Iget HGNVK-938CAM User manual

4K PoE Bullet Spotlight Camera
Quick Start Guide - HGNVK-938CAM - EN
Add-on
Camera for NVR
8500 Series
HGNVK-938V1-230327
www.iget.cz

What’s included
Warning Sticker
4K PoE Bullet Camera
Warranty Card Mounting Screws
Ethernet Cable Quick Start Guide
Red&Blue Flashing Light
On the Homeguardsafe APP, tap Remote
Setting and go into Deterrence setting. You
can set the red and blue lights and linked
with the time schedule when the alarm is
triggered.
1
You can also turn on/off the red and blue
lights by clicking the red and blue light
icons during preview.
2

Troubleshooting
No picture / signal
•4K cameras are compatible with 4K HD NVR recorders.
•Ensure the camera is connected to a compatible NVR by ethernet cable.
•The camera may take up to 1 minute to power up after being connected to the NVR.
•There may be an issue with your extension cable run. Connect the camera to the NVR using a different Ethernet cable.
Picture is too bright
•Ensure your camera isn’t pointed directly at a source of light (e.g. sun or spot light).
•Move your camera to a different location.
•Check the brightness and contrast settings oof the NVR or monitor.
Picture is too dark
•Check the brightness and contrast settings of the NVR or monitor.
Night vision is not working
•The night vision activates when light levels drop. The area may have too much light.
Picture is not clear
•Check the camera lens for dirt, dust, spiderwebs. Clean the lens with a soft, clean cloth.
•Make sure that the cable run is within the limitations specified in the section ‘Cable Extension Options’.
Bright spot in video when viewing camera at night
•Night vision reflects when pointing a camera at a window. Move the camera to a different location.
Connecting the Camera
Mounting the Camera