ICP DAS USA SmartView TP-4100 User manual

Touch Panel Monitor User Manual, version 1.1.0, Last Revised: December 2015 Page: 1
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
TPM-4100/TP-4100/TP-2070/
TP-3080/TP-5120/TP-6150/
TP-7170 Touch Panel
Monitor User Manual

Touch Panel Monitor User Manual, version 1.1.0, Last Revised: December 2015 Page: 2
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
Warranty
All products manufactured by ICP DAS are under warranty regarding defective
materials for a period of one year, beginning from the date of delivery to the original
purchaser.
Warning
ICP DAS assumes no liability for any damage resulting from the use of this product.
ICP DAS reserves the right to change this manual at any time without notice. The
information furnished by ICP DAS is believed to be accurate and reliable. However,
no responsibility is assumed by ICP DAS for its use, nor for any infringements of
patents or other rights of third parties resulting from its use.
Copyright
Copyright © 2012 by ICP DAS Co., Ltd. All rights are reserved.
Trademarks
Names are used for identification purposes only and may be registered trademarks of
their respective companies.
Contact us
If you encounter any problems, please feel free to contact us.
You can rely on ICPDAS for a prompt quick response.
Email: [email protected]

Touch Panel Monitor User Manual, version 1.1.0, Last Revised: December 2015 Page: 3
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
Table of Contents
Table of Contents.............................................3
1. Introduction ..................................................6
1.1. Features.....................................................................8
1.2. Specifications.............................................................9
1.3. Dimension................................................................15
1.4. I/O interfaces............................................................29
1.5. Companion CD ........................................................31
1.6. System Setup...........................................................32
1.6.1. System Configuration .................................32
1.6.2. Panel Mounting........................................... 37
2. Touch Driver Setup....................................39
2.1. Windows CE 5.0 ......................................................40
2.1.1. USB Touch Driver....................................... 41
2.1.1.1. Installation for WinPAC-8000 and WinPAC-5000 42
2.1.1.2. Configuration for WinPAC-8000 and WinPAC-5000 44
2.1.1.3. Uninstalling the WinPAC-8000 and WinPAC-5000 46
2.1.1.4. Other Windows CE5.0 Devices...47
2.1.2. Serial Touch Driver..................................... 48
2.1.2.1. Installation for WinPAC-8000 and WinPAC-5000 49
2.1.2.2. Configuration for WinPAC-8000 and WinPAC-5000 52
2.1.2.3. Uninstalling the WinPAC-8000 and WinPAC-5000 54
2.1.2.4. Other Windows CE5.0 Devices...55
2.2. Windows CE 6.0 ......................................................56
2.2.1. USB Touch Driver....................................... 57
2.2.1.1. Installation for XP-8000-CE6.......58
2.2.1.2. Configuration for XP-8000-CE6...60

Touch Panel Monitor User Manual, version 1.1.0, Last Revised: December 2015 Page: 4
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
2.2.1.3. Uninstalling the XP-8000-CE6.....61
2.2.1.4. Other Windows CE6.0 Devices...63
2.2.2. Serial Touch Driver..................................... 64
2.2.2.1. Installation for XP-8000-CE6.......65
2.2.2.2. Configuration for XP-8000-CE6...68
2.2.2.3. Uninstalling the XP-8000-CE6.....70
2.2.2.4. Other Windows CE 6.0 Device....72
2.3. Windows CE 7.0 ......................................................73
2.3.1. USB Touch Driver....................................... 74
2.3.1.1. Installation for WinPAC-5000-CE775
2.3.1.2. Configuration for WinPAC-5000-CE7 77
2.3.1.3. Uninstalling the WinPAC-5000-CE779
2.3.1.4. Other Windows CE7.0 Devices...80
2.3.2. Serial Touch Driver..................................... 81
2.3.2.1. Installation for WinPAC-5000-CE782
2.3.2.2. Configuration for WinPAC-5000-CE7 84
2.3.2.3. Uninstalling theWinPAC-5000-CE788
2.3.2.4. Other Windows CE7.0 Devices...89
2.4. Windows XP Embedded ..........................................90
2.4.1. Universal Driver..........................................90
2.4.1.1. Installation for XP-8000...............91
2.4.1.2. Configuration for XP-8000...........98
2.4.1.3. Uninstall for XP-8000 ................102
2.4.1.4. Other Windows XP Embedded Devices 104
2.5. Windows XP/7........................................................105
2.5.1. Universal Driver..........................................105
2.5.1.1. Installation.................................106
2.5.1.2. Configuring................................111
2.5.1.3. Uninstall ....................................113

Touch Panel Monitor User Manual, version 1.1.0, Last Revised: December 2015 Page: 5
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
Appendix A. Tips..........................................115
A.1. Don’t install USB and serial touch driver simultaneously in a device 115
A.2. Don’t plug USB cable when using serial touch driver116
Appendix B. Revision History.....................117

Touch Panel Monitor User Manual, version 1.1.0, Last Revised: December 2015 Page: 6
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
1. Introduction
This chapter provides an overview of the
TPM-4100/TP-4100/TP-2070/TP-3080/T
P-5120/TP-6150/TP-7170 and its
components.

