Ihse K238-5V User manual

IHSE GmbH
Maybachstrasse 11
88094 Oberteuringen
Germany
[email protected]
www.ihse.de
Tel. [phone]
Fax [phone]
User Manual
Edition: 2011-02-23
K238
Media- / DVI-Converter
Model:
K238-5V
K238-5VE
K238-5VS
K238-5FBNC

K238 Media- / DVI-Converter
2 2011-02-23
Copyright
© 2011. All rights reserved. This information may not be reproduced in any
manner without the prior written consent of the manufacturer.
Information in this document is subject to change without notice.
Trademarks
All trademark and trade names mentioned in this document are
acknowledged to be the property of their respective owners.
Disclaimer
While every precaution has been taken during preparation of this manual,
the manufacturer assumes no liability for errors or omissions. Neither does
the manufacturer assume any liability for damages resulting from the use
of the information contained herein.
The manufacturer reserves the right to change specifications, functions, or
circuitry of the product without notice.
The manufacturer cannot accept liability for damage due to misuse of the
product or due to any other circumstances outside the manufacturer’s
control (whether environmental or installation related). The manufacturer
shall not be liable for any loss, damage, or injury arising directly, indirectly,
incidentally, or consequently from the use of this product.

Contents
2011-02-23 3
Contents
1 About This Manual....................................................................... 6
1.1 Scope.................................................................................. 6
1.2 Validity ................................................................................ 6
1.3 Cautions and Notes ............................................................ 6
2 Safety Instructions.......................................................................7
3 Description ................................................................................... 8
3.1 Application .......................................................................... 8
3.2 System Overview ................................................................ 9
3.3 Product Range .................................................................. 10
3.4 Upgrade Kits ..................................................................... 10
3.5 Accessories....................................................................... 11
3.6 Device Views .................................................................... 12
3.6.1 Model K238-5V ................................................... 12
3.6.2 Model K238-5VE................................................. 13
3.6.3 Model K238-5VS................................................. 14
3.6.4 Model K238-5FBNC............................................ 15
3.7 Status LEDs ...................................................................... 16
4 Installation .................................................................................. 17
4.1 Package Contents............................................................. 17
4.2 System Setup.................................................................... 18
4.3 Example Applications........................................................ 19
5 Configuration.............................................................................. 20
5.1 Infrared Remote Control.................................................... 20
5.2 On Screen Display (OSD) ................................................. 23
5.2.1 Main Menu Item 'Color Settings' ......................... 24
5.2.2 Main Menu Item 'Picture Settings'....................... 26
5.2.3 Main Menu Item 'Input Settings' .......................... 29
5.2.4 Main Menu Item 'Output Settings' ....................... 30
5.2.5 Main Menu Item 'General Settings' ..................... 31

K238 Media- / DVI-Converter
4 2011-02-23
6 Operation .................................................................................... 35
6.1 Optimization of Picture Settings ........................................ 35
6.1.1 Optimization of Output Settings .......................... 36
6.1.2 Optimization of Input Settings ............................. 36
6.1.3 Optimization of Picture Settings .......................... 37
6.2 Download of DDC Information .......................................... 37
6.2.1 Download of DDC by Infrared Remote Control ... 38
6.2.2 Download of DDC via OSD................................. 38
7 Specifications............................................................................. 39
7.1 Interfaces .......................................................................... 39
7.1.1 DVI-D Single Link................................................ 39
7.1.2 DVI-I Single Link ................................................. 39
7.1.3 S-Video (Y/C)...................................................... 39
7.1.4 SDI Video............................................................ 39
7.1.5 EGA (D-Sub 9).................................................... 39
7.1.6 Composite Video (BAS / FBAS).......................... 40
7.1.7 Component Video (YPbPr).................................. 40
7.1.8 RGB Video.......................................................... 40
7.2 Supported Video Modes.................................................... 41
7.3 Connector Pinouts ............................................................ 49
7.4 Power Supply.................................................................... 52
7.5 Environmental Conditions ................................................. 52
7.6 Size................................................................................... 52
7.7 Shipping Weight................................................................ 53
8 Troubleshooting......................................................................... 54
8.1 Blank Screen..................................................................... 54
8.2 Picture............................................................................... 55
8.3 General ............................................................................. 55
9 Technical Support...................................................................... 56
9.1 Support Checklist.............................................................. 56
9.2 Shipping Checklist ............................................................ 56

