Ihome Ibt24 User manual

•

I

instruction manual

iBT24

Portable

Rechargeable

Bluetooth

Speaker

iBT24

Introduction

Thank you for purchasing

the

iHome iBT24.

This

product

is

designed to provide high quality wireless

sound for your iPad, iPhone, iPod, computer,

PDA

or other Bluetooth audio device.

Along with the included

Quick

Bluetooth Connection

Guide

this

instruction booklet explains

the

basic

operation and care

of

the

unit. Please read

them

carefully and keep for

future

reference.

Maintenance

• Place

the

unit on a level surface

away

from

sources of direct sunlight

or

excessive heat.

• Protect your furniture when placing your unit on a natural

wood

and lacquered finish. A cloth or other

protective material should be placed between

it

and

the

furniture.

• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents,

such

as benzene, thinner or similar materials can

damage

the

surface of

the

unit.

l

Internal

Rechargeable

lithium-ion

Battery

This

device

uses

an internal rechargeable lithium-ion battery that should last the lifetime

of

the device.

If

you

suspect your battery may

be

dead, try charging it several

times

. If

the

battery does not recharge, please contact

us

for repair information.

WARNING/DISPOSAL OF UNIT

Please

do

NOT

attempt to change the battery yourself.

If

the

battery has died and you

do

not

want

us

to replace

your battery, you should follow the disposal instructions

below

:

• Never dispose

of

used

batteries/electronics with ordinary solid wastes, since they contain toxic substances.

• Always dispose

of

used batteries/electronics in accordance with the prevailing community regulations that apply

to the disposal

of

batteries/electroni

cs

.

If

there are no local regulations concerning battery/electronics disposal,

please dispose

of

the

device

in

a waste bin for electronic devices.

•

Many

electronics retailers

now

recycle batteries and other electronic components

at

no charge. Check

to

see

which ones

in

your area

do

so.

CAUTION

The

baHery

used

in

this device

may

present a risk

of

fire, explosion

or

chemical burn if

mistreated

• Never

use

or charge the battery if it appears to

be

leaking, discolored, deformed, or

in

any

way

abnormal.

• Never disassemble

the

unit or attempt to remove battery

as

that could cause leakage

of

alkaline solution

or

other

electrolytic substance.

• Always confirm that

the

temperature

is

5°C-

35°

C

141

o - 95° Fahrenheit) before you charge

the

battery.

leakage

or

deterioration

of

the

battery may occur if

this

warning

is

not heeded.

• Never expose

the

battery

to

any liquid.

• Never expose

the

battery

to

excessive heat

such

as direct sunlight or fire. Never

use

the battery pack

in

an

unventilated vehicle where excessive internal temperatures may be encountered.

• Always keep

the

battery out

of

the reach

of

infants and small children.

2

Included

iBT24

• i8T24

system

•

Micro

USB

to

USB

charging cable

• 3.5mm stereo audio cable

IBT24

System

USB

charging cable Audio cable

3

iBT24

Meet

Your

iBT24

Front

r-------

Power

/Charging/Pairing

Indicator Lignt

0

Back

B

Ill>

~

oe

Aux-in Jack

Micro

USB

Charging Port

Power

On/Off

Switch

4

0

B

~-+--------t+-

Reset

port

Aux-out Jack

Bluetooth Pairing Button

Charging

the

Unit

l .Connect

the

micro

USB

plug to

the

micro

USB

charging port

on

the

back

of

the unit.

2.

Connect

the

standard

USB

plug end of

the

cable to a power

USB

port

on

a computer or

other

USB

charging device.

For

first time

use,

charge unit for about 3 hours.

3.

A red light glows steadily while

the

unit

is

charging and

turns

OFF

once

the

unit

is

fully

charged.

If

unit

is

not powered

on

when

micro

USB

plug

is

connected, the red light

glows steadily to indicate unit

is

charging.

For

best sound performance, only operate

the

unit when fully charged.

5

Using the

iBT24

8

-4>

*

oe

©c=

CD

I

NOTE:

When

unit

is

on and not connected to

power source,

the

red light will slowly flash for a

short time (

10

times

each minute) to indicate the

battery needs charging.

Using

Bluetooth:

Pairing

Your

Device

For First Time

use

(auto pairing):

Using the

iBT24

1.

