ICP DAS USA XP-8000-Atom-CE6 User manual

Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
-1
XP-8000-Atom-CE6 Quick Start Guide
Version 1.0.3, June 2012
Congratulations on purchasing XP-8000-Atom-CE6 - the most popular automation
solution for remote monitoring and control application. This Quick Start Guide intends
to provide information for getting started with XP-8000-Atom-CE6. Please also consult
the User Manual for detailed information on the setup and use of XP-8000-Atom-CE6.
In addition to this guide, the package includes the following items:
XP-8000-Atom-CE6 Module
2 GB CF card
Software Utility CD Screw Driver
XP-8141-Atom-CE6
XP-8341-Atom-CE6
XP-8741-Atom-CE6
(1C016)
2.4 mm
●XP-8000-Atom-CE6 User Manual
CD:\XPAC-ATOM-CE6\Document\User_Manual\
http://ftp.icpdas.com/pub/cd/xpac-atom-ce6/document/user_manual/
●XP-8000-Atom-CE6 Website
http://www.icpdas.com.tw/product/solutions/pac/xpac-atom/xpac-atom_introduction.html
•XP-8000-Atom-CE6 Quick Start Guide

Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
-2
XP-8000-Atom-CE6 Quick Start Guide
1
--------------------------------------------------------------------------------
Configuring the boot mode
Before starting any installation, be sure
that the switch is placed in the “0”
position.
2
--------------------------------------------------------------------------------
Connecting to PC, Monitor and Power Supply
i. Connect the LAN port to a router (or hub).
ii. Connect the USB mouse and USB keyboard to the USB port.
iii. Connect the monitor to the VGAport.
iv. Connect the +24 VDC power supply to PWR1 and GND terminals.

Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
-3
XP-8000-Atom-CE6 Quick Start Guide
3
--------------------------------------------------------------------------------
Inserting the I/O Modules
Only high profile I-8K and I-87K series modules can be plugged into
XP-8000-Atom-CE6.
For more information about
this expansion I/O modules,
please refer to
http://www.icpdas.com/products/PAC/xpac/IO
_Expansion.htm
4
--------------------------------------------------------------------------------
Changing the User Interface Language
The "Regional Settings" is a Windows CE functionality that allows users to
easily change the XP-8000-Atom-CE6 user interface with your native
language.
Step 1 Click “Start”>> “Settings” >> “Control Panel”, and then click
“Regional Options”

Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
-4
XP-8000-Atom-CE6 Quick Start Guide
Step 2 Click “User Interface Language”tab, choose your local language
from drop-down menu, and then click “OK”
Step 3 Click “OK”, and then reboot the XP-8000-Atom-CE6 for changes
to take effect
5
--------------------------------------------------------------------------------
Configure the XP-8000-Atom-CE6
The XPAC Utility is a tool kit designed to quickly control and configure
XP-8000-Atom-CE6.
Step 1 Double-click the “XPAC Utility”icon
located on the desktop

Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
-5
XP-8000-Atom-CE6 Quick Start Guide
Step 2 Configure the
IP(DHCP), FTP
Server, Auto
Execution, etc
6
--------------------------------------------------------------------------------
Configure I-87K Modules
DCON Utility is a tool kit designed to quickly control and configure I-87K
series expansion I/O modules on XP-8000-Atom-CE6.
Step 1 On XP-8000-Atom-CE6 side, double-click the server program,
“DCON_CE_Vxxx”
The “DCON_CE_Vxxx”are pre-installed on the XP-8000-Atom-CE6, located under
\System_Disk\Tools\DCON_CE

Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
-6
XP-8000-Atom-CE6 Quick Start Guide
Step 2 On PC side, double-click the “DCON Utility “
The “DCON Utility”can be installed from the CD that was provided with the package or by
downloading the latest version from ICP DAS web site.
CD:\XPAC-ATOM-CE6\PC_Tools\DCON_Utility\
http://ftp.icpdas.com/pub/cd/xpac-atom-ce6/pc_tools/dcon_utility/
Step 3 Click the “WINCE”common button

Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
-7
XP-8000-Atom-CE6 Quick Start Guide
Step 4 Click the “XPAC_CE”tab, type the IP address of the XP-8000-Atom-CE6,
and then click the “Connect to XPAC_CE”button
Tips & Warnings
If the DCON Utility cannot connect to XP-8000-Atom-CE6, the
Ethernet connection between the host PC and the
XP-8000-Atom-CE6 might be rejected by fire wall, please contact
with MIS to open the Ethernet port.

Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
-8
XP-8000-Atom-CE6 Quick Start Guide
Step 5 Click the module name from the list to enter the configure form and
control form
Tips & Warnings
If there is no operation within 30 seconds, the connection will
automatically close to release the COM port occupied.
After you have finished configuring your module(s), you may start to develop
your own applications. For detailed instructions and more applications, please
refer to XP-8000-Atom-CE6 User Manual.