Contents
2011-02-23 5
10 Regulatory and Standards Compliance ................................... 57
10.1 CE Declaration Of Conformity........................................... 57
10.2 North American Regulatory Compliance........................... 58
10.3 WEEE ............................................................................... 58
10.4 RoHS ................................................................................ 58
11 Glossary...................................................................................... 59
Pos: 1 /806-IHSE/ Zu diesem Handbuch/A TB_Zu diesem Handbuch @ 5\mod_1278 573163276_6.doc @ 41510 @ 1222

K238 Media- / DVI-Converter
6 2011-02-23
1 About This Manual
1.1 Scope
This manual describes how to install your Media- / DVI-Converter, how to
operate it and how to perform trouble shooting.
1.2 Validity
This manual is valid for all devices listed on the front page. The product
code is printed on the base of the devices.
1.3 Cautions and Notes
The following symbols are used in this manual:
This symbol indicates an important operating instruction that should be
followed to avoid any potential damage to hardware or property, loss of
data, or personal injury.
This symbol indicates important information to help you make the best use
of this product.
Pos: 2 /806-IHSE/ Sicherheitshinweis e/ATB_Sicherheits hinweise @ 5\mod_12785 73321245_6.doc @ 41528 @ 1

Safety Instructions
2011-02-23 7
2 Safety Instructions
To ensure reliable and safe long-term operation of your Media- / DVI-
Converter please note the following guidelines:
Installation
Only use in dry, indoor environments.
The Media- / DVI-Converter and the power supply units can get
warm. Do not situate them in an enclosed space without any airflow.
Do not place the power supply directly on top of the device.
Do not obscure ventilation holes.
Only use power supplies originally supplied with the product or
manufacturer-approved replacements. Do not use a power supply if it
appears to be defective or has a damaged case.
Connect all power supplies to grounded outlets. In each case, ensure
that the ground connection is maintained from the outlet socket
through to the power supply's AC power input.
Do not connect the link interface to any other equipment, particularly
network or telecommunications equipment.
Take any required ESD precautions.
Repair
Do not attempt to open or repair a power supply unit.
Do not attempt to open or repair the Media- / DVI-Converter. There
are no user serviceable parts inside.
Please contact your dealer or manufacturer if there is a fault.
Pos: 3 /806-IHSE/ Beschreibung/UEB_Besc hreibung @ 5\mod_1278 573379151_6.doc @ 41546 @ 1

K238 Media- / DVI-Converter
8 2011-02-23
3 Description
Pos: 4 /806-IHSE/ Beschreibung/Ver wendungszweck/238- 5v-xx @ 5\mod_1291132998828_ 6.doc @ 45123 @ 2
3.1 Application
The Media- / DVI-Converter is used to convert and output video signals of
one or more video sources (computer, CPU, camera, DVD player) in the
DVI-D format.
The Media- / DVI-Converter can be used as a switch between
concurrently available input signals.
The Media- / DVI-Converter can further be used as a scaler, scaling video
signals to a specific output format.
Pos: 5 /806-IHSE/ Beschreibung/Syst em-Übersicht /238- 5v-xx @ 5\mod_1291133036 937_6.doc @ 45141 @ 2

Description
2011-02-23 9
3.2 System Overview
The input ports of the Media- / DVI-Converter are connected to the video
source(s) (e.g. computer, CPU, camera, DVD player, SPS control), using
the provided cables or other suitable video cables.
The DVI-D monitor is connected to the output.
123
System Overview
1 Sources (DVD player, computer, camera, SPS control)
2 Media- / DVI-Converter
3 Monitor
See Chapter 4.3, Page 19 for installation examples.
Pos: 6 /806-IHSE/ Beschreibung/Gerä tetypen/238-5v- xx@ 5\m od_1291133064500_6.doc @ 45159 @ 2

K238 Media- / DVI-Converter
10 2011-02-23
3.3 Product Range
Model Description
K238-5V Media- / DVI-Converter for VGA- / DVI-Input (up
to 1920x1200)
K238-5VE Media- / DVI-Converter for VGA- / DVI-Input (up
to 1920x1200) and Video (Y/C) / Component (YPbPr) /
FBAS and CGA / EGA / MDA
K238-5VS Media- / DVI-Converter for VGA- / DVI-Input (up
to 1920x1200) and Video (Y/C) / Component (YPbPr) /
FBAS and (HD-)SDI
K238-5FBNC Media- / DVI-Converter for RGB- / VGA- / DVI-Input (up
to 1920x1200) with a separate 5x BNC RGB-Input
The input side of the following KVM extenders correspond to the Media- /
DVI-Converter K238-5V: K477-xxxxV, L474-xxxxV.
Pos: 7 /806-IHSE/ Beschreibung/Einb auoptionen/238-5 v-xx@ 5\ mod_1291133125140_6. doc @ 45177 @ 2
3.4 Upgrade Kits
Model Description
455-4G 19"/1U rack mount kit to mount up to 4 devices of type
K238-5V
455-8G 19"/1U rack mount kit to mount up to 4 devices of type
K238-5VE, -5VS or -5FBNC
455-1K Mounting plate to mount by screws
(Typ K238-5V)
455-2K Mounting plate to mount by snap on
(Typ K238-5V)
455-1G Mounting plate to mount by screws
(Typ K238-5VE, -5VS or -5FBNC)
455-2G Mounting plate to mount by snap on
(Typ K238-5VE, -5VS or -5FBNC)
Pos: 8 /806-IHSE/ Beschreibung/Zubehör /238-5v-xx @ 5\mod_129 1133182906_6.doc @ 45196 @ 2