Turn

on your Bluetooth-enabled device and

turn

on Bluetooth capability

as

described

in

the

device's

user

manual.

2. Move

the

Power

ON/OFF

Switch on

the

unit to

the

ON

position (right). The first time the unit

is

turned on it

will

enter auto pairing mode, indicated

by

a

rapidly

flashing blue light. NOTE:

In

any

mode (auto link, pairing, Bluetooth

or

Aux

audio)

if

the unit

is

connected to charging source, the

indicator light

will

be red instead

of

blue."iHome iBT24" should appear

on

your device's

menu.

If

"Not

Paired",

"Not

Connected" or similar message appears, tap on "iHome iBT24" to complete

pairing.

If

your device

asks

for a password, enter

1234

on

the

keyboard

of

your device.

3. Once paired with a device,

the

blue light will

glow

steadily.

There

should

be an indication

on

your

device that pairing

is

complete (''Connected" or similar).

On

some

devices, you

must

then

select "Use

as

Audio Device" or similar

on

the

device's Bluetooth

menu.

Once paired, your device should autcrlink

to

the

iBT24 whenever within range (about

30

feet).

If

auto pairing did not work,

press

and hold

the

Bluetooth Pairing Button located

on

the

back

of

the

unit for 2 seconds to retry pairing.

Once

the Unit Has Paired with A Device (auto linking):

1. When

the

unit

has

been paired with a device,

the

next time

it

is

powered on,

the

unit will

turn

on

in

auto link mode and attempt to auto link

to

a previously paired device, indicated by a slowly flashing

blue light.

If

a linked device

is

found,

the

indicator will

glow

solid blue.

2. If no linked device

is

found,

the

blue light will continue

to

flash

slowly.

Press

and hold

the

Bluetooth

Pairing Button located on

the

back

of

the

unit for 2 seconds.

The

un

it will enter pairing mode, 2 short

beeps will sound and

the

light will

flash

blue rapidly while

the

unit attempts

to

pair.

6

Using the

iBT24

Using

Bluetooth:

Pairing

Your

Device

(cant'

d)

"iHome iBT24" should appear on your device's menu. lf

"Not

Paired",

"Not

Connected" or similar message

appears, tap on "iHome iBT24" to complete pairing. lf your device

asks

for a password, enter

1234

on

the

keyboard

of

your device.

If

no device

is

paired within 2

minutes,

the

unit will revert to auto link mode.

To

retry pairing,

press

and hold the Bluetooth Pairing Button again.

Playing

Audio

Via

Bluetooth

1.

Move

the

Power

ON/OFF

Switch to

the

ON

position (right) to

listen

to audio streamed wirelessly

from

your paired iPad, iPhone, iPod or other

Bluetooth.

device.

The

blue lightwill flash as the unit searches for a previously paired device, and

then

turn

solid blue once

a previously paired device

is

detected.

2.

Use

the

controls on your device to play or pause audio, navigate tracks and control volume from your

Bluetooth device.

3.

When

done listening, move

the

Power

ON/OFF

Switch to the

OFF

position

(left)

to

turn

the unit off.

NOTE:

Aux-in

audio

is

disabled when Bluetooth audio

is

playing from a different device.

7

Using the

iBT24

Playing Audio via Aux

In

1.

Connect

the

included 3.5

mm

audio plug to

the

headphone or line-out jack

on

your audio device and

the

other end into the

Aux-in

jack

on

the

back

of

the

unit.

2.

Move

the

Power

ON/OFF

Switch to

the

ON

position

(right}

to

listen

to

audio via aux in.

The

indicator light will

flash

blue.

3. Power

on

the

audio device and

use

the

controls

on

the

device

to

play or pause audio, navigate

tracks

and control volume.

If

your audio device

is

already paired with

the

unit

,

the

light will

glow

steadily

blue

as

in

Bluetooth mode, but you will hear your audio via aux-in.

4.

When

done listening, move

the

Power

ON/OFF

Switch to

the

OFF

position

(leh)

to

turn

the

unit off.

Remember

to

turn

offyour audio device, too.

Playing Audio via Aux

Out

You

can connect

the

unit

to

an external speaker via

the

Aux-out jack located

on

the

back

of

the

unit to

expand

the

audio playing

in

Bluetooth or

Aux-In

modes.

