ICOP Technology HMI-043T-EM41N-BF User manual

HMI-043T User’s Manual IUMHMI043T-01 Ver.1.0A Jul, 2014 i
User’s Manual
HMI-043T with RFID
DMP Vortex86 EXm Processor
Compact Panel PC with 4.3”Touchscreen
HMI-043T-EM41N-BF / BF01 / BF02
HMI-043T-EM41B-BF / BF01 / BF02
HMI-043T-EM42N-BF / BF01 / BF02
HMI-043T-EM42B-BF / BF01 / BF02
(Version 1.2A)

HMI-043T-RFID User’s Manual IUMHMI043T-BF Ver.1.2A Apr, 2017 i
REVISION
DATE
VERSION
DESCRIPTION
2016/08/17
Version 1.0A
New Release
2016/09/09
Version 1.1A
1. Correct the website Section 3.1
2. Correct Memory description of
Hardware Specifications
2017/04/14 Version 1.2A 1. Add serial number code on section 1.5.
2.Add pin assignment and standard pinout
for PoE on RJ45.

HMI-043T-RFID User’s Manual IUMHMI043T-BF Ver.1.2A Apr, 2017 iii
SAFETY INFORMATION
Read these Safety instructions carefully.
Please carry the unit with both hands, handle carefully.
Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
Do not expose your Panel PC to rain or moisture in order to prevent shock and fire
hazard.
Input voltage rated +5VDC for HMI-043T-EM4XX-BF series and +7~24VDC for
HMI-043T-EM4XX-BFXX series.
Operating temperature between -20~+60°C (-4F~+140°F).
Keep HMI-043T away from humidity.
Never touch un-insulated terminals or wire unless your power adaptor is
disconnected.
Locate your Panel PC as close as possible to the socket outline for easy access
and to avoid force caused by entangling of your arms with surrounding cables
from the Panel PC.
USB connectors are not supplied with Limited Power Sources.
If the equipment is not used for a long time, disconnect it from the power source to
avoid damage by transient overvoltage.
WARNING!
DO NOT ATTEMPT TO OPEN OR TO DISASSEMBLE THE CHASSIS (ENCASING) OF
THIS PRODUCT. PLEASE CONTACT YOUR DEALER FOR SERVICING FROM
QUALIFIED TECHNICIAN.

HMI-043T-RFID User’s Manual IUMHMI043T-BF Ver.1.2A Apr, 2017 iv
Content
Content .............................................................................................................................iv
Ch. 1 General Information................................................................................................. 1
1.1 Product Description................................................................................................. 2
1.2 Product Specifications............................................................................................. 3
1.3 Inspection standard for TFT-LCD Panel .................................................................. 6
1.4 Product Dimensions ................................................................................................ 8
1.5 Ordering Information.............................................................................................. 10
Ch. 2 System Installation ................................................................................................ 13
2.2 Connector Summary.............................................................................................. 16
2.3 Connector Pin Assignments .................................................................................. 18
2.4 Connector I/O & LEDs Overview........................................................................... 23
2.5 Wall Mount Kit Overview (Optional)...................................................................... 25
Ch. 3 Driver Installation................................................................................................... 27
3.1 HMI-043T Development Note................................................................................ 29
Warranty.......................................................................................................................... 30

HMI-043T-RFID User’s Manual IUMHMI043T-BF Ver.1.2A Apr, 2017 1
Ch. 1
General Information
1.1 Product Description
1.2 Product Specifications
1.3 Inspection standard for TFT-LCD Panel
1.4 Product Dimensions
1.5 Odering Information

HMI-043T-RFID User’s Manual IUMHMI043T-BF Ver.1.2A Apr, 2017 2
1.1 Product Description
ICOP Technology Inc. is proudly going to release a brand new HMI, which offers fanless
design, low power consumption, and IP65 front panel. The HMI-043T with RFID is powered by
DMP Vortex86Exm SoC, the new generation SoC of Vortex86 family, which is included
128MB/256MB memory, eMMC Flash memory, and RFID reader. The resistive touch panel
with LED backlight TFT LCD increases operation convenience and visibility in outdoor
environments. The ultra-compact and thin exterior design is perfect for the present demanding
embedded and productive applications.
The new HMI-043T with RFID inherited PDX/PMX-series’smooth appearance and
ultra-texture aluminum exterior design to make your industrial applications look more stylish. The
versatile I/O ports, 10/100Mps Ethernet, RS/232/485 , GPIO and Can bus etc. can fulfill
fundamental functions. Our consistent advantages feature stable performance, extended
working temperature support, low power consumption and fanless design. The open frame
model can be accommodated connectivity requirements to industrial machine platforms and
industrial automation equipment’s needs.
HMI-043T with RFID is not only supporting DOS, Linux, and Windows Embedded CE, but
also compatible with Arduino platform, which is an open-source electronics prototyping platform
based on flexible, easy to use hardware and software to meet ready-to-market demand and
provide competitive advantages for customers.

