Icop VDX-6317-X User manual

VDX-6317-X
DM&P Vortex86DX 800MHz
Mity-Mite CPU Module
with 1S/USB/LAN/GPIO/PWMx16
256MB DDR2 Onboard
User’s Manual
(Revision 1.0A)

Copyright
The information in this manual is subject to change without notice for continuous improvement in
the product. All rights are reserved. The manufacturer assumes no responsibility for any
inaccuracies that may be contained in this document. And makes no commitment to update or to
keep current the information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part,
in any form or by any means without the prior written permission of the ICOP Technology Inc..
Copyright 2008 ICOPTechnology Inc.
Manual No. IUM6317000-01 Ver.1.0A March, 2010
Trademarks Acknowledgment
Vortex86DXis the registered trademark of ICOP Technology Inc.
Other brand names or product names appearing in this document are the properties
and registered trademarks of their respective owners. All names mentioned herewith
are served for identification purpose only.

T a b l e o f C o n t e n t s
T ab l e o f C o n t e nt s.............................................................iii
C h a p t e r 1 Introduction……………………………………………1
1.1 Packing List............................................................1
1.2 Product Description................................................2
1.3 Specifications.........................................................3
1.4 Board Dimension....................................................4
C h a p t e r 2 Installation……………………………………………..5
2.1 Board Outline.........................................................5
2.2 Connectors & Jumpers Location............................6
2.3 Connectors & Jumpers Summary...........................8
2.4 PinAssignments & Jumper Settings.......................9
2.5 System Mapping.................................................133
2.6 Watchdog Timer...................................................16
2.7 GPIO....................................................................17
2.8 SPI flash...............................................................18
2.9 PWM....................................................................19
3.0 IDE to SD.............................................................20
C h a p t e r 3 Driver Installation……………………………………21
Appendix ………………………………………………………………..22
A. TCP/IPlibrary for DOS real mode.............................22
B. BIOS Default Setting.................................................23
Warranty............................................................................................24

Vortex86DX-6317-X Vortex86DXMity-Mite CPU Module
1
C h a p t e r 1
Introduction
1.1 Packing List
Product Name Package
VDX-6317-X
Embedded Vortex86DX CPU All-in-One Board
Manual & Drivers CD x 1
RS232 cable x 1
IDE cable x 1
GPIO cable x 1
PS/2 Keyboard cable x 1
USB cable x 1 (Optional)

Vortex86DX-6317-X Vortex86DXMity-MiteCPUModule 2
1.2 Product Description
The VDX-6317-X family of low-power x86 embedded controller is designed to meet Tiny
specification, and integrated with the following features.
800MHz Vortex86DX System-On-Chip
256MB DDR2 system memory
Enhanced IDE (UltraDMA-100/66/33)
10/100Mbps Ethernet
1 USB 2.0 (host)
Up to 1 serial ports
16-bit GPIO x1
x-ISAbus
2 watchdog timer
PWM 16 channels
JTAG interface
AMI BIOS
4MB SPI flash
Single voltage +5V DC
Support extended operating
temperature range of -20°C to +70°C
The VDX-6317-X Tiny family of embedded controller is designed with backward compatibility in
mind, to provide migration path for projects facing end-of-life challenges with their existing x86
based Mity-Mite controller. The VDX-6317-X family of controller is designed as a plug in
replacement, with backward compatibility to support legacy software to help extend existing
product life cycle without heavy re-engineering.
VDX-6317-X is suitable for broad range of data-acquisition, Industrial automation, Process
control,Automotive controller,AVL, Intelligent Vehicle management devic,Medical device,
Human machine interface, Robotics, machinery controlAnd more…application that required
small footprint, low-power and low-cost hardware with open industry standard such asTiny.