1. Connect a 3.5

mm

audio cable plug to

the

Aux-

out jack

on

back

of

the

unit and connect

the

other

end

to

the

line-in jack on your external speaker.

2.

Move

the

Power

ON/OFF

Switch to

the

ON

position (right}.

3. Power on a Bluetooth or aux-in audio device and

use

the

controls on

the

device

to

play or pause

audio, navigate tracks and control volume.

4.

When

done listening, move

the

Power

ON/OFF

Switch to

the

OFF

position

(left}

to

turn

the

unit off.

Remember

to

turn

off your audio device, too.

8

Unit doesn't respond

(no

power} Troubleshooting

•

Make

sure

unit

is

completely charged.

• Check that all connections are correct and properly plugged

in.

•

Make

sure

your device

is

properly paired with the iBT24.

•

Make

sure

the

Power

ON/OFF

Switch switch

is

not

in

the

OFF

{left)

position.

Resetting

the

Unit

•

If

the

unit

is

"frozen" or locks up, you may wish to

reset

it.

To

do

so,

turn

the

unit

ON

and

press

the

end

of paperclip

or

similar into

the

reset port on the back

of

the

unit for

less

than 2 seconds to

reset

it without

clearing Bluetooth settings.

The

unit will reset and power back on.

(If

pressed for longer than 2 seconds,

the

unit will reset but will not power back on.)

•

To

reset

Bluetooth settings,

turn

unit

ON

then

press

and hold

the

Bluetooth Pairing Button on the back

of

the unit for 8 seconds.

The

light will flash

red

rapidly and a tone will sound.

You

will

then

need to

re-pair any previously linked devices.

Trouble

pairing device/computer with

iBT24

Bluetooth implementation varies depending on your device's hardware and operating

system

.

Please

see

our website for updates on pairing.

•

Make

sure

you have

the

latest firmware for your device.

•

Make

sure

your device

is

working properly. Checkyour device's manual for details on Bluetooth pairing

and linking.

For further

information

and

to see the latest instructions, visit

www.ihomeaudio.com/

support

9

Consumer Product Safety Guide

IMPORTANT

SAFETY

INSTRUCTIONS

When

used

in

the

directed manner,

this

unit has been designed and manufactured to

ensure

your personal

safety.

However, improper

use

can

result

in potential electrical shock or fire hazards.

Please

read all safety

and operating instructions carefully before installation and

use,

and

keep

these

instructions handy for future

reference.

Take

special note

of

all warnings listed

in

these

instructions and on

the

unit.

1. Water and

Moisture-

The

unit

should

not

be

used

near water.

For

example: near a bathtub, washbowl,

kitchen

sink,

laundry tub, swimming pool or

in

a

wet

basement.

2.

Ventilation-

The

unit should be situated

so

that

its

location or position does not interfere with

its

proper

ventilation.

For

example, it should not be situated on a bed, sofa,

rug

or similar surface that may block

ventilation openings. Also,

it

should not be placed

in

a built-in installation,

such

as

a bookcase

or

cabinet, which may impede the flow

of

air through

the

ventilation openings.

3.

Heat-

The

unit should be situated

away

from

heat sources

such

as

radiators, heat registers,

stoves

or

other appliances (including amplifiers) that produce heat.

4.

Power

Sources-

The unit should be connected to a power supply only

of

the

type described

in

the

operating instructions or

as

marked on the appliance.

5. Power-Cable Protection -Power supply cables should

be

routed

so

that they are not likely to be

walked on or pinched

by

items

placed upon or against

them

.

It

is

always best to have a clear area

from where

the

cable exits the unit to where it

is

plugged into an

AC

socket.

6.

Cleaning-

The

unit should be cleaned only using a warm

damp

cloth. Do not

use

solvents, etc.

7. Objects

and

liquid

Entry-

Care

should be taken

so

that objects

do

not fall and liquids are not spilled

into

any

openings or

vents

located on

the

product.

8.

Attachments

-Do not

use

attachments not recommended

by

the

product manufacturer.

9.

Lightning

and

Power

Surge

Protection

-Unplug

the

unit

from

the

wall socket and disconnect

the

antenna

or

cable

system

during a lightning

storm

or when it

is

left unattended

and

unused for long

periods of time.

This

will prevent damage to the product due to lightning and power-line surges.

l

0.

