ICP DAS USA PFN-2000 Series Use and care manual

How to update Firmware of PROFINET device?
Step 1: Download the PROFINET_FW_Update_Tool software and latest firmware of
PROFINET device.
PROFINET_FW_Update_Tool software => Download
Step 2: Please connect Ethernet cable to LAN2 to update firmware.
PFN-2000 series module Gateway and Converter module

Step 3: Please turn rotary switch to “E” and turn the “Power ON”.
Note 1: PFN-2000 series module =>
S1A, S1B, S2B LED ON and S2A LED OFF
Note 2: Gateway and Converter =>
AP, ERR LED OFF and BOOT LED ON

Step 4: Extract the firmware file.
Step 5: Right click "PFN_Update_Tool.exe" →“Properties”→ “Compatibility” →”Run
this program as an administrator” (for windows 7, 8).

Step 6: Double click "PFN_Update_Tool.exe" . Select product and press “OK” button.
Step 7: Please input device’s IP, and note that PROFIBET device’s IP must
have the same domain and different IP with PC.

Step 8: Please input device’s MAC address. You can find it at cover of device.
Step 9: Press “Start” button to update firmware.
Step 10: Firmware update success, please turn rotary switch to “0” and turn power on.

Step 11: You can use PFN_Tool or MiniOS7 Utility to confirm firmware version.
MiniOS7 Utility
PFN_Tool