLUTION TO ENTER THE
BATTERY CELLS.
3. Use a wire brush with the baking soda solution
to properly clean the battery posts and
connections.
4. Check battery connections for wear and loose
terminals. replace if necessary.
MACHINE STORAGE
1. Always store the machine indoors.
2. Always store the machine in a dry area.
3. Always store the machine in its upright position.
4. Always store the machine with the pad driver/
EUXVKUDLVHGRIIWKHÀRRU
5. Always store the machine with the squeegee
DVVHPEO\UDLVHGRIIWKHÀRRU
6. If storing in an area which may reach freezing
WHPSHUDWXUHVEHVXUHWRGUDLQDOOÀXLGVIURPWKH
machine prior to storage. Any damage caused
by freezing temperatures will not be covered by
the warranty.
7. Drain the recovery tank.
'UDLQWKHVROXWLRQWDQNRIDOOÀXLG
)$8/7&2'(62/87,21
The machine is equipped with a LED display
screen (see Machine components, item # 31), the
LED screen will display the operating hours (see
Machine components, item # 35) and the battery
level status (see Machine components, item # 30).
When the machine detects a fault, there will be a
Fault code (see Machine components, item #33)
& Fault message (see Machine components, item
#34) display on the LED screen, and the Fault
indicator (see Machine components, item #32) will
ÀDVKFRQWLQXRXVO\DFFRPSDQ\DQDXGLEOHDODUP
Occasionally.
Once fault occuring, please DO NOT continue
operate the machine unless the fault are eliminated.
Turn off the machine, then to solve the fault, the
fault code & message will be eliminated when
machine restart.
If the fault is occurred frequently, or the fault can't
be eliminated, please contact ICE service center.
Please refer to the below table to determine the
fault cause and the solution.

12 ICE RS26 / RS28-OB / RS32
OPERATOR MANUAL
FAULT
CODE FAULT MESSAGE FAULT CAUSE SOLUTION
F01 Seat Empty Not sit in the seat Sit in the operator seat
F02 Squeegee Actt O.L.
RE-START! Squeegee lifting actuator is overload
Turn off the machine,after a moment,
RE-START machine.
F03 Bru Actt O.L.
RESTART! Scrub head lifting actuator is overload
F04 Vac Mtr O.L.
RE-START! Vacuum motor overload
F05 Left Bru Mtr O.L.
RE-START! Left brush motor is overload
F06 Right Bru Mtr O.L.
RE-START! Right brush motor is overload
F07 Propel Mtr O.L.
RE-START! Propel motor overload
F08 RecTank Full Recovery tank is full Drain the Recovery tank
F09 Soln Tank empty Solution tank is empty Fill the solution tank
F10 Batt Low
Charge Batt Battery is low Charge the battery
F11 Batt Empty
Charge Batt NOW Battery is empty Charge the battery NOW
F12 Brake Wiring Error Bad Brake wiring Check the brake wiring
F13 Release Foot pedal Stepping the propel pedal when
starting machine Release the propel pedal
F14 Replace Brake Assy Bad Brake assembly Replace the brake assembly
F16 Control Unit Overheat!
Wait Control Unit Overheat Turn off the machine,after a moment, RE-START machine
F17 Replace Control Unit Control Unit Fault Replace the control unit
F18 Replace Accel Pedal Sensor Bad Accelerator pedal sensor Replace accelerator pedal sensor
F19 Replace Brake pedal sensor Bad Accelerator pedal sensor Replace accelerator pedal sensor
F20 Check Left Brush motor Bad left brush motor Check left brush motor/ wiring
F21 Check Vac Mtr Bad Vacuum motor or wiring Check the vacuum motor / Wiring
F22 Check Soln Solenoid Solution solenoid wiring fault Check the wiring & Contactors
F23 Replace Soln solenoid Bad Solution solenoid Replace the solution solenoid
F24 Check Propel Motor Bad propel motor Check the propel motor / Wiring
F25 Check Right Brush motor Bad right brush motor Check right brush motor/ wiring
F40 Check Proximity Sw Proximity switch fault Check the Proximity switch
F42 Replace Control Unit Bad Control Unit Replace the control unit
F43 Turn Dead Sw Off
RE-START! Emergency stop button activated Release emergency stop button and restart machine
F44 Replace Control Unit
Bad Control Unit Contact service center, Replace the
Control Unit
F45 Return Control Unit
F46 Return Control Unit
F47 Return Control Unit
F48 Return Control Unit
)$8/7&2'(62/87,21