Overloading- Do not overload wall sockets, extension cords, or integral convenience receptacles

as

this

can

result

in

a

risk

of

fire or electric shock.

l

l.

Damage

Requiring

Service-

The

unit should be serviced

by

qualified service personnel when:

A.

the

power supply cable or plug

has

been damaged.

B.

objects have fallen into or liquid

has

been spilled into

the

enclosure.

C.

the

unit

has

been exposed to rain.

D.

the

unit

has

been dropped

or

the

enclosure damaged.

E.

the

unit exhibits a marked change

in

performance or does not operate normally.

12.

Periods

of

Nonuse-

If the unit

is

to

be left unused for an extended period of time,

such

as

a

month

or longer,

the

power cable should be unplugged from

the

unit to prevent damage

or

corrosion.

13.

Servicing

-

The

user

should not attempt to service

the

unit beyond those methods described

in

the

user's

operating instructions. Service methods not covered

in

the operating instructions should be

referred to qualified service personnel.

Questions?

Visit

www.ihomeaudio.com

or

call

1-800288-2792

Toll

Free

FCC

Information

FCC

Radiation Exposure Statement

iBT24

FCC

ID:

EMOIBT24

IC:

986B-IBT24

This

equipment complies with FCC

RF

radiation exposure limits

set

forth for an uncontrolled environment.

This

transmitter

must

not be

co-located or operating

in

conjunction with any other antenna or

transmitter.

This Device complies with

RSS-21

0

of

the IC

Rules;

Operation

is

subject to the

following

two

conditions:

(

1)

This

device

may

not cause harmful interference

and

(2) This

device

must

accept

any

interference received, including interference that

may

cause undesired operation.

This device complies with Part

15

of

the

FCC

Rules, operation

is

subject

to

the following two conditions: (

1)

This device

may

notcause harmful interference,

and

(2)

this

device must accept

any

interference received, including interference that

may

cause undesired operation.

•

Warning:

Changes

or

modifications to this unit not expressly

approved

by

the

party

responsible for

compliance

could

void

the user's authority to operate the equipment.

•

NOTE:

This equipment has been tested

and

found

to

comply

with the limits for a Class B

digital

device, pursuant to Part

15

of

the

FCC

Rules.

These limits

are

designed

to

provide reasonable protection

against

harmful interference in a residential installation. This

equipment generates,

uses

and

can

radiate

radio

frequency

energy

and,

if not installed

and

used in

accordance

with

the

instructions,

may

cause harmful interference

to

radio

communications.

However, there

is

no

guarantee that interference

will

not

occur

in a particular installation.

If

this equipment

does

cause harmful

interference

to

radio

or

television reception,

which

can

be

determined

by

turning the equipment

off

and

on, the user

is

encouraged

to try

to

correct the interference

by

one

or

more

of

the

following

measures:

• Reorient

or

relocate the receiving antenna.

• Increase the separation between the equipment

and

receiver.

•

Connect

the equipment into

an

outlet

on

a circuit different from that to

which

the receiver

is

connected.

• Consult the

dealer

or

an

experienced

radio/TV

technician for help.

This Class B

digital

apparatus

complies with

Canadian

ICES-003.

Cet

appareil

numerique

de

Ia classe B est conforme

a

Ia norme

NMB-003

du

Canada

QDID:B020568

Limited

1

Year

Warranty

iHome Products, a division

of

SDI

Technol~ies

Inc. (hereafter referred to as

SOIL

warrants

this

product to

be

free

from

defects

in

workmanship and materials, under normal

use

and

conditions, for a period

of

one (l) year from the date

of

original purchase.

Should this product fail to function in a satisfactory manner, it

is

best to first return it to the store where it was originally purchased.

Should

this

tail to resolve the matter

and

service still

be

required

by

reason

of

ar1_y

defect

or

malfunction during the warranty

period1

SDI

will repair

or,

at

its

discretion, replace

this

product without charge.

This

decision

is

subject to verification

of

the

defect

or maltunction upon delivery

of

this

product to the Factory Service Center authorized

by

SDI

Customer Service.

The

product

must

include proof

of

purchase, including date

of

purchase. An out-of-warranty fee for service will

be

charged for

units

that are

received without proof

of

purchase.

Before returning

this

product for service, please first replace the batteries (if applicable) with

fresh

ones, as exhausted or defective

batteries are

the

most

common cause

of

problems encountered.

