Iget HOMEGUARD HGNVK-930CAM User manual

1080p HD PoE Bullet CCTV Camera
Instruction Manual - HGNVK-930CAM / EN
www.iget.eu/cs/helpdesk-centrum-cs
https://helpdesk.intelek.cz/
Add-on Camera
for iGET Homeguard
5300 Series

Be Protected &
High-accuracy Motion Alert
2
Welcome
Thank you for choosing iGET HOMEGUARD
IP66
I
N
S
T
A
L
L
E
R
'
S
C
H
O
I
C
E
P
R
E
M
I
U
M
S
U
R
V
E
I
L
L
A
N
C
E

3 4
Specifications
Item Description
1/2.7” 2.0MP
H.265/H.264
PAL: 25fps @ 1080p (1920×1080); NTSC: 30fps @ 1080p(1920×1080)
120˚
7m / 23ft
0.1LUX
PAL/NTSC
3D DNR
Dual
256Kbps ~ 8Mbps
Support
ONVIF (Ver 2.6, Profile S, Profile G)
DC 12V/PoE
≤ 7W
18 PCS
30m/100ft
IP66
Sensor
Video Compression
Image Resolution
PIR Detection Angel
PIR Detection Distance
Minimum Illumination
Signal System
Digital Noise Reduction
Stream
Video Bit Rate
Privacy Mask
System Compatibility
Power Supply
Consumption
IR LEDs
Night Vision Range
Weatherproof
What’s in the box
Warning Sticker
PoE Bullet Camera
Warranty Card Fixings
Ethernet Cable User Manual

Introduction
Each Homeguard PoE Bullet camera is supplied with a mounting kit for attaching it to a wall or ceiling. Before you affix the camera in
position, please ensure the cable is of adequate length to reach the NVR. We also recommend you try the camera with the NVR before
mounting it, to ensure it is in good working order, and help diagnose any problems created when installing it.
•Cutting edge full HD camera with 1080p video surveillance technology to deter thieves, safeguard loved ones, protect your property
& cut the cost of crime.
•Seeing is believing from this 1080p HD camera (2.0 Megapixels) with a 92° viewing angle to see high detail over a wider field of view.
•NVR’s PoE ports make setup quick & easy, with one cable installation per camera that provides both power and HD video.
•Latest infrared cut filter & powerful LEDs producing night vision up to 100ft / 30m, weatherproof IP66.
•State-of-the-art PIR motion sensor designed for security applications & optimized to reliably detect people but also cars, large pets
and other large heat-generating objects.
•With more accurate motion detection you have more reliable notifications & activity-triggered recording, eliminating false triggers
due to the wind, leaves falling, bugs, rain & more, saving you hard drive space & playback time (when combined with a NVR).
• The HGNVK-930CAM Camera is perfect addition to Homeguard's HGNVK-5300 Series HD NVR Security Systems if you need
extra surveillance.
Be Protected & High-accuracy Motion Alert:
5 6
Connecting the Camera
To connect the camera to your NVR, simply connect the supplied Ethernet cable to the LAN connection on the camera then plug the
other end of the cable into one of the camera inputs on the back of your NVR.
Note: The power connector is provided as an alternative power option if required. Your NVR will provide power over the Ethernet cable when connected and a separate
power adapter is not required.
HDMI WAN LAN8 LAN6 LAN4 LAN2
LAN7 LAN5 LAN3 LAN3
VGA
48V
CAUTION
RISKOF ELECTRIC SHOCK
DONOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK
DONOT OPEN COVERS. NO USER SERVICEABLE
PARTSINSIDE. REFER SERVICING TO QUALIFIED
SERVICEPERSONNEL.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD. DO NOT
EXPOSEUNITS NOT SPECIFICALLY DESIGNED
FOROUTDOOR USE TO RAIN OR MOISTURE.
AUDIO OUT
60ft/18.3m Ethernet Cable
PoE NVR

7 8
The camera can be mounted onto a flat surface using screws. The surface must have sufficient strength to hold the camera.
•Position the camera in the location you want to mount it, and mark the screw holes on the surface to position the screws. Then, using
appropriate screws for the surface you're fixing the camera to, secure the camera in place.
•If you're mounting to a wooden surface, then screw the camera directly to the surface.
•If you're mounting to a masonry surface (bricks, concrete or similar), then you'll need to use wall plugs.
Aiming the camera
Mounting the Camera
1. Loosen the screw (use an Allen key) to adjust the camera's orientation. This enables you to
rotate the camera so no matter what direction it is facing, your images will be the right way
up. Tighten the screw to secure in place.
2. Loosen the screw to tilt the camera up and down. Tighten the screw to secure in place.
3. To pan the camera left and right, loosen the screw and position accordingly. Tighten the
screw to secure in place.
1. What you want to monitor and where you’ll get the best view of it.
2. How you're going to connect the cameras to your monitoring system; remember that cables and connections should be kept out of
the weather.
3. How to keep the cameras out of harm's way. It's recommended to mount your cameras at an elevated position.
4. Place your cameras as close to the area of interest as practicable. The best position is from about 13ft/4m above looking slightly
down, keeping in mind the details you are looking for.
5. Think about the most likely way a potential offender may approach your home, use your cameras to give you the best coverage of
these areas.
6. Run cables inside a wall cavity or other protected enclosure, and ensure that all wiring and connectors are insulated and protected
from moisture.
7. Don’t put your cable near live electrical wiring. AC electricity generates radio “noise” which can interfere with the signal from your
cameras.
Camera Location Tips

Troubleshooting
No picture / signal
•1080p cameras are compatible with 1080p HD NVR recorders.
•Ensure the camera is connected to a compatible NVR by ethernet cable.
•The camera may take up to 1 minute to power up after being connected to the NVR.
•There may be an issue with your extension cable run. Connect the camera to the NVR using a different Ethernet cable.
Picture is too bright
•Ensure your camera isn’t pointed directly at a source of light (e.g. sun or spot light).
•Move your camera to a different location.
•Check the brightness and contrast settings oof the NVR or monitor.
Picture is too dark
•Check the brightness and contrast settings of the NVR or monitor.
Night vision is not working
•The night vision activates when light levels drop. The area may have too much light.
Picture is not clear
•Check the camera lens for dirt, dust, spiderwebs. Clean the lens with a soft, clean cloth.
•Make sure that the cable run is within the limitations specified in the section ‘Cable Extension Options’.
Bright spot in video when viewing camera at night
•Night vision reflects when pointing a camera at a window. Move the camera to a different location.
910
Warranty & Support
All the products sold are covered by 24 months warranty from the date of invoice.
Warranty instructions:
1. Please contact us when the product is caused by its own fault within 2 year warranty.
2. Please mail us your written warranty card as soon as possible after purchasing our products so that we can repair or replace this product to its
original operation condition. Or the company will not deal with it.
3. Please write the truth on the warranty card.
4. Paid for repairing as follows:
A. Equipment failure caused by human operation
B. Equipment failure caused by not conforming to the using environment
C. No warranty card
D. Warranty expired
Note: Please keep the warranty card for the better service.
For technical support, please contact us [email protected] or https://helpdesk.intelek.cz
24
Product model:
Product serial number:
Purchase date:
User name:
Contact person:
Telephone: