iHealth Cloud account by using your app email and password.
Go to www.ihealthlabs.com, then click on“Sign In”.
Turn Bluetooth “On”
Your iHealth Wireless Pulse Oximeter uses Bluetooth 4.0 Low Energy (BLE) technology.
Enable Bluetooth on your mobile device and launch the app to initiate the connection.
The Bluetooth icon will light up and stop ashing when a successful connection is
established. The date and time of the Pulse Oximeter will be synced with your mobile
device upon a successful connection.
TESTING INSTRUCTIONS
1. Open the clamp of the Pulse Oximeter, then place your middle, ring or index nger of
your left hand into the rubber opening of the oximeter with nail side down and display
side up, as pictured.
2. On the front panel, press the “Start” button once to turn the oximeter on.
3. Keep your hand still for the reading.
4. After a few seconds, your SpO2 reading will appear on the oximeter display screen
and the app if the app is turned on.
5. If the signal strength is too low, switch to another nger and perform the test again.
