Iget Homeguard HGWIP812 User manual

Model: HGWIP812
HGWIP812

Quick start guide - EN


www.iget.eu/cs/helpdesk-centrum-cs
https://helpdesk.intelek.cz
iGET HOMEGUARD 2018

WHEREVER YOU ARE
GIVES YOU
PEACE OF MIND
32
Thank you for choosing HOMEGUARD.
Getting started is easy.
Welcome
HOME
Surveillance
CHILDREN
Playing/Sleeping
ELDERLY RELATIVES
Safe-guarding
PETS
Monitoring

What’s included
Camera Power Adapter
Warning Sticker Bracket
Quick Start Guide User Manual
4 5
Parts & Description
Fixings Wall Plug
Speaker
Pan / Tilt
Power Port
Mic
Sensor
Lens
Reset Button
LED Light
MicroSD
PROTECTED BY
24 HOURS VIDEO SURVEILLANCE

DC 5V
Get the App Network Connection
Step 1
For the best experience, download the Homeguardcare app for your smartphone by scanning the QR code below or searching for
“Homeguardcare” in the app store.
Connect the AC adapter to
your camera and plug it in.
Connect the camera to your router
via WiFi Configuration Guide.
6 7
Make sure you are within range of the
same Wi-Fi network you'll use for your
camera.
LED status
LED indicator shows operational status with colors. Refer to table below for detailed meaning of the LED indicator.
LED Indicator
Blinking quickly
Blinking slowly
Keep blue (Network status)
Keep red (Working status)
The indicator is off WiFi connection failed Device not operational
Network status indicator Blue colour
WiFi configuration successful Beginning upgrade
Working status indicator Red colour
Connecting to WiFi by One Key
Configuration on App
1. WPS configuration: searching for available WPS device
2. WiFi mode: connecting to WiFi signal
The device works normally
but no Internet connection
Internet connected

WiFi Configuration Guide
Step 2
3 4 5 6 7
Select "Please scan the camera’s
QR code" and scan the QR code
on the bottom of the camera
Select "Add cameras via
WiFi Configuration Guide"
Launch Homeguardcare App,
Click “Add Camera”
Name the camera and
click “Next”
Input correct WiFi password
and click “Next”
The camera will try to connect
WiFi network (the default
process is 90 seconds)
If connected, it will go back to
the Camera page and add the
device automatically
8 9
HOMEGUARD IP Camera
Part NO.: XXXXXXXX
Username: admin
Password: 123456
DID: VIEW-000117-LZVZU
DDNS: 005mryg.nwsvr1.com

Before you begin your IP Camera Set up, please:
Have your IP Camera and power adapter ready.
Have your iOS / android device available to download the Homeguardcare app.
Make sure you are within range of the same Wi-Fi network you'll use for your camera.
Run the app and add camera by scan the QR code at the bottom of the camera; Then input the user name and password.
Click "More", select "Wi-Fi Config", fill in the Wi-Fi password and click "Configuration".
You’re Done!
Congratulations! Your HOMEGUARD Camera is set up and ready to go.
You are now free to position your camera anywhere in your home where you get a WiFi signal
and view it remotely from anywhere in the world on your Smartphone or Tablet!
Please remember to change your password in the Advanced Setting-User Setting.
Record your new password here:_______________________________________.
Tips:
1. Please put your smartphone near to the router.
2. Input WiFi SSID and password, click config button, then WiFi setup is finished.
3. When WiFi indicator flash slowly (camera will be in this status after powered-on and hold for 5 minutes),
it means you can start config WiFi. After config is successful, WiFi indicator will flash fast for a while.
10 11
One Key WiFi Connection
OR YOU CAN CHOOSE

Tap the monitoring screen, the video menu action bar will appear.
Live View Monitoring Options
Cruise Vertically
Cruise Horizontally
Menu
Flip
Snapshot to phone
Contrast
Contract
Brightness
Restore to Default
Resolution VGA/1080p
Mirror
Exit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
IR LED OFF
Auto
Listen Talk
Set or Call Preset
12 13
Record video to phone
Audio On/Off
Mic On/Off
1. For 2-way Audio, ensure that the speaker is on. To Talk press & hold the Mic button until you’ve finished
talking, then release.
2. Press Menu to switch between IR LED On/Off & Set or call Preset (for Pan&Tilt camera).
1 2 3 4 5 6
7 8 9 10 11 12 13 14 15

View from Mac or Windows PC Specifications
Hardware Features
Resolution
Compression / Max Frame Rate
Image Sensor / Lens
Pan / Tilt Range
Motion Detection
Security Protocols
Wireless Speed
Camera Dimensions
Power Input
Wi-Fi Support
Power Interface
Reset Button
Built-in microSD Socket
Built-in Microphone and speaker
4 infrared LED, 8m Night Vision Range
1920 × 1080, 640 × 360
H.264/MJPEG, 30fps
1/2.7” CMOS Sensor, f=3.6mm,
F=2.0 Viewing Angle: 105°
Horizontal 300°, Vertical 60°
Supported, Will Activate Camera
WPA/WPA2, WPA-PSK/WPA2-PSK
IEEE802.11b/g/n 150Mbps
86mm × 85mm × 121mm
5V DC, <6W
Item Description
Install Homeguardcare software for your Mac or Windows PC from the included CD.
14 15