HMI-043T-RFID User’s Manual IUMHMI043T-BF Ver.1.2A Apr, 2017 3
1.2 Product Specifications
HARDWARE SPECIFICATIONS
CPU
DMP Vortex86Exm 400MHz
BIOS
Coreboot BIOS
Cache
L1:16KB I-Cache, 16KB D-Cache
L2: 4-way, 128KB L2 Cache
Memory
Integrated 128MB / 256MB DDRIII
Nand-Flash
512MB/4GB eMMC onboard (Optional)
Wireless / Network
Integrated 10/100Mbps Ethernet x 1
HF RFID Reader x 1
PoE (Optional)
Optional upon 10/100Mbps Ethernet port x 1
Support IEEE 802.3AT, PoE/PD (Optional for HMI-043T-EM4XX-BFXX
series only)
Interface
HMI-043T-EM4XX-BF series:
Mic-in x 1
SPK-L , SPK-R (connector) x 1
RS-232 x 1
RS-485 x 2
Can bus x 1
8-bit GPIO x 1
USB ports (Ver2.0) x 2
HMI-043T-EM4XX-BFXX series:
RS-232 x 1 or RS-485 x 1
USB ports (Ver2.0) x 1
Can bus x 1 (Optional)

HMI-043T-RFID User’s Manual IUMHMI043T-BF Ver.1.2A Apr, 2017 4
MECHANICAL & ENVIRONMENT
Power Requirement
HMI-043T-EM4XX-BF series: +5VDC
HMI-043T-EM4XX-BFXX series: +7 ~ 24VDC
Power Consumption
HMI-043T-EM4XX-BF series: +5V@2A
HMI-043T-EM4XX-BFXX series: +12V@1A
Operating Temperature
0~+50°C (+32~+122°F) / -20~+60°C (-4~+140°F)
Storage Temperature
-30~+70°C (-22~ +158°F)
Operating Humidity
0% ~ 90% Relative Humidity, Non-Condensing
Dimensions
HMI-043T-EM4XX-BF series:
129.1 x 95.0 x 13.9mm (5.08 x 3.74 x 0.55 inches)
HMI-043T-EM4XX-BFXX series:
129.1 x 95.0 x 34.3mm (5.08 x 3.74 x 1.35 inches)
Weight
HMI-043T-EM4XX-BF series: 165g
HMI-043T-EM4XX-BFXX series: 350g
LCD SPECIFICATIONS
Display Type
4.3” WQVGA TFT LCD
Backlight life
20,000 hrs
Display Resolution
480(W) x 272(H)
Luminance (cd/m2)
280 cd/m2
Contrast Ratio
450 : 1
Display Color
16.7M
Pixel Configuration
R.G.B Vertical Stripe
Viewing Direction
6 o’clock
Viewing Angle
Vertical 120o, Horizontal 140o
LED Life Time
20,000 hrs

HMI-043T-RFID User’s Manual IUMHMI043T-BF Ver.1.2A Apr, 2017 5
TOUCHSCREEN
Type
Analog Resistive
Resolution
Continuous
Surface Properties
3H / Anti-Glare
Transmittance
80%
Controller
PS/2 interface
Software Driver
DOS / Linux / WinCE
Durability
1 million

HMI-043T-RFID User’s Manual IUMHMI043T-BF Ver.1.2A Apr, 2017 6
1.3 Inspection standard for TFT-LCD Panel
DEFECT TYPE
LIMIT
Note
VISUAL
DEFECT
INTERNAL
SPOT
φ＜0.15mm
Ignore
Note1
0.15mm≦φ≦0.5mm
N≦4
0.5mm＜φ
N=0
FIBER
0.03mm<W≦0.1mm, L≦5mm
N≦3
Note1
1.0mm＜W, 1.5mm＜L
N=0
POLARIZER
BUBBLE
φ＜0.15mm
Ignore
Note1
0.15mm≦φ≦0.5mm
N≦2
0.5mm＜φ
N=0
Mura
It’ OK if mura is slight visible through 6%ND filter
ELECTRICAL
DEFECT
BRIGHT DOT
A Grade
B Grade
C Area
O Area
Total
C Area
O Area
Total
Note3
N≦0
N≦2
N≦2
N≦2
N≦3
N≦5
Note2
DARK DOT
N≦2
N≦3
N≦3
N≦3
N≦5
N≦8
TOTAL DOT
N≦4
N≦5
N≦6
N≦8
Note2
TWO ADJACENT DOT
N≦0
N≦1 pair
N≦1 pair
N≦1 pair
N≦1 pair
N≦1 pair
Note4
THREE OR MORE
ADJACENT DOT
NOT ALLOWED
LINE DEFECT
NOT ALLOWED
(1) One pixel consists of 3 sub-pixels, including R, G, and B dot. (Sub-pixel = Dot)
(2) Little bright Dot acceptitable under 6% ND-Filter.
(3) If require G0 grand (Total dot N≦0), please contact region sales.
[ Note 1 ] W: Width[mm]; L: Length[mm]; N: Number; φ: Average Diameter.
(a) White / Black Spot (b) Polarizer Bubble