13 ICE RS26 / RS28-OB / RS32
OPERATOR MANUAL
TECHNICAL SPECIFICATIONS
MODEL RS26
DUAL DISK RS32 DUAL DISK RS28-OB ORBITAL
LENGTH 61.6 in / 1,565 mm
WIDTH (MACHINE WITH
SCRUB HEAD) 32 in / 815 mm 37.4 in / 950 mm 31.5 in / 800 mm
HEIGHT 56.7 in / 1,440 mm
WEIGHT 618 lbs / 280 Kg 640 lbs / 290 Kg
WEIGHT WITH BATTERIES 880 lbs / 400 Kg 900 lbs / 410 Kg
RECOVERY TANK CAPACITY 29 Gal / 110 L
SOLUTION TANK CAPACITY 29 Gal / 110 L
SQUEEGEE WIDTH 33.8 in / 860 mm 40 in / 1,030 mm
CLEANING PATH WIDTH 26 in / 650 mm
( 2 x 13 inch) 32 in / 810 mm ( 2 x 16 inch) 28 in / 710 mm (28in x 14in Pad)
PRODUCTIVITY RATE PER
HOUR (IN THEORY) 46, 300 ft2
4,300 m255, 600 ft2 5,200 m249, 500 ft2 4,600 m2
TRAVEL SPEED
(TRANSPORT) 4 Mile / h
6.5 Km / h
MINIMUM AISLE TURN 71 in / 1,800 mm 75 in / 1,900 mm
PAD/BRUSH PRESSURE 80 lbs / 35 Kg 120 lbs / 55 Kg
165 lbs / 75 Kg
132 lbs / 60 Kg
165 lbs / 75 Kg
200 lbs / 90 Kg
SOLUTION FLOW 0 ~ 0.7 Gal / Min
0 ~ 2.7 L / Min
BATTERIES 4 x 6V, 240AH@20Hr
VOLTAGE 24V DC
DRIVE WHEEL 1.1 hp / 0.8 KW
BRUSH MOTOR (2) 0.6 hp / 0.45KW, 210 RPM 0.75 hp / 0.55KW,
2200 RPM
VIBRATIONS @ SEAT N/A < 2.5 m / s2
< 8.2 ft / s2
VACUUM MOTOR 0.6 hp / 0.45KW
VACUUM WATER LIFT (MAX) 70 in. H2O / 1780 mm. H2O
RUN TIME PER CHARGE 3~3.5 Hours 3.5~4.0 Hours
DECIBEL RATING AT
OPERATOR'S EAR, INDOORS 68 dB(A)
GRADE LEVEL, MAX Scrubbing: 4°/7% Transporting (empty):10°/17.5%

14 ICE RS26 / RS28-OB / RS32
6'8:92/9:
3'/4,8'3+-85;6

15 ICE RS26 / RS28-OB / RS32
6'8:92/9:
3'/4,8'3+-85;6
DIA
NO. PART NUMBER DESCRIPTION NO REQ'D
1 8310102 MAIN FRAME, WELDED 1
2 8310133 RUBBER GROMMET 5
38310930A PERISTALTIC PUMP, KIT 1
8310931 TUBING, PUMP 1
4 1421409 FLAT WASHER, M4×ׯ9×0.8 2
5 1422411 LOCK WASHER M4 2
6 1221412 SCREW, PAN HEAD, M4×12 2
78310119 10" WHEEL, PU TIRE 2
1612605 BALL BEARING,6205-2RS 4
8 1436025 RETAINING RING, 25MM 2
9 8310150 WHEEL CAP 2
10 6210131 NYLON, CLAMP 5
11 1421510 FLAT WASHER, M5×ׯ10×1.0 5
12 1221512 SCREW, PAN HEAD, M5×12 5
13 8310120 BRACKET, STAND 2
14 1421824 FLAT WASHER, M8×ׯ24×2.0 3
15 1422821 LOCK WASHER M8 3
16 1021825 BOLT, HEX, M8×25 3
17 8210118 STATIC STRAP 1
18 8310708A HORN, 24VDC, KIT 1
19 1421307 PLAT WASHER, M3×ׯ7×0.5 4
20 1211316 SCREW, PAN HEAD, M3×16 2