Vortex86DX-6317-X Vortex86DXMity-MiteCPUModule 3
1.3 Specifications
Features VDX-6317-X
CPU DM&P SoC CPU Vortex86DX- 800MHz
Real Time Clock with Lithium Battery Backup
Cache L1:16K I-Cache, 16K D-Cache L2:128KB Cache
BIOS AMI BIOS
Bus Interface 16-bit x-ISA interface
System Memory 256MB DDR2 Onboard
Watchdog Timer Software programmable from 30.5 us to 512 seconds x2
sets(Watchdog 1 fully compatible with M6117D)
LAN Integrated 10/100M Ethernet
I /O Interface Enhanced IDE port (UltraDMA-100/66/33) x1
RS-232 port x1
USB port x1 (USB 2.0 version)
16-bit GPIO port x1
10/100Mbps Ethernet port x1
Connectors 2.00 mm 44-pin box header for IDE x1
2.00 mm 20-pin box header for 16-bit GPIO x1
2.00 mm 10-pin box header for RS-232 x1
2.00 mm 4-pin header for USB x1
2.54 mm 5-pin header for keyboard x1
1.25mm 6-pin Wafer for JTAG x1
External RJ-45 connector for Ethernet x1
Flash Disk Support
Onboard 4MB SPI Flash Disk (Driver: A)
44-pin IDE Flash Disk( EmbedDisk 16MB or above)
44-pin IDE to Micro SD (Optional)
PWM 16~24 Channels
Power Requirement Single Voltage +5V @ 380mA
Dimension 80mm X 50mm (3.14 x1.96 inches)
Weight 42g
Operating
Temperature -20oC ~ +70oC
-40°C ~ +85°C (Optional)

Vortex86DX-6317-X Vortex86DXMity-MiteCPUModule 4
1.4 Board Dimension

Vortex86DX-6317-X Vortex86DXMity-MiteCPUModule 5
C h a p t e r 2
Installation
2.1 Board Outline
Note: VGA function support (ICOP-2820) via x-ISA Interface
ICOP-2820: http://www.icop.com.tw/products_detail.asp?ProductID=7

Vortex86DX-6317-X Vortex86DXMity-MiteCPUModule 6
2.2 Connectors & Jumpers Location
Connectors

Vortex86DX-6317-X Vortex86DXMity-MiteCPUModule 7
Jumpers & LEDs

Vortex86DX-6317-X Vortex86DXMity-MiteCPUModule 8
2.3 Connectors & Jumpers Summary
Summary Table
Nbr Description Type of Connections Pin nbrs.
J1 GPIO (Port 0 / 1/ PWMx16) Box Header, 2.0,10x2 20-pin
J2 x-ISAConnector – 64 pin Box Header, 2.0, 32x2 64-pin
J3 PS/2 Keyboard Pin Header, 2,54,1x5 5-pin
J4 Power Connector Terminal Block 5.0,2x1 2-pin
J5 Buzzer Pin Header, 2,0,1x2 2-pin
J6 IDE Box Header, 2.0,22x2 44-pin
J7 COM1(TTL/ PWMx8 Optional) Box Header, 2.05x2 10-pin
J9 Console Redirection Pin Header, 2.54, 2x1 2-pin
JP1 USB Pin Header, 2,0,4x1 4-pin
JP2 JTAG Wafer, 1.25, 6x1 6-pin
LAN 10/100Base-TEthernet LAN RJ45 Connector 8-pin
PWR-LED PowerActive LED (Red) LED-SMD
IDE- LED IDEActive LED (Green ) LED-SMD
LED 2 LAN Duplex LED (Yellow ) LED-SMD
LED 3 LAN Link/Active LED (Green) LED-SMD

Vortex86DX-6317-X Vortex86DXMity-MiteCPUModule 9
2.4 Pin Assignments & Jumper Settings
J1: GPIO (Port 0 / 1/ PWMx16)
J2: x-ISA Connector – 64pin
Pin # Signal Name Pin # Signal Name
1 GND 2 SBHE
3 RSTDRV 4 SD7
5 VCC 6 SD6
7 SD8 8 SD5
9 SD9 10 SD4
11 SD10 12 SD3
13 SD11 14 SD2
15 SD12 16 SD1
17 SD13 18 SD0
19 GND 20 IOCHRDY
21 SMEMW 22 AEN
23 SMEMR 24 SA19
25 IOW 26 SA18
27 IOR 28 SA17
29 SD14 30 SA16
31 SD15 32 SA15
33 MEMCS16 34 SA14
35 ICOS16 36 SA13
37 REFRESH 38 SA12
Pin # Signal Name Pin # Signal Name
1 GND 2 VCC
3 GP00 4 GP10
5 GP01 6 GP11
7 GP02 8 GP12
9 GP03 10 GP13
11 GP04 12 GP14
13 GP05 14 GP15
15 GP06 16 GP16
17 GP07 18 GP17
19 VCC 20 GND