Description
2011-02-23 11
3.5 Accessories
Model Description
238-BCA Video adapter (BNC connector to Cinch connector)
238-BNC RGB cable (2.0 m, 5x BNC connector)
238-EGA EGA cable (1.8 m, D-Sub 9 connector)
238-IR Infrared remote control
238-RCA Component video cable (1.5 m, 3x RCA connector)
238-SDI SDI cable (1.8 m, BNC connector)
238-SV S-Video cable (3.0 m, Mini-DIN connector, 4 pole)
260-5U International power supply unit 100...240VAC / 5VDC / 4 A
436-AA VGA cable (1.8 m, VGA connector to DVI-I connector)
436-DB1 RGB / DVI cable (0.2 m, 5x BNC connector to DVI-D
connector)
436-ID DVI-D cable (1.8 m, DVI-D connector)
Pos: 9 /806-IHSE/ Beschreibung/Gerä teansichten/UEB_Ger äteansichten @ 5\mod_127 8573737808_6.doc @ 41654 @ 2

K238 Media- / DVI-Converter
12 2011-02-23
3.6 Device Views
Pos: 10 /806-IHSE/ Beschreibung/Gerä teansichten/238-5 v-xx/Typ K238-5V @ 5\ mod_1291133242406_6. doc @ 45216 @ 3
3.6.1 Model K238-5V
125
34
1
Rear View Front View
1 Connect to 5VDC power
supply
2 Input: DVI-I (VGA)
3 Service port
4 IR receiver for remote control
5 Output: DVI-D
1 IR receiver for remote control
Pos: 11 /806-IHSE/ Beschreibung/Gerä teansichten/238-5 v-xx/Typ K238-5VE @ 5\mod_1 291133293343_6.doc @ 45234 @ 3
Neuedings kom mtW indows-Instal ler

Description
2011-02-23 13
3.6.2 Model K238-5VE
710
235
1
89
6
4
1
Rear View Front View
1 Connect to 5VDC power
supply
2 Input: DVI-I (VGA)
3 Service port
4 IR receiver for remote control
5 Output: DVI-D
6 Input: S-Video (Y/C)
7 Input: FBAS 1 or YPbPr (Pr)
8 Input: FBAS 2 or YPbPr (Y)
9 Input: FBAS 3 or YPbPr (Pb)
10 Input: EGA
1 IR receiver for remote control
Pos: 12 /806-IHSE/ Beschreibung/Gerä teansichten/238-5 v-xx/Typ K238-5VS @ 5\mod_1 291133309656_6.doc @ 45253 @ 3

K238 Media- / DVI-Converter
14 2011-02-23
3.6.3 Model K238-5VS
7
235
1
89 10
611
4
1
Rear View Front View
1 Connect to 5VDC power
supply
2 Input: DVI-I (VGA)
3 Service port
4 IR receiver for remote control
5 Output: DVI-D
6 Input: S-Video (Y/C)
7 Input: FBAS 1 or YPbPr (Pr)
8 Input: FBAS 2 or YPbPr (Y)
9 Input: FBAS 3 or YPbPr (Pb)
10 Input: FBAS 4
11 Input: (HD-)SDI
1 IR receiver for remote control
Pos: 13 /806-IHSE/ Beschreibung/Gerä teansichten/238-5 v-xx/Typ K238-5FBNC @ 5\m od_1291133336687_6.doc @ 45272 @ 3

Description
2011-02-23 15
3.6.4 Model K238-5FBNC
235
1
10
9
8
7
6
4
1
Rear View Front View
1 Connect to 5VDC power
supply
2 Input: DVI-I (VGA)
3 Service port
4 IR receiver for remote control
5 Output: DVI-D
6 Input: RGB (red)
7 Input: RGB (green)
8 Input: RGB (blue)
9 Input: RGB (H-/Compos. Sync)
10 Input: RGB (V-Sync)
1 IR receiver for remote control
Pos: 14 /806-IHSE/ Beschreibung/Di agnose-LEDs/238-5v- xx@ 5\ mod_1291133365796_ 6.doc @ 45291 @ 2