16 ICE RS26 / RS28-OB / RS32
6'8:92/9:
9:++8/4-*8/<+=.++2-85;6

17 ICE RS26 / RS28-OB / RS32
6'8:92/9:
9:++8/4-*8/<+=.++2-85;6
DIA
NO. PART NUMBER DESCRIPTION NO REQ'D
1 1113014 LOCK NUT, M14 1
2 1421428 FLAT WASHER, M14×ׯ28×2.0 1
38310602 STEERING WHEEL 1
8310699A CUSHION WITH ICE LOGO 1
4 8310608 BELLOWS, SHAFT, STEERING 1
5 1021825 BOLT, HEX HEAD, M8×25 8
6 1422821 LOCK WASHER, M8 6
7 1421816 FLAT WASHER, M18×ׯ16×1.6 4
8 8310609 BEARING, FLANGE 2
9 8310605 SHAFT, STEERING WHEEL 1
10 1654025 KEY, 4.75×4.75×25.4 2
11 8310604 U-JOINT 1
12 1534508 SET SCREW, M5 ×8 4
13 1123507 LOCK NUT, M5 3
14 1421510 FLAT WASHER, M5×ׯ10×1.0 3
15 6210131 CLAMP, NYLON 3
16 8310645 BRACKET, FLANGE BEARING 1
17 1021060 BOLT, HEX HEAD, M10×60 4
18 1422026 LOCK WASHER, M10 4
19 1421030 FLAT WASHER, M10×ׯ30×2.5 4
20 8310601 SUPPORT BRACKET, STEERING 1
21 1021820 BOLT, HEX HEAD, M8×20 4
22 1421824 FLAT WASHER, M14×ׯ24×2.0 8
23 8310640 ACCELERATOR/ BRAKE PEDAL 1
24 8310431 HALL SENSOR WITH CABLE 1
25 8310603 STEER-CONTROLASSY. 1
26 8310660 DRIVE WHEEL, 24VDC 800W 1
27 8310611 PU TIRE, DRIVER WHEEL 1
28 8310612 ARMATURE BRUSH 4
29 8310613 BRUSHES CONNECTION BOX 2
30 8310625A ELECTRICALLY RELEASED BRAKE 1

18 ICE RS26 / RS28-OB / RS32
6'8:92/9:
952;:/54:'41-85;6

19 ICE RS26 / RS28-OB / RS32
6'8:92/9:
952;:/54:'41-85;6
DIA
NO. PART NUMBER DESCRIPTION NO REQ'D
1 8310101 SOLUTION TANK 1
2 1221512 SCREW, PAN HEAD, M5×12 2
3 1421510 FLAT WASHER, M5×ׯ10×1.0 2
4 8113009 CLAMP, NYLON 2
5 1021820 BOLT, HEX HEAD, M8×20 12
6 1421824 FLAT WASHER, M8×ׯ24×2.0 13
7 8310139 PLATE 2
8 8310151A NON-SLIP MAT 2
9 8310132 FOOTREST PLATE 1
10 1222508 SCREW, M5×8 4
11 1512820 SCREW, HEX SOCKET, M8×20 2
12 1421816 FLAT WASHER, M8×ׯ16×1.6 2
13 8310140 JUNCTION PLATE 2
14 1422821 LOCK WASHER, M8 8
15 8310130 BRACKET, SOLUTION TANK MNTG 3
16 8310124 ELBOW, G1/2 1
17 8310142 NUT, M36 1
18 8310141 SEALING 2
19 8310238A SENSOR, SOLUTION LEVEL, KIT 1
20 8310125 CAP, SOLUTION TANK 1
21 1021825 BOLT, HEX HEAD, M8×25 1
22 8310225 SLEEVE, ׯ8.1×ׯ12.7×7.8 1
23 8310224 ARM, RECOVERY TANK SUPPORT 1
24 1962050 CLAMP, 2 INCH 1
25 8011030 HOSE ASSEMBLY 1
26 8310123 ADAPTER, STRAINER ASSY 1
27 8310122 STRAINER ASSY 1

20 ICE RS26 / RS28-OB / RS32
6'8:92/9:
8+)5<+8?:'41-85;6