Vortex86DX-6317-X Vortex86DXMity-MiteCPUModule 10
39 SYSCLK 40 SA11
41 IRQ7 42 SA10
43 IRQ6 44 SA9
45 IRQ5 46 SA8
47 IRQ4 48 SA7
49 IRQ3 50 SA6
51 IRQ10 52 SA5
53 IRQ11 54 SA4
55 BALE 56 SA3
57 VCC 58 SA2
59 OSC 60 SA1
61 GND 62 SA0
63 IRQ12 64 IRQ14
J3: PS/2 Keyboard
Pin # Signal Name Pin # Signal Name
1 KBCLK 2 KBDAT
3 NC 4 GND
5 VCC
J4: Power Connector (Terminal Block 5.0mm)
Pin # Signal Name
1 +5V
2 GND

Vortex86DX-6317-X Vortex86DXMity-MiteCPUModule 11
J6: IDE (44 Pins)
J7: COM 1 (TTL / PWMx8 Optional)
Pin # Signal
Name Pin # Signal Name
1 DCD1 2 RXD1
3 TXD1 4 DTR1
5 GND 6 DSR1
7 RTS1 8 CTS1
9 RI1 10 NC
Pin # Signal Name Pin # Signal Name
1 IDERST 2 GND
3 IDED7 4 IDED8
5 IDED6 6 IDED9
7 IDED5 8 IDED10
9 IDED4 10 IDED11
11 IDED3 12 IDED12
13 IDED2 14 IDED13
15 IDED1 16 IDED14
17 IDED0 18 IDED15
19 GND 20 NC
21 IDEREQ 22 GND
23 IDEIOW 24 GND
25 IDEIOR 26 GND
27 ICHRDY 28 GND
29 IDEACK 30 GND
31 IDEINT 32 NC
33 IDESA1 34 IDECBLID
35 IDESA0 36 IDESA2
37 IDECS-0 38 IDECS1
39 IDELED 40 GND
41 VCC 42 VCC
43 GND 44 NC

Vortex86DX-6317-X Vortex86DXMity-MiteCPUModule 12
J9: Console Redirection
Pin # Signal Name Pin # Signal Name
1 Console 2 GND
JP1: USB
Pin # Signal Name Pin # Signal Name
1 VCC 2 LUSBD3-
3 LUSBD3+ 4 GND
JP2: JTAG
Pin # Signal Name Pin # Signal Name
1 VCC 2 GND
3 TCK 4 TDO
5 TDI 6 TMS

Vortex86DX-6317-X Vortex86DXMity-MiteCPUModule 13
2.5 System Mapping

Vortex86DX-6317-X Vortex86DXMity-MiteCPUModule 14

Vortex86DX-6317-X Vortex86DXMity-MiteCPUModule 15

Vortex86DX-6317-X Vortex86DXMity-MiteCPUModule 16
2.6 Watchdog Timer
There are two watchdog timers in Vortex86SX/DX CPU. One is compatible with M6117D
watchdog timer and the other is new. The M6117D compatible watchdog timer is called WDT0
and new one is called WDT1.
We also provide DOS, Linux and WinCE example for your reference. For more technical support,
please visit: http://www.dmp.com.tw/tech or download the PDF file:
http://www.dmp.com.tw/tech/vortex86dx/

Vortex86DX-6317-X Vortex86DXMity-MiteCPUModule 17
2.7 GPIO (General Purpose Input / Output)
40 GPIO pins are provided by the Vortex86SX/DX for general usage in the system. All GPIO pins
are independent and can be configured as inputs or outputs, with orwithout pull-up/pull-down
resistors.
We also offer DOS, Linux and WinCE example for your reference. For more technical support,
please visit: http://www.dmp.com.tw/tech or download the PDF file:
http://www.dmp.com.tw/tech/vortex86dx/