ICOP Technology VDX3-6724 User manual

To learn more about EMAC’s products and services and how they can help your project
http://ftp.emacinc.com/Tech_Info/About_EMAC_Products_and_Services.pdf
Authorized Distributor, Integrator, and Value-Added Reseller
Manual downloaded from ftp.emacinc.com
For purchase information please contact [e-mail]
For technical support please submit a ticket at www.emacinc.com/support

ICOP Technology Inc.
User Manual
VDX3-6724
with
DM&P Vortex86DX3 1GHz processor
Half-Size CPU Module with
4S/4USB/VGA/LCD/LVDS/
AUDIO/2LAN/GPIO/
1/2GB DDR3 Onboard
Version 2.0

VDX3-6724 User Manual
ICOP Technology Inc. 1
Copyright
The information in this manual is subject to change without notice for
continues improvement in the product. All rights are reserved. The manufacturer
assumers no reasonability for any inaccuracies that may be contained in this
document and makes no commitment to update or to keep current the
information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted,
in whole or in part, in any form or by any means without the prior to written
permission of ICOP Technology Inc.
Copyright ⓒ 2016 ICOP Technology Inc
Trademarks Acknowledgement
Vortex86DX3TM is the registered trademark of DM&P Electronics Inc. Other
brand names and product names that appear in this document are the properties
and registered trademarks of their respective owners. All names mentioned
herewith are served for identification purpose only.

VDX3-6724 User Manual
ICOP Technology Inc. 2
Revision History
Revision Date Remark
1.0 June 13, 2016 First release
2.0 June 8, 2016
New Add:
(1) Working temperature for Dual Core version
(2) Cable set for VDX3-6724 with Compact Flash

VDX3-6724 User Manual
ICOP Technology Inc. 3
Table of Contents
1.1 Overview ........................................................................................................................................ 5
1.2 Block diagram ................................................................................................................................ 5
1.3 Specifications ................................................................................................................................. 6
1.4 Ordering Information ................................................................................................................... 8
2 Hardware Information ................................................................................................................... 10
2.1 Board Dimension ........................................................................................................................ 10
2.2 Board Outline .............................................................................................................................. 11
2.3 Connector Summary ................................................................................................................... 13
2.4 Pin Assignments & Jumper Settings ......................................................................................... 14
J1: LCD .............................................................................................................................................. 14
J2: VGA ............................................................................................................................................. 15
J3: LVDS (24-bit Support Only) .................................................................................................... 15
J4: SATA DOM ................................................................................................................................ 15
J5: Power Connector (Terminal Block 5.0mm) ........................................................................... 16
J6: SATA DOM POWER ............................................................................................................... 16
J9: LAN1 (RJ45) ....................................................................................... 錯誤! 尚未定義書籤。
J10: LAN2 .......................................................................................................................................... 16
J11: USB0&1 ..................................................................................................................................... 16
J12: USB2&3 ..................................................................................................................................... 17
J13: GPIO (Port 6/7) ....................................................................................................................... 17
J15: RESET ....................................................................................................................................... 17
J17: COM1 RS232/485 D-Sub 9 pin ............................................................................................. 18
J18: COM2 RS232/485 ................................................................................................................... 18
J20: COM5 RS232 ............................................................................................................................ 18
J22: COM6 RS232 ............................................................................................................................ 18

VDX3-6724 User Manual
ICOP Technology Inc. 4
J24A: PC/104 Connector – 64 pin ................................................................................................ 20
J24B: PC/104 Connector – 40 pin ................................................................................................. 20
J28: Line-out ...................................................................................................................................... 21
J29: MIC-in ........................................................................................................................................ 21
J30: Touch screen (Optional) .......................................................................................................... 21
J31: Parallel ........................................................................................................................................ 22
System Mapping ................................................................................................................................ 23
3 Software Resources......................................................................................................................... 26
3.1 ICOP Technical Resource Website .......................................................................................... 26
4 Basic BIOS Setting ......................................................................................................................... 27
4.1 Introduction ................................................................................................................................. 27
4.2 CPU Clock Adjusting ................................................................................................................. 27
4.3 Console Redirection .................................................................................................................... 27
4.4 Serial Ports Switching ................................................................................................................. 28
4.5 IDE Configuration ...................................................................................................................... 29
4.6 Advanced PCI-PnP Setting ........................................................................................................ 30
4.7 ACPI Enable ................................................................................................................................ 31
5 Basic LCD Panel Setting ............................................................................................................ 32
5.1 Introduction ............................................................................................................................... 32
5.2 Pin Assignment of LVDS ........................................................................................................ 33
5.3 Basic BIOS Setting for LCD ................................................................................................... 33
Technical Support Directly from ICOP ................................................................................................ 35
User Manual Feedback ............................................................................................................................. 35
Appendix .................................................................................................................................................... 36
TFT Panel Data Output ...................................................................................................................... 36
Stacking Solution for Daughter Board .............................................................................................. 38
Warranty ..................................................................................................................................................... 40

