iHealth BG5 User manual

• Press and hold the “Memory” button for 3
seconds to turn the meter on. At the same
time, turn on Bluetooth function on your
iOS device.
• In the Bluetooth menu, select the model
name “BG5xxxxxx” and “Not Paired” to
pair and connect. When the “ ”
symbol appears on the meter, the meter is
in Bluetooth communication mode.
• Each subsequent time you use the meter
“Not Connected” will be displayed next to
“BG5xxxxxx” in the Bluetooth Menu. Tap “Not
Connected” to reestablish the Bluetooth connection.
Connect the Glucose Meter to your iOS Device via
Bluetooth
MEASUREMENT INSTRUCTIONS
Step 1: Open the Bluetooth capabilities of the IOS
device
Step 2: Scan QR Code on Top of the Test Strip Vial
When you are ready to open a new test strip vial, you must
scan the QR Code on it. It is unnecessary to scan the QR
Code for each test
Step 3:Insert the test strip in the meter’s Strip Port to
turn on the meter
Step 4: Prepare the Lancing Device
DOWNLOAD THE FREE iHealth APP
Prior to first use, download and install the free App
“iHealth Gluco-Smart” from the App Store. Follow the
onscreen instructions to register and set up your personal
account.
IMPORTANT: Refer to the iHealth Wireless Smart
Gluco-Monitoring System's Owner's Manual for more
detailed instructions on how to test blood glucose levels.
PRE-SET UP INSTRUCTIONS
• iOS device is compatible and is version V5.0 or higher.
Wireless Smart Gluco-Monitoring System PACKAGE
CONTENTS
Wireless Smart Glucose Meter
Head
Main Body
Release Button
Cap (for finger testing)
Remove Lancet Part
Clear Cap (for testing sites
other than the finger)
EN
Absorbent Hole
Confirmation window
Test strip handle
Contact bars
Wireless Smart Gluco-Monitoring System (BG5)
Quick Start Guide
Control Solution
USB Charging Cable
C
o
n
t
r
o
l
S
o
l
u
t
i
o
n
Lancets

Pull off the lancet device
cap
Insert a new lancet firmly
into the lancing device cup
holder
Replace the lancing device
cap
Set a lancing level
Puncture your fingertip
Lock the handle
Twist off the lancet protective
disk
Step 5: Obtain a Blood Sample
Press the lancing device against the site to be lanced.
Press the release button to puncture your fingertip. Gently
squeeze and/or massage your fingertip until a round drop of
blood at least 0.7 micro liter forms on your fingertip.
Remove the used test strip from the
glucose meter using a small amount of
tissue paper. Discard the used test strip
and lancet properly. (Tip: Stick the lancet
in the protective disk and dispose
properly.)
Step 6: Apply the Blood Sample to the Test Strip
Apply the blood sample to the absorbent hole of the test
strip. Make sure the confirmation window of the test strip is
completely filled with the blood sample. Follow the
on-screen instructions in the App to complete the blood
glucose testing.
Step 7: Remove Test Strip from the Blood Sample
Your iOS device will beep when you should remove the test
strip from the blood sample.
Step 8: Read the Test Results
Wait for about 5 seconds, your blood glucose
result will appear on the iOS device screen.
Step 9: Discard the Used Test Strip and
Lancet
Note: For Alternative Site Testing and Control Solution
Testing, it is recommended that you read the iHealth
Wireless Smart Gluco-Monitoring System's Owner's Manual.
3