idesk 401B AMBARELLA User manual

Assembly Instructions Slip Cover
401B AMBARELLA
2) Unzip the old slip cover and
remove
1) Remove 4 screws outermost four
corners to separate seat pan slip
cover
3) Install new slip cover. Make
sure all 4 slip cover corners
match the foam corners top
and bottom holes on bottom
of slip cover match to holes
on the seat pan
4) Re-attach the seat pan to the slip
cover using the four screws from
step 1

Assembly Instructions Slip Cover
402B/402W OROBLANCO
3) Unzip old slip cover and remove
from foam
2) Remove old slip cover and foam
from seat pan by unfastening
the velcro fasteners on the back
and front of seat. Remove the
back fasteners first
4) Install new slip cover onto
the foam
6) Align 2 front corners and
install using velcro fasteners.
Li back of seat and zip up
slip cover. Align 2 back
corners and install using
velcro fasteners
5) Make sure all four slip cover
corners match to the foam
corners, top & bottom.
Close zipper approximately 2”
1) Assemble chair
2”

Assembly Instructions Slip Cover
403B/403W OROBLANCO
2) Remove the law label and weight
capacity label and put to the side.
Unzip and the old slip cover and
remove
1) Remove seat from chair frame
using 4mm hex wrench 3) Install new slip cover. Make
sure all 4 slip cover corners
match the foam corners, top
and bottom holes on bottom
of slip cover match to holes
on the seat pan
4) Re-attach the seat pan to the slip
cover using the four screws from
step 1. Re-apply the law label and
weight capacity label. Make sure
labels are pressed down hard to
ensure attachment
WT WT
L
A
W
L
A
W