VDX3-6724 User Manual
ICOP Technology Inc. 5
1 General Information
1.1 Overview
The VDX3-6724 is a low-power CPU module which compliant with ISA
standard. It takes the advantage of Vortex86DX3 1GHz x86 CPU which integrate
the SATA, I2C, VGA, LVDS, PS/2, USB, HD Audio and even with 16-bit ISA bus
support.
The VDX3-6724 is designed as a plug in replacement, with backward
compatibility to support legacy software to help extend existing product life cycle
without heavy re-engineering.
1.2 Block diagram
Board Block Diagram

VDX3-6724 User Manual
ICOP Technology Inc. 6
1.3 Specifications
Processor DM&P SoC CPU Vortex86DX3 - 1GHz
L1:32K I-Cache, 32K D-Cache, L2 Cache:512KB
RAM 1GB/2GB DDR3 Onboard
BIOS AMI BIOS
Bus PC/104 Standard Compliant
Display
Integrated 2D VGA chip with dual display support
(VGA + TTL / VGA + LVDS)
VGA: Maximum resolution up to 1920x1080 @ 60Hz
LVDS: Maximum resolution up to 1024x768 @ 60Hz
Single channel 24-bit LVDS
LAN Integrated 10/100Mbps Ethernet x1
Realtek 81111F GbE x1
Disk Support SATA DOM
Compact Flash (Optional)
Onboard eMMC 512MB/4GB (Optional)
I/O Interface RS232 x4
USB (ver. 2.0) x4
Parallel x1
HD Audio
16-bit GPIO x1
PS/2 touch controller x1 (Optional)
DOS hot SWAP x1 (Optional)
Connectors
2.54mm 26-pin box header for Parallel x1
2.54mm 20-pin box header for GPIO x1
2.54mm 10-pin box header for USB x2
2.54mm 10-pin box header for RS232 x3
2.54mm 2-pin pin header for Reset x1
2.54mm 104-pin PC/104 connector x1
2.0mm 44-pin box header for LCD x1
2.0mm 20-pin pin header for LVDS x1
2.0mm 8-pin pin header for Ethernet x1
1.25mm 4-pin wafer connector for Line-out/MIC-in x2
7-pin SATA connector for SATA DOM x1
2-pin box header for DC +5V output x1
15-pin D-Sub female connector for VGA x1
9-pin D-Sub male connector for RS232 x1
Type I/II Compact Flash slot x1 (Optional)
Terminal block for DC input x1
PS/2 connector for Keyboard/Mouse x1

VDX3-6724 User Manual
ICOP Technology Inc. 7
RJ45 connector for GbE x1
Power
Requirement DC +5V @ 1000mA (Typical)
Operating
Temp.
-20°C to +70°C (Single Core)
-10°C to +60°C (Dual Core)
-40°C to +85°C (Optional for Single Core)
-20°C to +70°C (Optional for Dual Core)
Dimensions 184 x 122mm
Weight 180g
O/S Support
Windows 7 Linux
Windows Embedded Compact 7 DOS
Windows XP Professional POS Ready (WePOS)
Windows Embedded Standard 7 QNX
Windows Embedded CE6.0 VxWorks
Windows Embedded 2009 Free BSD

VDX3-6724 User Manual
ICOP Technology Inc. 8
1.4 Ordering Information
Part Number Product Description
VDX3-6724-1G Vortex86DX3 Half-Size CPU Module with 1GB DDR3
VDX3-6724-2G Vortex86DX3 Half-Size CPU Module with 2GB DDR3
VDX3-6724-2C-1G Vortex86DX3 Half-Size Dual Core CPU Module with 1GB DDR3
VDX3-6724-2C-2G Vortex86DX3 Half-Size Dual Core CPU Module with 2GB DDR3
VDX3-6724-CF-1G Vortex86DX3 Half-Size CPU Module with 1GB DDR3
with CF card slot
VDX3-6724-2C-CF-1G
Vortex86DX3 Half-Size Dual Core CPU Module with 1GB DDR3
with CF card slot
VDX3-6724-CF-2G Vortex86DX3 Half-Size CPU Module with 2GB DDR3
with CF card slot
VDX3-6724-2C-CF-2G
Vortex86DX3 Half-Size Dual Core CPU Module with 1GB DDR3
with CF card slot
CABLE-6724-SET
GPIO (2.54) x1
RS-232 (2.54) x3
Audio Line x2
Printer (2.54) x1
USB (2.54) x2
NET 4x2 (2.0) x1
CABLE-6724-CF RS-232 (2.54) x3
Audio Line x2
USB (2.54) x2
NET 4x2 (2.0) x1
ICOP-0096 Vortex86 LVDS 18-bit Converter Kit for LCD Panel Display
CABLE-LVDS-30 18-Bit LVDS Cable
*Default setting for processor on VDX3-6724 is Single-core. If Dual-core processor is required,
please contact ICOP ([e-mail]).

