ICP DAS USA I-7532 User manual

I-7532 Two Channel CAN Bus Bridge - QuickStart (Jul/2016)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
1
I-7532
Two Channel CAN Bus Bridge
Quick Start Guide
Product Website:
http://www.icpdas-usa.com/i_7532.html
1. Introduction
The I-7532 is a CAN bus bridge that can be used to integrate two CAN networks even
they implement different CAN baud rate. Compared with the I-7531, the I-7532 offers
more than 3 useful features. First, the transmission distance limitation of the CAN bus
system on each side of the I-7532 is independent, which means the total CAN network
distance can be extended. Second, when some errors (e.g. bit error) happened on one
CAN port of the I-7532, the other CAN port of the I-7532 will not be affected and can still
work correctly. Last, the baud rate and CAN message filter configuration of these two
CAN ports on the I-7532 is able to be tuned following users' applications. These
features mean that users can design their applications more flexible and efficient.
2. Appearance

I-7532 Two Channel CAN Bus Bridge - QuickStart (Jul/2016)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
2
3. Block Diagram
4. CANBaud Rotary Switch
Users can use the “CANBaud Rotary Switch” to change the CAN1 and CAN2 baud of I-
7532 and it supports 15 kinds of baud shown on Table 2-3. After changing the rotary
switch value, users need to reset I-7532 to take the setting effect. If the “CANBaud
Rotary Switch” is set to be „0‟, then I-7532 will go into module configuration mode and
others of “CANBaud Rotary Switch” will go into communication mode.

I-7532 Two Channel CAN Bus Bridge - QuickStart (Jul/2016)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
3
5. LED Indication