IEI Technology IMBA-H310 User manual

ATX Motherboard Supports 14nm LGA1151 8th/9th Generation Intel®
Core™ i9/i7/i5/i3, Celeron®and Pentium®Processor, DDR4,
Triple Independent Displays, Dual GbE LAN, USB 3.2 Gen 1,
SATA 6Gb/s, HD Audio and RoHS
IMBA-H310
Quick Installation Guide
Version 1.0
September 16, 2020
Package List
IMBA-H310 package includes the following items:
1 x IMBA-H310 single board computer
1 x I/O shielding
2 x SATA cable
1 x QIG
©2020 Copyright by IEI Integration Corp.
All rights reserved.

1
Specifications
CPU:
LGA1151 socket supports 8th/9th generation Intel®Core™
i9/i7/i5/i3, Celeron®and Pentium®processor
System Chipset:Intel®H310
Memory:
Two 288-pin 2666/2400 MHz dual-channel DDR4 SDRAM
un-buffered DIMM slots (system max. 64 GB)
BIOS: AMI UEFI BIOS
Graphics Engine:
Intel®HD Graphics Gen 9 engine with 16 low-power execution
units supports DX2015, OpenGL 5.X and OpenCL2.x, ES 2.0
Display Output:
Triple independent display
1 x DVI-D (up to 2560x1600@60Hz)
1 x VGA (up to 1920x1200@60Hz)
1 x iDP (up to 4096x2304@60Hz)
Super IO: Fintek 81866
EC: IT8528E
Ethernet:
LAN1: Intel®I219LM PHY
LAN2: Intel®I211AT PCIe Ethernet controller
Audio:
Realtek ALC662 HD Audio codec supports 5.1-channel
(line-in, line-out, mic-in)
External I/O Interface:
4 x USB 3.2 Gen 1 (5Gb/s)
2 x USB 2.0
2 x RS-232
1 x PS/2 keyboard/mouse
Internal I/O Interface:
1 x KB/MS (1x6 pin)
1 x LPT (2x13, p=2.54mm)

2
3 x RS-232 (2x5, p=2.54mm)
1 x RS-232/422/485 (2x5, p=2.54mm）
2 x USB 2.0 (2x4, p=2.54mm)
4 x SATA 6Gb/s (no RAID)
Front Audio: 2x5-pin header
Front Panel: 1 x Front panel (2x7 pin, power LED, HDD LED,
speaker, power button, reset button)
LAN LED: 2 x LAN LED (1x2 pin)
SMBus:1 x SMBus (1x4 pin)
I²C: 1 x I²C (1x4 pin)
Expansion:
1 x PCIe x16 slot (Gen 3)
1 x PCIe x4 slot (Gen 2)
4 x PCI slots
Digital I/O: 8-bit digital I/O (4-bit input / 4-bit output)
TPM:1 x 20-pin (2x10) header
Watchdog Timer:
Software Programmable, supports 1~255 sec. System reset
Fan Connector:
1 x CPU smart fan (1x4 pin)
2 x System smart fan (1x3 pin)
Chassis intrusion: 1 x 2-pin header
Power supply: ATX/AT power supply
Power Consumption: [email protected], [email protected], 12V@3.08A,
[email protected] (Intel®Core™i5-8500 up to 3.00 GHz CPU with
20 GB 2400/2133 MHz DDR4 memory)
Operation Temperature: -20°C ~ 60°C
Storage Temperature: -30°C~70°C
Operation Humidity: 5% ~ 95%, non-condensing
Weight (GW/NW): 1200g/700g
Dimensions: 244 mm x 305 mm