If

service

is

still required:

1. Call

SDI

Customer Service

at

1-80(}288-2792

for

Return

Authorization

and

for the address

of

the

Factory Service Center.

2. Remove

the

batteries (if applicable) and pack

the

unit

in

a well padded, heavy corrugated box.

SDI

is

not responsible for

damage

that occurs during shipping to the Factory Service Center.

3. Enclose a photocopy

of

your sales receipt, credit card statement1

or

other

proof

of

the

date

of

purchase,

if

within

the

warranty

period. Also include your name and address information, a briet description for

whY.

the unit

is

being returned, and the

return

authorization number.

No

unit can be processed without a

return

authorization number.

4.

Write the

return

authorization number on the side

of

the

shipping package

and

send

the

unit prepaid and insured

to

the

Factory Service Center address authorized

by

SDI

Customer Service.

Disclaimer

of

Warranty

NOTE:

This

warranty

is

valid only if the product

is

used for the purpose for which it was designed.

It

does not cover

(i)

products

which have been

dama~ed

by

negligence

or

willful actions,

misuse

or

accident,

or

which have been modified

or

repaired

by

unauthorized persons;

(ii

cracked

or

broken cabinets,

or

units

damaged

by

excessive heat; (iii)

damage

to digital media players,

CD's or tape cassettes

(i

applicable);

(iv)

the cost

of

shipping

this

prOduct

to

the Factory Service Center and

its

return

to

the

owner.

This

warranty is valid only

in

the

United States

of

America and does not extend to owners

of

the product other than to

the

original

purchaser.

In

no event will

SDI

or any

of

its

affiliates, contractors, resellers, their officers, directors,

shareholders, members or agents be liable to you

or

any third party for any consequential

or

incidental damages, any lost profits,

actual, exemplary or punitive damages. (Some

states

do

not

allow

limitations on imf?lied warranties

or

exclusion

of

consequential

damages, so

these

restrictions may not

apply

to you.)

This

warranty gives you specitic legal rights, and you may also have other

rights which vary from state to state.

Your

acknowledgement and agreement to fully and completely

abide

by

the

above mentioned disclaimer

of

warranty

is

contractually binding to you upon your transfer

of

currency (money order, cashier's check,

or

credit card) for purchase

of

your

SDI

product.

iBT24-030520

13-Ax

SDI

Questions? Visit

www

.ihomeaudio.com

or call

1-80(}288-2792

Toll

Free

Printed

in

China

iBT2.4

QUICK

BLUETOOTH

CONNECTION

GUIDE

BEFORE

YOU

START

0Biuetooth

Your

Bluetooth

device

(cellphone,

MP3

player,

computer,

etc.)

must

support

the

A2DP

Bluetooth

profile

(commonly

known

as

stereo

audio

profile)

to

work

with

the

iHome

iBT24.

Many

of

the

latest mobile

phones

and

PCs

with

built-in Bluetooth functionality will support this profile.

For

accurate

information about your product,

please

refer

to

your

Bluetooth

device's

user

manual

for

details

on

the

Bluetooth

profiles

it

supports

and

on

how

to

set

the

device's

Bluetooth

pairing/searching/setup

mode.

ABOUT

PAIRING

Pairing

is

the

term

used

when

wirelessly

connecting

two

Bluetooth

devices

for

the

first

time.

This

allows

the

devices

to

"see"

each

other

and

creates

a

unique

lasting

connection

between

the

specific

devices.

PAIRING

&

LINKING

YOUR

BLUETOOTH

DEVICE

WITH

THE

iBT24

For

First

Time

Use

(auto

pairing)

1)

Make

sure

your

Bluetooth

device

is

fully

charged.

Turn

it

on.

2)

Turn

on

Bluetooth

functionality

on

your

Bluetooth

device.

Typically,

Bluetooth

controls

are

found

on

the

device's

tools

or

settings

menu

(see

your

user

manual).

Turn

on

Bluetooth

connectivity

and

make

your

device

"discoverable".

2

3)

Move

the

Power

ON/OFF

Switch

on

the

unit

to

the

ON

position.

