Idis DC-D4218WRA User manual

Network
Camera
Quick Guide
Powered by
DC-D4218WRA

2Quick Guide
Safety Precautions
1. Read Instructions
All the safety and operating instructions should be read before the
appliance is operated.
2. Retain Instructions
The safety and operating instructions should be retained for future
reference.
3. Cleaning
Unplug this equipment from the wall outlet before cleaning it. Do
not use liquid aerosol cleaners. Use a damp soft cloth for cleaning.
4. Attachments
Never add any attachments and/or equipment without the
approval of the manufacturer as such additions may result in the
risk of re, electric shock or other personal injury.
5. Water and/or Moisture
Do not use this equipment near water or in contact with water.
6. Placing and Accessories
Do not place this equipment on an wall or ceiling
that is not strong enough to sustain the camera. The
equipment may fall, causing serious injury to a child
or adult, and serious damage to the equipment. Wall
or shelf mounting should follow the manufacturer’s
instructions, and should use a mounting kit approved
by the manufacturer.
This equipment and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the
equipment and cart combination to overturn.
Do not place this equipment in an enclosed space. Sucient
ventilation is required to prevent an increase in ambient
temperature which can cause malfunction or the risk of re.
7. Power Sources
This equipment should be operated only from the type of power
source indicated on the marking label. If you are not sure of the
type of power, please consult your equipment dealer or local
power company.
You may want to install a UPS (Uninterruptible Power Supply)
system for safe operation in order to prevent damage caused by
an unexpected power stoppage. Any questions concerning UPS,
consult your UPS retailer.
This equipment should be remain readily operable.
8. Power Cord
Operator or installer must remove power and TNT connections
before handling the equipment.
9. Lightning
For added protection for this equipment during a lightning storm,
or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or
cable system. This will prevent damage to the equipment due to
lightning and power-line surges. If thunder or lightning is common
where the equipment is installed, use a surge protection device.
10. Overloading
Do not overload wall outlets and extension cords as this can result
in the risk of re or electric shock.
11. Objects and Liquids
Never push objects of any kind through openings of this
equipment as they may touch dangerous voltage points or short
out parts that could result in a re or electric shock. Never spill
liquid of any kind on the equipment.
12. Servicing
Do not attempt to service this equipment yourself. Refer all
servicing to qualied service personnel.
13. Damage requiring Service
Unplug this equipment from the wall outlet and refer servicing to
qualied service personnel under the following conditions:
A. When the power-supply cord or the plug has been damaged.
B. If liquid is spilled, or objects have hit the equipment.
C. If the equipment has been exposed to rain or water.
D. If the equipment does not operate normally by following
the operating instructions, adjust only those controls that
are covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualied technician to restore
the equipment to its normal operation.
E. If the equipment has been dropped, or the cabinet damaged.
F. When the equipment exhibits a distinct change in performance
— this indicates a need for service.
14. Replacement Parts
When replacement parts are required, be sure the service
technician has used replacement parts specied by the
manufacturer or that have the same characteristics as the original
part. Unauthorized substitutions may result in re, electric shock
or other hazards.
15. Safety Check
Upon completion of any service or repairs to this equipment, ask
the service technician to perform safety checks to determine that
the equipment is in proper operating condition.
16. Field Installation
This installation should be made by a qualied service person and
should conform to all local codes.
17. Tmra
A manufacturer’s maximum recommended ambient temperature
(Tmra) for the equipment must be specied so that the customer
and installer may determine a suitable maximum operating
environment for the equipment.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Important Safeguards

3Network Camera
FCC Compliance Statement
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15
OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE
EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY
ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE
TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE, IN
WHICH CASE USERS WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT THEIR OWN EXPENSE.
WARNING: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT. THIS CLASS OF DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN
INTERFERENCE CAUSING EQUIPMENT REGULATIONS.
WEEE (Waste Electrical & Electronic Equipment)
Correct Disposal of This Product
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household
wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government oce,
for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product
should not be mixed with other commercial wastes for disposal.
Safety Symbols
Symbol Publication Description
IEC60417, No.5031 Direct current
Copyright
© 2023 IDIS Co., Ltd.
IDIS Co., Ltd. reserves all rights concerning this document.
Use or duplication of this document in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited.
Contents of this document are subject to change without prior notice for reasons such as functionality enhancements.
Registered Trademarks
IDIS is a registered trademark of IDIS Co., Ltd.
Other company and product names are registered trademarks of their respective owners.
Warning: This product emits infrared light. Do not look into the IR LED.
The information in this document is believed to be accurate as of the date of publication even though explanation about some
functions may not be incorporated. The manufacturer is not responsible for any problems resulting from the use thereof. The
information contained herein is subject to change without notice. Revisions or new editions to this publication may be issued to
incorporate such changes.
The software included in this product contains some Open Sources. You may obtain the corresponding source code which we have
to distribute according to the license policy. For more information, refer to System > General page. This product includes software
developed by the University of California, Berkeley and its contributors, and software developed by the OpenSSL Project for use in the
OpenSSL Toolkit (http://www.openssl.org/). Also, this product includes cryptographic software written by Eric Young (eay@cryptsoft.
com).
Covered by one or more claims of the patents listed at patentlist.accessadvance.com.