3
Ordering Information
IMBA-H310-R10:
ATX motherboard supports 14nm LGA1151 8th/9th Generation Intel®
Core™ i9/i7/i5/i3, Celeron®and Pentium®processor, DDR4, triple
independent displays, dual GbE LAN, USB 3.2 Gen 1, SATA 6Gb/s,
HD Audio and RoHS
IMBA-H310-ECO-R10:
ATX motherboard supports 14nm LGA1151 8th/9th Generation Intel®
Core™ i9/i7/i5/i3, Celeron®and Pentium®processor, DDR4, triple
independent displays, dual GbE LAN, USB 3.2 Gen 1, SATA 6Gb/s,
HD Audio, ECO packaging and RoHS
19800-000075-RS:KB/MS cable with bracket, 220mm
32102-000100-200-RS: SATA power cable
19800-003100-100-RS: Dual-port USB cable with bracket, 300mm
32205-000702-100-RS: RS-232 cable, 230mm
CF1156A-RS-R11: High-performance LGA1155/1156 cooler kit, 1U
chassis compatible 73W
CF-115XC-R10: LGA1155/LGA1156 cooler kit, 1U chassis
compatible, 45W
CF-115XD-R10: LGA1155/LGA1156 cooler kit, 1U chassis
compatible, 65W
CF-115XE-R10: High-performance LGA1155/1156 cooler kit, 95W
TPM-IN02-R20: 20-pin Infineon TPM 2.0 module, software
management tool, firmware v5.5
All the drivers and utilities for the
IMBA-H310 are available on IEI
Resource Download Center. Type
IMBA-H310 and press Enter to find all the
relevant software, utilities, and
documentation. To install software from
the downloaded ISO file, mount the file
as a virtual drive to view its content.
IEI Resource Download Center
https://download.ieiworld.com

4
Jumpers Settings and Connectors
LABEL
FUNCTION
CPU12V1
+12V power connector
ATXPWR1
Additional power connector
ATX1
ATX power connector
BAT1
Battery connector
CHASSIS1
Chassis intrusion connector
CHA_DIMM0,
CHB_DIMM0
DDR4 DIMM sockets
DIO1
Digital I/O connector
CN1
EC debug connector
CPU_FAN1
Fan connector (CPU)
SYS_FAN1, SYS_FAN2
Fan connectors (system)
FRONT-PANEL1
Front panel audio connector
F_PANEL1
Front panel connector
I2C1
I2C connector
DP1
Internal DisplayPort connector
KB_MS1
Keyboard and mouse connector
LED_LAN1, LED_LAN2
LAN LED connectors
LPT1
Parallel port connector
PCI1, PCI2, PCI3, PCI4
PCI slots
PCIEX16
PCIe x16 slot
PCIEX4_1
PCIe x4 slot
PWR_SW1
Power button
COM3, COM4, COM6
RS-232 serial ports
COM5
RS-232/422/485 serial port
S_ATA1, S_ATA2,
S_ATA3, S_ATA4
SATA 6Gb/s drive connector
SMB1
SMBus connector
J_SPI1
SPI flash connector
J_EC1
SPI flash connector, EC
TPM1
TPM connector
USB1
USB 2.0 connector
AUDIO_CV1
External audio connector
LAN1_USB1,
External Ethernet and USB 3.2 Gen 1

5
LAN2_USB2
connectors
K/M_USB1
External keyboard/mouse and USB 2.0
connectors
COM1/1
External serial port connector
VIDEO1
External VGA and DVI-D connector
J_ATX_AT1: AT/ATX Mode Select Switch
PIN NO.
DESCRIPTION
Short 1 - 2
ATX Mode (default)
Short 2 - 3
AT Mode
J_CMOS1: Clear CMOS Jumper
PIN NO.
DESCRIPTION
Short (default)
Keep CMOS Setup
(Normal Operation)
Open
Clear CMOS Setup
USB SW1, USB SW2: USB Power Setting
BIOS Settings
DESCRIPTION
+5V
Power is not provided to the USB
connectors when the system is in
S3/S4 sleep state
+5VDUAL (default)
Power is provided to the USB
connectors when the system is in
S3/S4 sleep state
Aptio Setup Utility – Copyright (C) 2020 American Megatrends, Inc.
Chipset
PCH-IO Configuration
Auto Power Button Function [Disable
(ATX)]
Restore AC Power Loss [Last State]
Power Saving Function(ERP) [Disabled]
USB Power SW1 [+5VDUAL]
USB Power SW2 [+5VDUAL]
> PCI Express Configuration
> SATA Configuration
> HD Audio Configuration
-----------------
Version 2.20.1271. Copyright (C) 2020 American Megatrends, Inc.