Touch Panel Monitor User Manual, version 1.1.0, Last Revised: December 2015 Page: 7
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
The TPM-4100/TP-4100/TP-2070/TP-3080/TP-5120/TP-6150/TP-7170
Panel Mount Monitor includes a standard TFT LCD screen with a rugged
aluminum front bezel resolution and a wide operating temperature range. The
TPM-4100/TP-4100/TP-2070/TP-3080/TP-5120/TP-6150/TP-7170 is also
guaranteed to integrate with ICP DAS PAC control systems, such as
WP-8000 series, LinPAC-8000 series and the XP-8000 series.
Package List
The shipping package includes the following items:
1 TFT LCD Monitor
1 VGA cable
1 RS-232 cable
1 USB cable
4 Mounting clamps
4 Mounting Screws
1 Power supply
1 Companion CD containing software drivers and digital versions of the
user manuals

Touch Panel Monitor User Manual, version 1.1.0, Last Revised: December 2015 Page: 8
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
1.1. Features
Support resolution
Mode name
Size
Resolution
TP-2070
7”
800 x 480
TP-3080
8.4”
800 x 600
TPM-4100/TP-4100
10.4”
TP-5120
12.1”
TP-6150
15”
1024 x 768
TP-7170
17”
1280 x1024
Full-function OSD control keys for optimizing the display
Driver Support for Windows 2K/XP/Vista/7/XP-Embedded/WinCE 5.0/6.0/Linux
Wide operating temperature range
Mode name
Operating temperature
TP-2070
-20~+70 °C
TP-3080
TPM-4100/TP-4100
TP-5120
TP-6150
TP-7170
Aluminum front bezel design that is ideal for rugged applications
LED backlight technology
Supports the IP65 standard for protection against dust and water

Touch Panel Monitor User Manual, version 1.1.0, Last Revised: December 2015 Page: 9
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
1.2. Specifications
The table below is a summary of the specifications of the touch panel, and lists the
accessories that are supported by the touch panel.
Specifications
Model
TP-2070
Display
Size
7”
Resolution
800 x 480
Luminance
400 cd/m2
Touch screen
4-wire, analog resistive; Light Transmission: 80%
Contrast ratio
500:1
Viewing angle (H/V)
140/120
Backlight life (hrs)
20,000
Touchscreen function
Combo RS-232 & USB interface
Input signal
VGA (analog RGB)
MMI (Man Machine Interface)
OSD control
Functions: Brightness, Contrast, Clock, Phase, Horizontal Position, Vertical Position
and Sharpness
Power switch
Yes
LED indicators
Power, Display signal is detected
Power
Input range
+12 ~ +48 VDC
Power consumption
5 W
Mechanical
Casing
Plastic
Dimensions (W x L x H)
213 mm x 148 mm x 44 mm
Installation
Panel Mounting, VESA (75 x 75) Mounting
Ingress protection
Front panel: IP65
Environmental
Operating temperature
-20 ~ +70℃
Storage temperature
-30 ~ +80℃
Ambient relative humidity
10 ~ 90% RH (non-condensing)

Touch Panel Monitor User Manual, version 1.1.0, Last Revised: December 2015 Page: 10
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
Model
TP-3080
Display
Size
8.4”
Resolution
800 x 600
Max. Color
16.7 M
Luminance
400 cd/m2
Touch screen
5-wire, analog resistive; Light Transmission: 80%
Contrast ratio
500:1
Viewing angle (H/V)
140/130
Backlight life (hrs)
50,000
Touchscreen function
Combo RS-232 & USB interface
Input signal
VGA (analog RGB)
MMI (Man Machine Interface)
OSD control
Functions: Brightness, Contrast, Clock, Phase, Horizontal Position, Vertical Position
and Sharpness
LED indicators
Power, Display signal is detected
Power
Input range
+12 ~ +48 VDC
Power consumption
7 W
Mechanical
Casing
Plastic
Dimensions (W x L x H)
249 mm x 207 mm x 65 mm
Installation
Panel Mounting, VESA (75 mm x 75 mm; 100 mm x 100 mm) Mounting
Ingress protection
Front panel: IP65
Environmental
Operating temperature
-20 ~ +70℃
Storage temperature
-30 ~ +80℃
Ambient relative humidity
10 ~ 90% RH (non-condensing)

Touch Panel Monitor User Manual, version 1.1.0, Last Revised: December 2015 Page: 11
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
Model
TPM-4100
TP-4100
Display
Size
10.4”
Resolution
800 x 600
Max. colors
16.7 M
Luminance
400 cd/m2
Touch screen
5-wire, analog resistive
Light Transmission: 80%
5-wire, analog resistive
Light Transmission: 80%
Contrast ratio
500:1
Viewing angle (H/V)
140/130
Backlight life (hrs)
50,000
Touchscreen function
Combo RS-232 & USB interface
Input signal
VGA (analog RGB)
MMI (Man Machine Interface)
OSD control
Functions: Brightness, Contrast, Clock, Phase, Horizontal Position, Vertical Position
and Sharpness
Power switch
Yes
LED indicators
Power, Display signal is detected
Power
Input range
+12 ~ +48 VDC
Power consumption
8.5 W
Mechanical
Material
Aluminum
Plastic
Dimensions (W x L x H)
293 mm x 231 mm x 53 mm
291 mm x 229 mm x 54 mm
Installation
Panel Mounting
Panel Mounting, VESA (75 x 75) Mounting
weight
4080g
4050g
Ingress protection
Front panel: IP65
Environmental
Operating temperature
-20 ~ +70℃
Storage temperature
-30 ~ +80℃
Ambient relative humidity
10 ~ 90% RH (non-condensing)