VDX3-6724 User Manual
ICOP Technology Inc. 9
Storages:
Product Name MLC SLC 0°C to +70°C -40°C to +85°C
SDM-SST-2G-H-M V V
SDM-SST-4G-H-M V V
ISATA-8G-H-M V V
ISATA-16G-H-M V V
ISATA-32G-H-M V V
ISATA-4G-H-M-X V V
ISATA-8G-H-M-X V V
ISATA-16G-H-M-X V V
ISATA-32G-H-M-X V V
ISATA-1G-H-S V V
ISATA-2G-H-S V V
ISATA-4G-H-S V V
ISATA-8G-H-S V V
ISATA-16G-H-S V V
SDM-SST-2G-H-S-X V V
SDM-SST-4G-H-S-X V V
SDM-SST-8G-H-S-X V V
ISATA-16G-H-S-X V V
Demonstration of “SDM-SST” SATA DoM on VDX3-6724

VDX3-6724 User Manual
ICOP Technology Inc. 10
2 Hardware Information
2.1 Board Dimension

VDX3-6724 User Manual
ICOP Technology Inc. 11
2.2 Board Outline
VDX3-6724
Note:
1. COM RS232/485 is selected by BIOS.
2. Onboard SPI ROM (optional) and PS/2 Mouse will be disabled when Touch function
(optional) is selected.
3. GPIO will be occupied when eMMC is selected on VDX3-6724.
4. LPT, eMMC, and GPIO are not available on VDX3-6724-CF.
5. CF card slot is only available on VDX3-6724-CF. (see the image below)

VDX3-6724 User Manual
ICOP Technology Inc. 12
VDX3-6724-CF
TOP VIEW
BOTTOM VIEW

VDX3-6724 User Manual
ICOP Technology Inc. 13
2.3 Connector Summary
Nbr. Name Type of Connections Nbr of Pin
J1 LCD Box Header, 2.0mm, 2x22 44
J2 VGA 15-pin D-Sub Female 15
J3 LVDS (24 bits) Pin Header, 2.0mm, 10x2 20
J4 SATA DOM SATA 7P Connector, 7x1 7
J5 Power Connector Terminal Block, 5.0mm, 2x1 2
J6 SATA DOM Power Box Header, 2.0mm, 1x2 2
J8 PS/2 connector (Keyboard/Mouse) Mini-DIN Female 6
J9 LAN1 (10/100/1000) RJ45 Connector 8
J10 LAN2 (10/100) Pin Header, 2.0mm, 4x2 8
J11 USB0&1 Box Header, 2.54mm, 5x2 10
J12 USB2&3 Box Header, 2.54mm, 5x2 10
J13 GPIO (Port6/7) Box Header, 2.54mm, 10x2 20
J15 Reset Pin Header, 2.54mm, 1x2 2
J17 COM1(RS232/485 or optional TTL/P4) D-Sub Male 9
J18 COM2(RS232/485 or optional TTL/P5) Box Header, 2.54mm, 5x2 10
J20 COM5(RS232/485 or optional TTL/P0) Box Header, 2.54mm, 5x2 10
J22 COM6(RS232/485 or optional TTL/P1) Box Header, 2.54mm, 5x2 10
J24A PC104 Connector – 64 pins Box Header, 2.54mm, 32x2 64
J24B PC104 Connector – 40 pins Box Header, 2.54mm, 20x2 40
J28 Line-Out Wafer, 1.25mm, 4x1 4
J29 MIC-In Wafer, 1.25mm, 4x1 4
J30 Touch screen Controller
(Optional) Wafer, 1.25mm, 4x1 4
J31 Parallel Box Header, 2.0mm, 13x2 26
J34 Master/Slave for CF Card Slide switch 3
CF1 CF card slot
SP1 Buzzer