K238 Media- / DVI-Converter
16 2011-02-23
3.7 Status LEDs
The Media- / DVI-Converter is fitted with a multi-color LED for indication of
the connection status:
K238-5V K238-5VE / -VS / -FBNC
1
1
Front View Front View
LED 1: Connection and Video Status
LED color Description for the input Description for the output
Red No input signal Monitor detected
Dark Red Resolution not supported Monitor not detected
Green Active video signal Monitor not detected
Blue No input signal Monitor detected
Violet Resolution not supported Monitor detected
Turquoise Active video signal Monitor detected
Pos: 15 /806-IHSE/ Installation/UEB _Installation @ 5\mod_12 78574971589_6.doc @ 41768 @ 1

Installation
2011-02-23 17
4 Installation
Pos: 16 /806-IHSE/ Installation/Lief erumfang prüfen/23 8-5v-xx @ 5\mod_129113 3570562_6.doc @ 45310 @ 2
4.1 Package Contents
Your Media- / DVI-Converter package contains the following items:
Media- / DVI-Converter device
5VDC international power supply unit
Country specific power cord
Quick Setup
VGA cable (1.8 m, VGA connector to DVI-I connector)
Infrared remote control
Additional content for K238-5VE:
EGA cable (1.8 m, D-Sub 9 connector)
Component video cable (1.5 m, 3x RCA connector)
S-Video (3.0 m, Mini-DIN connector, 4 pole)
Additional content for K238-5VS:
SDI cable (2.0 m, BNC connector)
Component video cable (1.5 m, 3x RCA connector)
S-Video (3.0 m, Mini-DIN connector, 4 pole)

K238 Media- / DVI-Converter
18 2011-02-23
Additional content for K238-5FBNC:
RGB cable (2.0 m, 5x BNC connector).
If anything is missing, contact your dealer.
Pos: 17 /806-IHSE/ Installation/Sy stem anschließen/238-5 v-xx @ 5\mod_1291133656 078_6.doc @ 45329 @ 2
4.2 System Setup
First time users are recommended to setup the system with the CPU Unit
and the CON Unit in the same room as a test setup. This will allow you to
identify and solve any cabling problems, and experiment with your system
more conveniently.
Please verify that interconnect cables, interfaces and handling of the
devices comply with the requirements (see Chapter 7, Page 39).
1. Switch off all devices.
2. Connect the monitor to the Media- / DVI-Converter.
3. Connect the source (e.g. computer, video camera or control unit) to
the Media- / DVI-Converter with the provided cables. Please ensure
the cables are not strained.
4. Connect the provided 5VDC power supply to the Media- / DVI-
Converter.
5. Power up the system.
To power up the system, the following sequence is recommended:
Monitor – Media- / DVI-Converter – source.
Pos: 18 /806-IHSE/ Installation/Ins tallationsbeispi ele/UEB_Install ationsbeispiele @ 5\ mod_1278581564870_6. doc @ 42759 @ 2

Installation
2011-02-23 19
4.3 Example Applications
This section illustrates typical installations of Media- / DVI-Converters:
Pos: 19 /806-IHSE/ Installation/Ins tallationsbeispi ele/238-5v-xx @ 5\ mod_1291133686078_6.d oc @ 45348 @
123
Media- / DVI-Converter (Video Input: Composite)
1 Source (observation camera)
2 Media- / DVI-Converter
3 Monitor
123
Media- / DVI-Converter (Video Input: S-Video)
1 Source (DVD player)
2 Media- / DVI-Converter
3 Monitor
Pos: 20 /806-IHSE/ Konfiguration/ UEB_Konfiguration @ 5\ mod_1278575517073_6. doc @ 41846 @ 1

K238 Media- / DVI-Converter
20 2011-02-23
5 Configuration
Pos: 21 /806-IHSE/ Konfiguration/I nfrarot-Fernbedienu ng/238-5v-xx @ 5\mod _1291133916453_6.doc @ 45386 @ 2
5.1 Infrared Remote Control
The Media- / DVI-Converter can be configured by an on screen display
(OSD) and by an infrared remote control for the navigation through the
menu items of the OSD.
In the OSD, only the navigation keys of the infrared remote control are
functional (red function key, key <>, key <EXIT>, key <ESC> and cursor
keys <◄>, <►>, <▲>, <▼>).
Button Description
Open OSD or select menu.
Open OSD or select menu.