HMI-043T-RFID User’s Manual IUMHMI043T-BF Ver.1.2A Apr, 2017 7
[ Note 2 ] Bright dot is defined through 6% transmission ND Filter as following.
[ Note 3 ] Display area
C Area: Center of display area O Area: Outer of display area
[ Note 4 ] Judge the defect dot and the adjacent dot as following. Allow below (as A, B, C and D
status) adjacent defect dots, including bright and dark adjacent dot. And they will be counted 2 defect
dots in total quantity.
R
R
G
G
R G
R
R
G
G
R G
R
R
G
G
R G
R
R
G
G
R G
R
R
G
G
R G
R
R
G
G
R G
R
RDefect Dot
Adjacent Dot
A
B
C
D
The defects that are not defined above and considered to be problem shall be reviewed and
discussed by both parties.
Defects on the Black Matrix, out of Display area, are not considered as a defect or counted.

HMI-043T-RFID User’s Manual IUMHMI043T-BF Ver.1.2A Apr, 2017 8
1.4 Product Dimensions

HMI-043T-RFID User’s Manual IUMHMI043T-BF Ver.1.2A Apr, 2017 9

HMI-043T-RFID User’s Manual IUMHMI043T-BF Ver.1.2A Apr, 2017 10
1.5 Ordering Information
SERIAL NUMBER CODE:
Product
Code
LCD
Size
CPU Type
CPU Clock
RAM
Flash onboard
I/O
HMI
043T
EM(EXm)
3 (300MHz)
4 (400MHz)
1 (128MB)
2 (256MB)
N (No Flash)
B (512MB)
E (4GB)
O (Open Frame)
B (O type + Case)
B01 (B type + I/O board with case)
B02 (B type + PoE I/O board with case)
BC1(B type + CAN I/O board with case)
BF (O type + Case + RFID)
BF01 (B type + I/O board with case + RFID)
BF02 (B type + PoE I/O board with case + RFID)
BFC1(B type + CAN I/O board with case + RFID)
1. Product Code：Code 1~3。
HMI：HMI Series
2. LCD Size：Code 4~7。
043T：4.3” LCD with touchscreen。
3. CPU Type：Code 8~9。
EM：Vortex86EXm。
4. CPU Clock：Code 10。
3：300MHz。4：400MHz。
5. RAM：Code 11。
1：128MB。2：256MB。
6. Flash Onboard：Code 12。
N：No Flash。B：512MB。E：4GB。
7. I/O Code：Code 13~16。
O：Open Frame type with full function
B：Box type without I/O Board
(B01=Standard; B02=with PoE ; BC1=with CAN)
(BF01=Standard RFID; BF02=RFID with PoE ; BFC1=RFID with CAN)

HMI-043T-RFID User’s Manual IUMHMI043T-BF Ver.1.2A Apr, 2017 11
ORDING INFORMATION:
PART NUMBER
DESCRIPTION
HMI-043T-EM41N-BF
4.3” HMI w/128MB/RFID/8MBSPI/2U/1S/485/GPIO
/SPK/CAN/Front panel, but without daughter board
HMI-043T-EM41B-BF
4.3”HMI w/128MB/RFID/512MBeMMC/8MBSPI/2U/1S
/485/GPIO/SPK/CAN/Front panel, but without daughter
board CAN/Front panel, but without daughter board
HMI-043T-EM42N-BF
4.3” HMI w/256MB/RFID/8MBSPI/2U/1S/485/GPIO
/SPK/CAN/Front panel, but without daughter board
HMI-043T-EM42B-BF
4.3” HMI OP
w/256MB/RFID/512MBeMMC/8MBSPI/2U/1S/485
/GPIO/SPK/CAN//Front panel, but without daughter
board
CABLE-265OP-SET
HMI-043T Open Frame cable set for BF or OP type.
HMI-043T-EM41N-BF01
4.3" HMI w/128MB/RFID/SD/USB/RS232/485/DC+7-24V
HMI-043T-EM41N-BF02
4.3" HMI w/128MB/RFID/SD/USB/POE/RS232/485
/DC+7-24V
HMI-043T-EM41B-BF01
4.3" HMI w/128MB/512MB eMMc/RFID/USB
/RS232/485/DC+7-24V
HMI-043T-EM41B-BF02
4.3" HMI w/128MB/512MB eMMC/RFID/USB/POE
/RS232/485/DC+7-24V
HMI-043T-EM42N-BF01
4.3" HMI w/256MB/RFID/SD/USB/RS232/485/DC+7-24V
HMI-043T-EM42N-BF02
4.3" HMI w/256MB/RFID/USB/POE/RS232/485
/DC+7-24V
HMI-043T-EM42B-BF01
4.3" HMI w/256MB/512MB eMMC/RFID/USB/RS232/485
/DC+7-24V
HMI-043T-EM42B-BF02
4.3" HMI w/256MB/512MB eMMC/RFID/USB/POE
/RS232/485/DC+7-24V