6
J_FLASH1: Flash Descriptor Security Override
PIN NO.
DESCRIPTION
Short 1 - 2
Disabled (default)
Short 2 - 3
Enabled
CPU12V1: +12V Power Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
GND
3
+12V
4
+12V
ATXPWR1: Additional Power Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+12V
2
GND
3
GND
4
+5V
ATX1: 24-pin ATX Power Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+3.3V
13
+3.3V
2
+3.3V
14
-12V
3
GND
15
GND
4
+5V
16
PS_ON
5
GND
17
GND
6 +5V 18 GND
7
GND
19
GND
8
Power good
20
-5V
9
5VSB
21
+5V
10
+12V
22
+5V
11
+12V
23
+5V
12
+3.3V
24
GND
CHASSIS1: Chassis Intrusion Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+3.3VSB
2
CHASSIS OPEN

7
DIO1 : Digital Input / Output Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
VCC
3
Output 3
4
Output 2
5
Output 1
6
Output 0
7
Input 3
8
Input 2
9
Input 1
10
Input 0
CN1: EC Debug Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
EC_EPP_STB#
2
EC_EPP_AFD#
3
EC_EPP_PD0
4
NC
5
EC_EPP_PD1
6
EC_EPP_INIT#
7
EC_EPP_PD2
8
EC_EPP_SLIN#
9
EC_EPP_PD3
10
GND
11
EC_EPP_PD4
12
NC
13
EC_EPP_PD5
14
EC_EPP_BUSY
15
EC_EPP_PD6
16
EC_EPP_KSI5
17
EC_EPP_PD7
18
EC_EPP_KSI4
CPU_FAN1: CPU Fan Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
+12V
3
FANIO
4
PWM
SYS_FAN1, SYS_FAN2: System Fan Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
FANIO
2
+12V (PWM)
3
GND

8
FRONT-PANEL1 : Front Panel Audio Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
MIC2-L
2
GND
3
MIC2-R
4
Presence#
5
LINE2-R
6
MIC2-JD
7
FRONT-IO
8
NC
9
LINE2-L
10
LINE2-JD
F_PANEL1: Front Panel Connector
PIN
DESCRIPTION
PIN
DESCRIPTION
PWR
LED
1
PWR_LED+
2
Speaker+
SPKR
3
NC
4
N/C
5
PWR_LED-
6
N/C
PWR
BTN
7
PWR_BTN+
8
Speaker-
9
PWR_BTN-
10
NC
RESET
HDD
LED
11
HDD_LED+
12
Reset+
13
HDD_LED-
14
Reset-
I2C1: I2C Connector (to EC)
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
I2C_DAT
3
I2C_CLK
4
+5V
KB_MS1: Keyboard/Mouse Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
VCC
2
Mouse Data
3
Mouse Clock
4
Keyboard Data
5
Keyboard Clock
6
GND
LED_LAN1: LAN LED Connector
PIN
DESCRIPTION
PIN
DESCRIPTION
1
+3.3V
2
LAN1_LED_LNK#_ACT
LED_LAN2: LAN LED Connector
PIN
DESCRIPTION
PIN
DESCRIPTION
1
+3.3V
2
LAN2_LED_LNK#_ACT

9
DP1: Internal DisplayPort Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
DATA_0P
11
GND
2
GND
12
DATA_3N
3
DATA_0N
13
CONFIG1
4
DATA_1P
14
CONFIG2
5
GND
15
AUX_P
6
DATA_1N
16
GND
7
DATA_2P
17
AUX_N
8
GND
18
DP_HPD
9
DATA_2N
19
GND
10
DATA_3P
20
DP_PWR
LPT1: Parallel Port Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
RSTROBE#
2
SIO_AFD#
3
RPD0
4
SIO_ERR#
5
RPD1
6
SIO_INIT#
7
RPD2
8
SIO_SLIN#
9
RPD3
10
GND
11
RPD4
12
GND
13
RPD5
14
GND
15
RPD6
16
GND
17
RPD7
18
GND
19
SIO_ACK#
20
GND
21
SIO_BUSY
22
GND
23
SIO_PE
24
GND
25
SIO_SLCT
26
N/C