The first time the unit

is

turned

on

it will enter auto pairing mode, indicated by a rapidly flashing

blue light. "iHome iBT24" should appear on your device's menu. If "Not Paired",

"Not Connected" or similar message appears, tap

on

"iHome iBT24" to complete

pairing. If your device asks for a password, enter 1234

on

the keyboard of your

device.

4) Once paired with a device, the blue light will glow steadily. There should

be

an

indication

on

your device that pairing

is

complete ("Connected" or similar).

On

some devices,

you

must then select "Use as Audio Device" or similar

on

the

device's Bluetooth menu. Once paired, your device should auto-link to the iBT24

whenever within range (about

30

feet). If auto pairing did not work, press and

hold the Bluetooth Pairing Button located

on

the back ofthe unit for 2 seconds

to retry pairing.

Once the Unit Has Paired with A Device (auto linking):

1.

When the unit has been paired with a device, the next time it

is

powered

on,

the unit will turn

on

in

auto link

mode and

attempt

to

auto

link

to

a

previously

paired

device,

indicated

by

the

Power/Charging/Pairing

Indicator

Light

on

the

front

of

the

unit

slowly

flashing

blue.

If a

linked

device

is

found,

the

indicator

will

glow

solid

blue.

2)

Press

and

hold

the

Pairing

Button

for

2

seconds.

If

no

linked

device

is

found,

the

unit

will

enter

pairing

mode,

indicated

by

a2

short

beeps.The

Power/Charging/Pairing

Indicator

Light

on

the

unit

will

quickly

flash

blue

while

the

unit

attempts

to

pair.

NOTE:

If

the

unit

is

charging

the

light

will

be

red

instead

of

blue.

"iHome

iBT24"

should

appear

on

your

device's

menu.

If

"Not

Paired",

"Not

Connected"

or

similar

appears

on

your

display,

tap

on

the

"iHome

iBT24"

to

begin/complete

pairing.

If

your

device

asks

for

a

password,

enter

1234

on

the

keyboard

of

your

device.

If

no

device

is

paired

within

2

minutes,

a

tone

will

sound

and

the

unit

will

revert

to

auto

link

mode.

To

retry

pairing,

press

and

hold

the

Pairing

Button.

3)

Pairing

remains

intact

when

the

iBT24

and/or

the

Bluetooth

device

is

powered

off

or

is

taken

out

of

link

range

(about

30

feet).

The

iBT24

supports

auto-linking

and

will

automatically

re-establish

an

active

connection

when

your

Bluetooth

device

returns

within

range.

4)

The

the

iBT24

is

powered

on

it

will

automatically

try

to

re-establish

a

link

with

the

most

recently

linked

Bluetooth

device.

If

your

device

does

not

support

auto-linking

OR

was

not

the

last

linked

to

the

iBT24,

you

must

re-I

ink

manually

by

selecting

iBT24

from

the

Bluetooth

device's

menu

on

your

Bluetooth

device.

5)

When

you

power

ON

the

speaker,

it

will

automatically

link

with

the

previously

paired

Bluetooth

device

as

long

as

that

device

is

still

within

range

(about

30

feet).

So,

to

pair

with

a

different

device

you

must

enter

pairing

mode

again

(press

and

hold

the

Pairing

Button.)

3

Printed

in

China

01/22/2013-0

Simple assembly

Phone

not

included

iDS1

Portable

Stand

(for

tablets and/orsmartphones)

For

only

$4.99

we'll

send

you

a portable stand that supports most

tablets and smartphones.

Easy

setup, packs

flat

for

travel.

$4.99

includes

shipping and handling.

ORDERS

SHIPPED

TO

NJ,

TX,

WA

and

Ml

ARE

SUBJECT

TO

STATE

AND

LOCAL

SALES

TAXES

• Portable

stand

supports

tablets,

smartphones

and

other

devices

• Packs flat for easy portability

order

online:

www.ihomeaudio.com

(order

iDS

1)

order

by

phone:

toll

free

1-800-288-2792

(order

iDS1)

Offer available only

in

continental United States

Shipment:allow

up

to

30

days

Offer valid while supplies last.

Discount

on

Your

Next iHome

Purchase

FOR

1

0°/o

OFF

YOUR

PURCHASE,

VISIT

iHOMEAUDIO.COM

AND

ENTER

THIS

CODE:

iHOME1

OOFF

Discount Offer expires 12/31/14

iHome iBT24 User manual

Popular Speakers manuals by other brands