VDX3-6724 User Manual
ICOP Technology Inc. 14
2.4 Pin Assignments & Jumper Settings
J1: LCD
Pin# Signal Name Pin # Signal Name
1 +3.3V 2 +3.3V
3 LG2 4 LG3
5 LG4 6 LG5
7 NC 8 NC
9 LR0 10 LR1
11 LR2 12 LR3
13 LR4 14 LR5
15 GND 16 NC
17 NC 18 NC
19 NC 20 GND
21 NC 22 NC
23 LB0 24 LB1
25 LB2 26 LB3
27 LB4 28 LB5
29 NC 30 NC
31 LG0 32 LG1
33 GND 34 GND
35 NC 36 LCLK
37 NC 38 LDE
39 NC 40 LHSYNC
41 NC 42 LVSYNC
43 LBACKL 44 LVDDEN
(Please refer to Appendix for TFT Flat Panel Data Output)

VDX3-6724 User Manual
ICOP Technology Inc. 15
J2: VGA
Pin# Signal Name Pin # Signal Name
1. R OUT 2 G OUT
3 B OUT 4 NC
5 GND 6 GND
7 GND 8 GND
9 NC 10 GND
11 NC 12 DDCDAT
13 HSYNC 14 VSYNC
15 DDCCLK
J3: LVDS (24-bit Support Only)
J4: SATA DOM
Pin# Signal Name Pin # Signal Name
1 VCC3 (+3.3V) 2 VCC3 (+3.3V)
3 GND 4 GND
5 RxIN0+ 6 RxIN0-
7 RxIN1- 8 GND
9 GND 10 RxIN1+
11 RxIN2+ 12 RxIN2-
13 CKIN- 14 GND
15 GND 16 CKIN+
17 RxIN3- 18 GND
19 GND 20 GxIN3+
Pin# Signal Name Pin # Signal Name
1 GND 2 TX+
3 TX- 4 GND
5 RX- 6 RX+
7 GND

VDX3-6724 User Manual
ICOP Technology Inc. 16
J5: Power Connector (Terminal Block 5.0mm)
J6: SATA DOM POWER
J10: LAN2 (10/100)
J11: USB0&1
Pin# Signal Name Pin # Signal Name
1. VCC 2 VCC
3 LUSBD0- 4 LUSBD0-
5 LUSBD0+ 6 LUSBD1+
7 GND 8 GND
9 GGND 10 GGND
Pin# Signal Name
1 +5V
2 GND
Pin# Signal Name Pin # Signal Name
1 VCC 2 GND
Pin# Signal Name Pin # Signal Name
1 ATX+ 2 ATX-
3 ARX+ 4 LED0
5 LED0+ 6 ARX-
7 LED1+ 8 LED1

VDX3-6724 User Manual
ICOP Technology Inc. 17
J12: USB2&3
Pin# Signal Name Pin # Signal Name
1. VCC 2 VCC
3 LUSBD2- 4 LUSBD3-
5 LUSBD2+ 6 LUSBD3+
7 GND 8 GND
9 GGND 10 GGND
*USB3 supports DOS USB hot SWAP (Optional). For more detail, please contact ICOP sales.
J13: GPIO (Port 6/7)
Pin# Signal Name Pin # Signal Name
1. GND 2 VCC
3 GP60 4 GP70
5 GP61 6 GP71
7 GP62 8 GP72
9 GP63 10 GP73
11 GP64 12 GP74
13 GP65 14 GP75
15 GP66 16 GP76
17 GP67 18 GP77
19 VCC 20 GND
*When onboard eMMC is enabled, GPIO will be disabled.
**Not available on VDX3-6724-CF
J15: RESET
Pin# Signal Name Pin # Signal Name
1. RST_SW 2 GND

VDX3-6724 User Manual
ICOP Technology Inc. 18
J17: COM1 RS232/485 D-Sub 9 pin
Pin# Signal Name Pin # Signal Name
1. DCD1/1RS485- 2 RXD1/1RS485+
3 TXD1 4 DTR1
5 GND 6 DSR1
7 RTS1 8 CTS1
9 RI1 10 NC
J18: COM2 RS232/485
Pin# Signal Name Pin # Signal Name
1. DCD2/2RS485- 2 RXD2/2RS485+
3 TXD2 4 DTR2
5 GND 6 DSR2
7 RTS2 8 CTS2
9 RI2 10 NC
J20: COM5 RS232
Pin# Signal Name Pin # Signal Name
1. DCD5 2 RXD5
3 TXD5 4 DTR5
5 GND 6 DSR5
7 RTS5 8 CTS5
9 RI5 10 NC
J22: COM6 RS232
Pin# Signal Name Pin # Signal Name
1. DCD6 2 RXD6
3 TXD6 4 DTR6
5 GND 6 DSR6
7 RTS6 8 CTS6
9 RI6 10 NC
(Optional: TTL/ GPIO-P4)
(Optional: TTL/ GPIO-P5)
(Optional: TTL/ GPIO-P6)
(Optional: TTL/ GPIO-P1)