idesk TIKAL SLED User manual

Warning
1. Product is for single person use only.
2. Do not use this chair unless all bolts are securely tightened.
3. Check that all bolts are tightened every six months or as needed.
4. Dispose of packing material properly. Do not use plastic cover as a head covering.
Suocation may result.
5. Do not use this chair as a stepladder.
For assistance, call [phone], or www.youtube.com/user/ideskinc1
Assembly Instructions
TIKAL SLED
Plastic Shell (trac white) G00100 1A
Item Part Name Part # Qty
Sled Base G00109 1B
Bottom Cover
G00114 1C
D
Plastic Shell (trac black) G00101 1A
Plastic Shell (trac red) G00102 1A
Plastic Shell (lime green) G00103 1A
Plastic Shell (london gray) G00104 1A
Uph. Shell (cranberry red) G00105 1A
Uph. Shell (dark pewter) G00106 1A
Uph. Shell (moss) G00107 1A
A
B
C
Screw Short G00112 8
EScrew Long
G00121 8
4mm Hex Wrench
G00113 1F

1A 2A
Place sled base onto plastic shell.
Use the hex wrench to install the
screws.
Place bottom cover onto frame.
Use the hex wrench to install the
screws.
D x 4
C
B
A
B
A
D
x 4
1B 2B
Place sled base onto upholstered
shell. Use the hex wrench to install
the screws.
Place bottom cover onto frame.
Use the hex wrench to install the
screws.
E x 4
E
x 4C
B
A
B
A
DO NOT USE UPHOLSTERED
SCREWS ON PP SEAT SHELL;
IT MAY DAMAGE THE PP
SEAT SHELL
WARNING