ICP DAS USA GW-2200 Series User manual

Technical support: servic[email protected] P1
GW-2200 Series Quick Start
V1.0, Mar. 2020
What’s in the box?
Related Information
In addition to this guide, the package includes the following items:
GW-2200 Module x 1
Quick Start x1 (This Document)
GW Series Product Page:
https://www.icpdas.com/en/product/guide+Serial__Communication+Gatewa
y+tGW__Modbus__Gateway#1183
Documentation & Firmware:
https://www.icpdas.com/en/download/index.php?model=GW-2215i
NS-205/NS-205PSE/M-7000 Product Page (optional):
https://www.icpdas.com/en/product/guide+Industrial__Communication+Ethe
rnet__Communication+Ethernet__Switch#792
https://www.icpdas.com/en/product/guide+Remote__I_O__Module__and__
Unit+RS-485__I_O__Modules+I-7000#462

Technical support: servic[email protected] P2
1 Connecting the Power and Host PC
1) Make sure your PC has workable network settings.
Disable or well configure your Windows firewall and Anti-Virus firewall
first, else the “Search Servers” on Chapter 5 may not work. (Please
contact with your system Administrator)
2) Connect both the GW-2200 and your PC to the same sub network or the
same Ethernet switch.
3) Supply power (PoE or +12~+48 VDC)to the GW-2200.
Note : Please use the first RJ-45 jack (ETH1) to connect the PoE Switch
when using the PoE to power. The second RJ-45 jack (ETH2)
doesn’t support the PoE function.

Technical support: servic[email protected] P3
2 Installing Software on Your PC
Install eSearch Utility, which can be obtained from the
web site:
https://www.icpdas.com/en/download/index.php?nation=US&kind1=&model=&kw=
esearch
3 Wiring Notes
Wiring Notes for RS-232/485/422 Interfaces:
: Here, the RS-232 and RS-485 wiring is used as an example.
RS-232 Wiring
RS-422 Wiring
RS-485 Wiring
RxD
TxD
TxD
RxD
GND
GND
RTS
CTS
CTS
RTS
TxD+
RxD+
TxD-
RxD-
RxD+
TxD+
RxD-
TxD-
GND
GND
Data+
Data+
Data-
Data-
GND
GND

Technical support: servic[email protected] P4
4 Connecting the Modbus Devices
1) Connect the Modbus device (e.g., M-7022, optional) to the COM1 on GW-2200.
2) Supply power to the Modbus device (e.g., M-7022, Device ID:1).
Note: The wiring and supply power method depends on your Modbus
device.
RS-485 Wiring
RS-232 Wiring




Technical support: servic[email protected] P5
5 Configuring Network Settings
1) Double-click the eSearch Utility shortcut on the desktop.
2) Click the “Search Servers”to search your GW-2200.
3) Double-click the name of GW-2200 to open the “Configure Server
(UDP)”dialog box.
Factory Default Settings of GW-2200:
IP Address
192.168.255.1
Subnet Mask
255.255.0.0
Gateway
192.168.0.1
4) Contact your Network Administrator to obtain a correct network
configuration (such as IP/Mask/Gateway). Enter the network settings
and click “OK”. Note: The GW-2200 will use the new settings 2
seconds later.





Technical support: servic[email protected] P6
5) Wait 2 seconds and click “Search Servers”button again to ensure the
GW-2200 is working well with new configuration.
6) Click the name of GW-2200 to select it.
7) Click the “Web”button to log in to the web configuration pages.
(Or enter the URL address of the GW-2200 in the address bar of the
browser.)
6 Configuring the Serial Port




Technical support: servic[email protected] P7
1) Enter the password in the login password field and click “Submit”.
2) Click the “Port1”tab to display the “Port1 Settings”page.
3) Select the appropriate Baud Rate, Data Format and Modbus Protocol
(e.g., 19200, 8N2 and Modbus RTU) from the relevant drop down options.
Note: The Baud Rate, Data Format and Modbus protocol settings
depends on your Modbus device.
4) Click “Submit”to save your settings.

Use the default
password: admin





Technical support: servic[email protected] P8
7 Self-Test
1) In the eSearch Utility, select the “Modbus TCP Master”item from the
“Tools”menu to open the Modbus TCP Master Utility.
2) In the Modbus TCP Modbus Utility, enter the IP address of GW-2200 and
click “Connect”to connect the GW-2200.
3) Refer to “Protocol Description”section and type the Modbus command
in the “Command”field then click “Send command”.
4) If the response data is correct, it means the test is success.
Note: The Modbus command settings depends on your Modbus
device.