Touch Panel Monitor User Manual, version 1.1.0, Last Revised: December 2015 Page: 12
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
Model
TP-5120
Display
Size
12.1”
Resolution
800 x 600
Max. Color
16.7 M
Luminance
400 cd/m2
Touch screen
5-wire, analog resistive; Light Transmission: 80%
Contrast ratio
500:1
Viewing angle (H/V)
140/130
Backlight life (hrs)
50,000
Touchscreen function
Combo RS-232 & USB interface
Input signal
VGA (analog RGB)
MMI (Man Machine Interface)
OSD control
Functions: Brightness, Contrast, Clock, Phase, Horizontal Position, Vertical Position
and Sharpness
LED indicators
Power, Display signal is detected
Power
Input range
+12 ~ +48 VDC
Power consumption
13 W
Mechanical
Casing
Plastic
Dimensions (W x L x H)
323 mm x 254 mm x 65 mm
Installation
Panel Mounting, VESA (75 mm x 75 mm; 100 mm x 100 mm) Mounting
Ingress protection
Front panel: IP65
Environmental
Operating temperature
-20 ~ +70℃
Storage temperature
-30 ~ +80℃
Ambient relative humidity
10 ~ 90% RH (non-condensing)

Touch Panel Monitor User Manual, version 1.1.0, Last Revised: December 2015 Page: 13
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
Model
TP-6150
Display
Size
15”
Resolution
1024 x 768
Max. colors
16.7 M
Luminance
400 cd/m2
Touch screen
5-wire, analog resistive Light Transmission: 80%
Contrast ratio
500:1
Viewing angle (H/V)
140/130
Backlight life (hrs)
50,000
Touchscreen function
Combo RS-232 & USB interface
Input signal
VGA (analog RGB)
MMI (Man Machine Interface)
OSD control
Functions: Brightness, Contrast, Phase, Horizontal Position, Vertical Position and
sharpness
LED indicators
Power, Display signal is detected
Power
Input range
+12 ~ +48 VDC
Power consumption
14.4 W
Mechanical
Material
Plastic
Dimensions (W x L x H)
381 mm x 305 mm x 65 mm
Installation
Panel Mounting, VESA (75mm x 75mm; 100mm x 100mm) Mounting
Ingress protection
Front panel: IP65
Environmental
Operating temperature
-20 ~ +70℃
Storage temperature
-30 ~ +80℃
Ambient relative humidity
10 ~ 90% RH (non-condensing)

Touch Panel Monitor User Manual, version 1.1.0, Last Revised: December 2015 Page: 14
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
Model
TP-7170
Display
Size
17”
Resolution
1280 x 1024
Max. colors
16.7 M
Luminance
350 cd/m2
Touch screen
5-wire, analog resistive Light Transmission: 80%
Contrast ratio
500:1
Viewing angle (H/V)
140/130
Backlight life (hrs)
50,000
Touchscreen function
Combo RS-232 & USB interface
Input signal
VGA (analog RGB)
MMI (Man Machine Interface)
OSD control
Functions: Brightness, Contrast, Phase, Horizontal Position, Vertical Position and
sharpness
LED indicators
Power, Display signal is detected
Power
Input range
+12 ~ +48 VDC
Power consumption
22 W
Mechanical
Material
Plastic
Dimensions (W x L x H)
413 mm x 359 mm x 70 mm
Installation
Panel Mounting, VESA (75mm x 75mm; 100mm x 100mm) Mounting
Ingress protection
Front panel: IP65
Environmental
Operating temperature
-20 ~ +70℃
Storage temperature
-30 ~ +80℃
Ambient relative humidity
10 ~ 90% RH (non-condensing)

Touch Panel Monitor User Manual, version 1.1.0, Last Revised: December 2015 Page: 15
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
1.3. Dimension
TP-2070 (Unit: mm)

Touch Panel Monitor User Manual, version 1.1.0, Last Revised: December 2015 Page: 16
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]

Touch Panel Monitor User Manual, version 1.1.0, Last Revised: December 2015 Page: 17
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
TP-3080 (Unit: mm)

Touch Panel Monitor User Manual, version 1.1.0, Last Revised: December 2015 Page: 18
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]

Touch Panel Monitor User Manual, version 1.1.0, Last Revised: December 2015 Page: 19
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
TP-5120 (Unit: mm)

Touch Panel Monitor User Manual, version 1.1.0, Last Revised: December 2015 Page: 20
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]