ICP DAS USA I-7565M-HS User manual

Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved. E -mail: [e-mail] 1
Quick Start for
I-7565M-HS
Dec 2018, Version 1.0.1
What’s in the box?
In addition to this guide, the package includes the following
items:
Related Information
I-7565M-HS User Manual
http://ftp.icpdas.com/pub/cd/fieldbus_cd/can/converter/i-7565
m-hs/manual
I-7565M-HS Website
http://www.icpdas.com/root/product/solutions/industrial_comm
unication/fieldbus/can_bus/converter/i-7565m-hs.html
ICP DAS Website
http://www.icpdas.com/
I-7565M-HS
Screw Driver
(1C016)
USB cable
(CA-USB15)

Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved. E -mail: [e-mail] 2
1
-----------------------------------------------------------------------
Hardware Installation
Before using I-7565M-HS device, some things must be done.
Step 1: Prepare one I-7565M-HS device
Step 2: Determine if the terminal resistor is needed or
not
Check the application structure, and determine if the terminal
resistor is needed or not. You can find it at the position as follows.
Pin
No.
Description
1
ON: Active CAN1 terminal resistor
(default)
OFF: Inactive CAN1 terminal resistor
2
ON: Active CAN2 terminal resistor
(default)
OFF: Inactive CAN2 terminal resistor

Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved. E -mail: [e-mail] 3
Generally, if your application is as follows, we recommend you to
enable the terminal resistor.
If your application is like the structure as follows, the terminal
resistor is not needed.

Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved. E -mail: [e-mail] 4
Step 4: Connect the CAN port and USB port of the
I-7565M-HS.
The pin assignment and wire connection are as follows. When
finished, run your application with the I-7565M-HS.

Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved. E -mail: [e-mail] 5
I-7565-HS Utility is provided by ICP DAS to transmit / receive CAN
messages for CAN Bus communication testing easily and quickly.
Step 1: Install the I-7565-HS Utility
The software is located at:
http://ftp.icpdas.com/pub/cd/fieldbus_cd/can/converter/i-7565
m-hs/software/utility
Step 2: Setting up the I-7565M-HS module
1. Connect the PC available USB port with the USB port of the
I-7565M-HS device. Users can find the communication cable
(CA-USB15) in the product box.
2. Execute the I-7565-HS Utility tool.
2
--------------------------------------------
Utility tool

Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved. E -mail: [e-mail] 6
Step 3: Connect to I-7565M-HS module
When executing the Utility, the tool will try to scan all the
necessary I-7565M-HS modules and list all scanned module
information on “Module Name” location of the Utility “Connect”
frame. User can re-connect to re-scan the newer inserted
I-7565M-HS module.
Before connect to the module, user can set the CAN port operation
mode and CAN baudrate parameter of the module. Please refer to
the following steps to configure the I-7565M-HS device.
1: Click the “Connect to …” item to open the “Connect” frame of
Utility.

Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved. E -mail: [e-mail] 7
2: Select the necessary I-7565M-HS module.
3: On the “CAN Port Enable” and “CAN1/CAN2 Baud Rate”
location, user can set the CAN Bus, and other prarameters. The
detail functions of these parameters are list below.
[CAN Port Enable]
“Port Enable”:
Enable/Disable the CAN1/CAN2 port.
“Silent Mode” :
Set the CAN port into silent mode. When setting the CAN port into
silent mode, the CAN port will just receive CAN messages, no CAN
Ack command be sent to the CAN Bus.
[CAN Baudrate]
“Baud Rate”:
CAN Bus baud rate in used. Valid range: 10 ~ 1000 kbps.
“Sample Point”:
Sample point of CAN baud rate bit timing.
4: Press the “Connect” buttom to start to use the above setting to
send/receice CAN messages.

Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved. E -mail: [e-mail] 8
Step 4: Send, receive CAN messages
By using the I-7565-HS Utiltiy tool, user can send and receive CAN
messages via the I-7565M-HS devices.
Send CAN messages and check received CAN messages