4Quick Guide
Dome Cover Body
4
5
6
8
7
!9
0
2
1
1IR LED 7SD Memory Card Slot
2Lens 8Cable Access Hole
4Factory Reset Button 9Alarm I/O, Audio I/O
5Bottom Cover 0Wall/Ceiling
Installation Hole
6Network Port !Cable Rubber
Accessories
Upon purchasing the product, check inside the box to make sure all the following accessories are included. Some parts may dier
depending on the situation.
Item
Network Camera Guide Pattern
Quick Guide Screws and Anchors (each 2ea.)
Protect Connector Allen Wrench
Desiccants, Double-sided tapes (each 2 ea.) Safety Wire Screw
Please download software (IDIS Discovery, IDIS Center, IDIS Solution Suite Compact) and product manual from this link :
-IDIS Website (www.idisglobal.com)
-Search IDIS Discovery, IDIS Center, IDIS Solution Suite Compact.
Overview
• Product color and design may vary depending on the model.
• For more details on each part name, refer to the manual.

5Network Camera
Camera Installation
Removing the Dome Cover
1 Loosen the screws counterclockwise using the
Allen wrench provided with the product.
2 Remove the dome cover.
Inserting a SD Memory Card
Insert a SD memory card into the SD memory card slot
with the ‘microSD’printed facing upward.
micro
SD
Push the SD memory card until it disengages
from the slot, and then pull it out.
Installation
• Check the wall or ceiling to see if it needs to
be reinforced. The camera may fall o if the
wall or ceiling is not strong enough to support
its weight.
• Install the camera in a shaded area. If the
camera is installed in direct sunlight, it may be
aected adversely.
• (If necessary) Attach one end of the safety wire
(not provided) to the wall or ceiling, and the
other end of the safety wire to the installation
location on the camera body.
Safety Wire Screw (Provided)
Safety Wire (Not provided)
1 Remove the protrusion part from the cable rubber
along the dotted line.
2 Insert the LAN cable through the cable rubber
using the protect connector.
The use of lubricant is recommended to insert the
LAN cable smoothly.

6Quick Guide
3 Pull the cable slightly and arrange the rubber as
shown below.
If you insert a thin cable or more than two cables,
it is advised to nish by using silicon to make sure
to perfectly waterproof it. (Silicon nishing part
— refer to the bottom image.)
4 Assemble the cable rubber to the bottom cover.
5 Use the screws, anchor provided with the camera
to secure the bottom cover on a wall or a ceiling.
Use the provided guide pattern to check
the distance between the screw holes if
necessary.
6 Connect external devices, the network cable, and
the power adapter.
7 Adjust the angle. For more details, refer to Angle
Adjustment.
8 Attach the enclosed desiccant to the designated
space inside the dome cover using double-sided
tape as shown below.

7Network Camera
Angle Adjustment
2
3
1
1Lens Rotation 3Horizontal Rotation
2Vertical Rotation
Closing the Dome Cover
Fasten the screws for the dome cover clockwise using
the Allen wrench provided with the camera.
Remove the protective lm outside.

8
Specications
Operating Temperature -30˚C ~ 60˚C (-22˚F ~ 140˚F)
Boot Up Temperature 0˚C ~ 60˚C (32˚F ~ 140˚F)
Operating Humidity 0% ~ 90%
Power Source PoE (IEEE 802.3af, Class 3)
Power Consumption PoE (IEEE 802.3af, Class 3), 8W
Approval FCC, CE, IP67, IK10
Edge Storage* (Optional)
(micro SD/SDHC/SDXC memory card (class 6 or higher, max. 512GB))
External Dimensions (Ø x H) 120.6mm x 92.9mm (4.74” x 3.65”)
Weight (Main Unit) 0.49kg (1.08lb)
* An SLC (Single Level Cell) or MLC (Multi Level Cell) card by SanDisk or Transcend is recommended to ensure stable recording
performance.
* An SD memory card is a consumable product with a nite service life. Prolonged use will damage the card's memory sectors
and result in data loss or memory card failure. Test the SD memory card regularly and replace it whenever necessary.
* microSD Logo is a trademark of SD-3C, LLC.
V1.0

IDIS Co., Ltd.
For more information, please visit
www.idisglobal.com