ICP DAS USA LRA-900-E User manual

Technical support：[e-mail] P1
LRA-900-E Quick Start
v1.0, Sep. 2018
What’s in the box?
In addition to this guide, the package includes the following items:
LRA-900-E x 1
ANT-109-01 x 1
Screw Driver x 1
Related Information
Product Page:
http://www.icpdas.com/root/product/solutions/industrial_wireless_communicati
on/wireless_solutions/lra-900-e.html
Document:
http://ftp.icpdas.com/pub/cd/usbcd/napdos/rf_modem/document/lra-900-e
Firmware:
http://ftp.icpdas.com/pub/cd/usbcd/napdos/rf_modem/firmware/lra-900-e

Technical support：[e-mail] P2
1 Connecting the Power and Host PC
1. Make sure your PC has workable network settings.
Disable or well configure your Windows firewall and Anti-Virus firewall first,
else the “Search Servers”on Chapter 4 may not work. (Please contact with
your system Administrator)
2. Connect both the LRA-900-E and your PC to the same sub network or the
same Ethernet switch.
3. Check that the Init/Run switch is in the “Run” position and set the
“Device ID” switch to necessary position.
4. Supply power (+10~+30 VDC) to the LRA-900-E.

Technical support：[e-mail] P3
2 Installing Software on Your PC
Install VxComm Utility, which can be obtained
from the web site:
http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/vxcomm_driver/windows/
3 Configuring Network Settings
1. Double-click the VxComm Utility shortcut on the desktop.
2. Click the “Search Servers” to search your LRA-900-E.
3. Double-click the name of LRA-900-E to open the “Configure Server (UDP)”
dialog box.
Factory Default Settings of LRA-900-E:
IP Address 192.168.255.1
Subnet Mask 255.255.0.0
Gateway 192.168.0.1

Technical support：[e-mail] P4
4. Contact your Network Administrator to obtain a correct network configuration
(such as IP/Mask/Gateway). Enter the network settings and click “OK”.
Note:The LRA-900-E will use the new settings 2 seconds later.
4 Configuring Virtual COM Port
1. Wait 2 seconds and click “Search Servers” button again to ensure the
LRA-900-E is working well with new configuration.
2. Click the name of LRA-900-E to select it.

Technical support：[e-mail] P5
3. Click the “Add Server[s]” button.
4. Assign a COM Port number and click “OK” to save your settings.
5. Click on LRA-900-E name and check the virtual COM Port mappings on the
PC.

Technical support：[e-mail] P6
6. Click the “Restart Driver” item in the “Tools” menu to display the “VxComm
Utility: Restarting Driver” dialog box.
7. Click the “Restart Driver” button.
Note that if you intend to use Internet Explorer, ensure that the cache
function is disabled in order to prevent broswer access errors, please
disable your Internet Explorer cache as follow: (If you are not using IE
browser, please skip this step.)
Step 1: Click “Tools” >> “Internet Options…” in the menu items.
Step 2: Click “General”tab and click the “Settings…” button in Temporary
Internet file frame.
Step 3: Click “Every visit to the page”and click the “OK” in Settings box
and Internet Options box.