HMI-043T-RFID User’s Manual IUMHMI043T-BF Ver.1.2A Apr, 2017 12
PACKING LIST
PART NUMBER
PACKAGE
HMI-043T-EM41N-BF
HMI-043T-EM41N-BF *1
HMI-043T-EM41B-BF
HMI-043T-EM41B-BF *1
HMI-043T-EM42N-BF
HMI-043T-EM42N-BF *1
HMI-043T-EM42B-BF
HMI-043T-EM42B-BF *1
CABLE-265OP-SET
(Optional)
CABLE-265OP-485-15 x 3
CABLE-265OP-COM-15 x 1
CABLE-265OP-GPIO-15 x 1
CABLE-265OP-LAN-15 x 1
CABLE-265OP-USB-15 x 1
CABLE-265OP-USB-15-1 x 1
HMI-043T-EM41N-BF01
HMI-043T-EM41N-BF01 *1
HMI-043T-EM41N-BF02
HMI-043T-EM41N-BF02 *1
HMI-043T-EM41B-BF01
HMI-043T-EM41B-BF01 *1
HMI-043T-EM41B-BF02
HMI-043T-EM41B-BF02 *1
HMI-043T-EM42N-BF01
HMI-043T-EM42N-BF01 *1
HMI-043T-EM42N-BF02
HMI-043T-EM42N-BF02 *1
HMI-043T-EM42B-BF01
HMI-043T-EM42B-BF01 *1
HMI-043T-EM42B-BF02
HMI-043T-EM42B-BF02 *1
WLAN KIT (Optional)
USB-WLAN-IPEX-KIT
WIRELESS-ANTENNA-157MM
WIRELESS-CABLE-90MM

HMI-043T-RFID User’s Manual IUMHMI043T-BF Ver.1.2A Apr, 2017 13
Ch. 2
System Installation
2.1 CPU Board Outline
2.2 Connector Summary
2.3 Connector Pin Assignments
2.4 Connector I/O & LEDs Overview
2.5 Wall Mount Kit Overview

HMI-043T-RFID User’s Manual IUMHMI043T-BF Ver.1.2A Apr, 2017 14
2.1 CPU Board Outline
HMI-043T-EM4XX-BF type (without daughter board):
HMI-043T-EM4XX-BF CPU Board
J3
J4
J5
J6
J13
J14
J15
J2
J11
J12
J10
J8
J9
J1A
J1B

HMI-043T-RFID User’s Manual IUMHMI043T-BF Ver.1.2A Apr, 2017 15
HMI-043T-EM4XX-BFXX type:
J5
J9
J1A
LAN1
J3
J1B
J2
J8
HMI-043T-EM4XX-BFXX CPU Board
HMI-043T-EM4XX-BFXX I/O Board
J6
J3
J1A
J1B

HMI-043T-RFID User’s Manual IUMHMI043T-BF Ver.1.2A Apr, 2017 16
2.2 Connector Summary
HMI-043T-EM4XX-BF type (without daughter board):
No.
Description
Type of Connections
Pin #
J1A
Expansion slot
1.27mm 32x2-pin female box header
64-pin
J1B
Expansion slot
1.27mm 32x2-pin female box header
64-pin
J2
GPIO
1.25mm 10-pin wafer
10-pin
J3
JTAG (Debug USE)
1.25mm 6-pin wafer
6-pin
J4
USB
0.8mm 5-pin wafer
5-pin
J5
USB
1.25mm 5-pin wafer
5-pin
J6
LAN
1.25mm 4-pin wafer
4-pin
J8
RS-232
1.25mm 10-pin wafer
10-pin
J9
RS-485
1.25mm 3-pin wafer
3-pin
J10
RS-485
1.25mm 3-pin wafer
3-pin
J11
TOUCH
1.25mm 4-pin wafer
4-pin
J12
CAN
1.25mm 3-pin wafer
3-pin
J13
SPK-L
1.25mm 2-pin wafer
2-pin
J14
SPK-R
1.25mm 2-pin wafer
2-pin
J15
MIC-IN
1.25mm 4-pin wafer
4-pin