ICP DAS USA I-2533 User manual

I-2533 CAN to Fiber Converter - QuickStart (Nov/2019)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
1
I-2533
CAN to Multi-Mode Fiber Converter
Quick Start Guide
1. Introduction
This quick start helps users to apply the I-2533 in users’ applications quickly. If users
need the details of I-2533, please refer to the I-2533 user manual. Users can free
download it from the web site as follows or get it from product CD (path:
CAN/Converter/I-2533).
https://www.icpdas-usa.com/i_2533.html
2. Hardware Installation
Before using I-2533, some things must be done.
1. Prepare one pair of I-2533.
2. Set the CAN baud rate of each I-2533 by using rotary switch. You
can refer to the following table for details. (If you set the rotary
switch to “A”, please use utility tool to do the configuration before.)

I-2533 CAN to Fiber Converter - QuickStart (Nov/2019)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
2

I-2533 CAN to Fiber Converter - QuickStart (Nov/2019)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
3

I-2533 CAN to Fiber Converter - QuickStart (Nov/2019)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
4
3. Utility Tool
When users want to use user-defined baud rate or set the message filter, I-2533 utility tool may
be needed. It can be free downloaded from the following web site or get it in the product CD
(path: CAN/Converter/I-2533
/Software) http://www.icpdas.com/products/Remote_IO/can_bus/i-2533.htm
After getting the utility tool, please follow the following steps to set the baud rate and message
filter.
Step0: Power off the I-2533. Set the rotary switch to “F”, and connect the PC available COM
port with the COM port of the I-2533. Users can find the communication cable in the product
box. When connecting to the COM port of I-2533, the TxD pin of the cable is connected to the
TXD pin of the COM port, RXD pin of the cable is connected to the RXD pin of the COM port,
and GND pin of the cable is connected to the GND pin of the COM port. Then, power on the
I2533.

I-2533 CAN to Fiber Converter - QuickStart (Nov/2019)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
5

I-2533 CAN to Fiber Converter - QuickStart (Nov/2019)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
6

I-2533 CAN to Fiber Converter - QuickStart (Nov/2019)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
7