Iget SECURITY EP29 User manual

QUICK START
iGET SECURITY EP29 - EN
SOLAR SECURITY CAMERA

OVERVIEW
Microphone
Camera Lens
Motion-Activated
Spotlight
Blue Flashing
Ready for Bluetooth Pairing.
Blue Solid
Bluetooth paired, waiting for
network configuration.
Red Flashing
Errors. Please turn to our help.
Yellow Blinks
PIR triggered.
Built-In
Solar Panel
STATUS INDICATOR
2

1/4” Mounting
Thread
Speaker
Reset Button
* Refer to page15
Micro SD Card Slot
* DO NOT support
hot swap
Charging Port
Power Switch
Charge Indication
Solid: Charging
Lights out:
Fully charged or
unplugged
BACK VIEWBOTTOM VIEW
3

SECURITY AT HOME & BEYOND
Changing how the world thinks about security
inside & out!

CHARGE AND POWER ON
The camera will automatically go into Bluetooth connection
mode when powering on, with a beep and blue flash of the
indicator.
Please add it within the next 5 minutes, or it will enter battery
saving mode (You can turn off and turn on the camera again to
restart).
DOWNLOAD THE APP
Scan the QR Code on the right, or search
iGET M5 in the Apple App Store or Google
Play Store. Create an account in the App, or
login if you already have one.
1
2
QUICK SETUP
5
Please charge the camera first with the included USB-C
charging cable.

Open the iGET M5 App, click the TAP TO SCAN
button on the homepage (the regular add
portal is at the bottom of the Settings page),
and then scan the QR code on the camera with
your phone.
The App will list devices scanned by Bluetooth.
Click to connect, the camera will beep and the
indicator will switch to blue solid.
Select the Wi-Fi (2.4 GHz) network you want
connect the camera to and enter your Wi-Fi
password. After successfully configuring the
network, the camera will beep and the
indicator light will go out.
ADD THE CAMERA CONNECT TO WI-FI
43
6

2-3m is the
recommended
height when
you choose wall
mounting.
PLACE THE CAMERA
5
7
Detectable up to 8m, as
the distance increases,
the PIR detection angle
decreases.
Optimal range is 4m,
where the maximum
horizontal detection
angle is 120°.
In order to make full use of solar panel, please try to choose a place where the solar panel will receive
maximum sunlight.
To reduce frequent triggering of the PIR sensor: AVOID facing areas with strong light, temperature
changes rapidly or the air stream flows frequently; AVOID facing high-traffic areas.
Make sure the signal strength is great at the desired location.
•
•
•

1. Turn the knob of the mounting bracket counter-
clockwise to loosen and disassemble it.
2. Place the mounting bracket against the wall. Drill
holes with a 15/64 inch (6mm) drill bit, then insert the
anchors into the holes.
Wall Mounting
8
Anchors are necessary for walls that are made out
of hard materials such as concrete, brick, or stucco.

4. Hold and screw camera to the mounting bracket.
Rotate camera to adjust the view and check it using
the live stream which you can access in the iGET M5
App.
3. Firmly screw the knob of the mounting bracket
into the mounting hole of camera.
9
For better performance, please remove the
protective film from the front of the lens before
use.

Now feel free to explore the many App Features.
Setup Completed!

All of your devices
can be found under
Settings
Customize the homepage: Swipe
up and tap EDIT on the top of the
floating layer.
Shown here is the Cameras-Only
Mode. You can also use it with the
iGET M5 Smart Security System
for full protection of your home.
11
APP FUNCTIONS
Camera Settings
Start Live View
* Refer to page12

12
LIVE VIEW
Tap to take a screenshot.
Turn on/off the sound of the video.
Turn on the Spotlight.
Turn off the Spotlight.
Emit a Flashing Alarm.
Emit a Audible&Flashing Alarm.
Enable Two-way Audio.
Switch the HD/SD Display of live streams.
Switch to the Multiple Screens View.
Collapse/Expand secondary toolbars.

13
PIR Detection
It triggered by objects with a heat source such as
humans, animals, cars, even hot/cold air. With AI
detection, humans can be identified.
The camera generates 15s of video per trigger,
and can be re-triggered after a 10s cooldown.
Records & Notifications
Consecutive triggers only generate one App
push to avoid frequent disturbances.
Generate pushes
Save & Upload
Generate videos 15s 15s 15s
HOW DOES MOTION DETECTION WORK?

HOW TO EXTEND THE BATTERY LIFE?
14
Set a reasonable motion detection time:
To reduce the power consumption caused by the camera being
woken up frequently.
* Camera Settings → Motion Detection → Detection Conditions
Set the appropriate detection accuracy:
If the detection accuracy is set to HIGH, the AI recognition process
will increase power consumption.
* Camera Settings → Motion Detection → Detection Accuracy
Reduce App usage time:
The system waking up camera each time the App is launched also
increases power consumption.
According to experimental data, the camera can provide approximately 6 months of standby time with less
than 5 triggers per day.

HOW TO RESET THE CAMERA?
Open the cap at the bottom of
the device and hold the RESET
BUTTON for 5 seconds until you
hear a beep.
After resetting, all data will be
deleted and the camera will
reboot, allowing you to add it as
new.
Reset on the Camera
When the camera is OFFLINE,
tapping here will only delete it.
After deletion, the camera will
be unbundled from the family.
However the hardware is not
reset. To add it again, you need
to reset on the camera as on
the right.
Reset on the App
When the camera is ONLINE,
tap here to reset.
After resetting, all data will be
deleted and the camera will
reboot, allowing you to add it
as new.
15

Image Sensor 1/2.9"
Resolution Full HD 1920×1080
Video Bitrates 64Kbps ~ 8Mbps
Encode H.265/H.264
Focal Length 2.8mm
Max Aperture f2.2
Field of View 135°
Audio Real Two-Way audio
Audio Alert Built-in Siren, 95dB
Other Alerts Instant image/video push
notifications
Recording 15s video record when triggered
Storage Local Storage and Cloud Storage
Video Frame Rate 15fps @ 1080P PIR Detecting Angle 100°~120°
PIR Sensitivity High/Medium/Low
three gears adjustable
PIR Detecting Distance 6~8m
Full color night vision 600lm, 8M, 4000-4500K
AI Smart Detection PIR detection + Human detection
DETECTION & ALARMVIDEO & AUDIO
16
SPECIFICATIONS

WiFi Security WEP/WPA-PSK/WPA2-PSK
Operating Temperature -10 ~ 60 (-14 ~ 140 )
Weather Resistance IP66
Battery 5200 mAh rechargeable battery
Solar Charging Built-in solar charging panel,
1.3W Max
Charge time（0-100%）4.5h (5V 2A)
Power Input 5V 2A USB Type-C (Compatible
with QC/PD charging）
POWER SUPPLY
2.4 GHz
WIRELESS CONNECTION
WiFi
WiFi Standard IEEE 802.11 b/g/n
Bluetooth BLE 5.0
Weight
Dimension Camera: 140.7×107.3×68.1mm
DIMENSION & WEIGHT
Micro SD Card Supported, up to 128GB
Cloud Storage * Supported (Optional)
OPERATING ENVIRONMENT
Camera: 419.0g (Net weight)
17
STORAGE

18
SAFETY PRECAUTIONS

19
2022
EP15/EP18/EP20/EP26/EP29/EPxx
INTELEK.CZ s.r.o.
INTELEK.CZ s.r.o., Olivova 2096/4, Nové Město - Praha 1, 110 00, Czech Republic, CZ, web: http://www.iget.eu
INTELEK.CZ s.r.o.