IKEA MATMASSIG 303.688.22 User manual

MATMÄSSIG
GB
DE

ENGLISH
Please refer to the last page of this manual for the full list of IKEA
appointed After Sales Service Provider and relative national phone
numbers.
DEUTSCH
Auf der letzten Seite dieser Broschüre finden Sie eine vollständige
Liste der offiziellen IKEA After-Sales-Dienstleister mit den
jeweiligen nationalen Telefonnummern.

ENGLISH 4
DEUTSCH 24

Contents
Safety information 4
Safety instructions 6
Installation 8
Electrical connection 9
Product description 11
Daily use 13
Hints and tips 16
Care and cleaning 16
Troubleshooting 17
Technical data 19
Energy efficiency 20
Environmental concerns 20
IKEA guarantee 21
Subject to change without notice.
Safety information
Before the installation and use of the appliance, carefully read
the supplied instructions. The manufacturer is not responsible if
an incorrect installation and use causes injuries and damage.
Always keep the instructions with the appliance for future
reference.
Children and vulnerable people safety
•This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
the use of the appliance in a safe way and understand the
hazards involved.
•Children between 3 and 8 years of age and persons with
very extensive and complex disabilities shall be kept away
from the appliance unless continuously supervised.
•Children of less than 3 years of age should be kept away
from the appliance unless continuously supervised.
•Do not let children play with the appliance.
•Keep all packaging away from children and dispose of it
appropriately.
ENGLISH 4

•Keep children and pets away from the appliance when it
operates or when it cools down. Accessible parts may
become hot during use.
•If the appliance has a child safety device, it should be
activated.
•Children shall not carry out cleaning and user maintenance of
the appliance without supervision.
General Safety
•WARNING: The appliance and its accessible parts become
hot during use. Care should be taken to avoid touching
heating elements.
•Do not operate the appliance by means of an external timer
or separate remote-control system.
•WARNING: Unattended cooking on a hob with fat or oil can
be dangerous and may result in fire.
•NEVER try to extinguish a fire with water, but switch off the
appliance and then cover flame e.g. with a lid or a fire
blanket.
•CAUTION: The cooking process has to be supervised. A short
term cooking process has to be supervised continuously.
•WARNING: Danger of fire: Do not store items on the cooking
surfaces.
•Metallic objects such as knives, forks, spoons and lids should
not be placed on the hob surface since they can get hot.
•Do not use the appliance before installing it in the built-in
structure.
•Do not use a steam cleaner to clean the appliance.
•After use, switch off the hob element by its control and do not
rely on the pan detector.
•If the glass ceramic surface / glass surface is cracked, switch
off the appliance and unplug it from the mains. In case the
appliance is connected to the mains directly using junction
ENGLISH 5

box, remove the fuse to disconnect the appliance from power
supply. In either case contact the Authorised Service Centre.
•If the supply cord is damaged, it must be replaced by the
manufacturer, the Authorised Service Centre or similarly
qualified persons in order to avoid a hazard.
•WARNING: Use only hob guards designed by the
manufacturer of the cooking appliance or indicated by the
manufacturer of the appliance in the instructions for use as
suitable or hob guards incorporated in the appliance. The
use of inappropriate guards can cause accidents.
Safety instructions
Installation
Warning! The appliance must be
installed by the authorised
installer.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Follow the installation instructions
supplied with the appliance.
• Keep the minimum distance from other
appliances and units.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.
• Protect the bottom of the appliance from
steam and moisture.
• Do not install the appliance adjacent to
a door or under a window. This prevents
hot cookware falling from the appliance
when the door or the window is opened.
• If the appliance is installed above
drawers make sure that the space,
between the bottom of the appliance
and the upper drawer, is sufficient for air
circulation.
• The bottom of the appliance can get hot.
Make sure to install a non-combustible
separation panel under the appliance to
prevent access to the bottom.
Refer to the Assembly Instructions.
• Make sure that the ventilation space of 2
mm, between the worktop and the front
of the below unit, is free. The warranty
does not cover damages caused by the
lack of an adequate ventilation space.
Electrical Connection
Warning! Risk of fire and electric
shock.
• All electrical connections should be made
by the authorised installer.
• The appliance must be earthed.
• Before carrying out any operation make
sure that the appliance is disconnected
from the power supply.
• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
• Make sure the appliance is installed
correctly. Loose and incorrect electricity
mains cable or plug (if applicable) can
make the terminal become too hot.
• Use the correct electricity mains cable.
• Do not let the electricity mains cable
tangle.
ENGLISH 6

• Make sure that a shock protection is
installed.
• Use the strain relief clamp on the cable.
• Make sure the mains cable or plug (if
applicable) does not touch the hot
appliance or hot cookware, when you
connect the appliance to the near
sockets.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to the
mains plug (if applicable) or to the mains
cable. Contact our Authorised Service
Centre or an electrician to change a
damaged mains cable.
• The shock protection of live and
insulated parts must be fastened in such
a way that it cannot be removed without
tools.
• Connect the mains plug to the mains
socket only at the end of the installation.
Make sure that there is access to the
mains plug after the installation.
• If the mains socket is loose, do not
connect the mains plug.
• Do not pull the mains cable to disconnect
the appliance. Always pull the mains
plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have an
isolation device which lets you disconnect
the appliance from the mains at all poles.
The isolation device must have a contact
opening width of minimum 3 mm.
Use
Warning! Risk of injury, burns
and electric shock.
• Remove all the packaging, labelling and
protective film (if applicable) before first
use.
• This appliance is for household use only.
• Do not change the specification of this
appliance.
• Make sure that the ventilation openings
are not blocked.
• Do not let the appliance stay unattended
during operation.
• Set the cooking zone to “off” after each
use.
• Do not rely on the pan detector.
• Do not put cutlery or saucepan lids on
the cooking zones. They can become hot.
• Do not operate the appliance with wet
hands or when it has contact with water.
• Do not use the appliance as a work
surface or as a storage surface.
• If the surface of the appliance is cracked,
disconnect immediately the appliance
from the power supply. This to prevent
an electrical shock.
• Users with a pacemaker must keep a
distance of minimum 30 cm from the
induction cooking zones when the
appliance is in operation.
• When you place food into hot oil, it may
splash.
Warning! Risk of fire and
explosion
• Fats and oil when heated can release
flammable vapours. Keep flames or
heated objects away from fats and oils
when you cook with them.
• The vapours that very hot oil releases
can cause spontaneous combustion.
• Used oil, that can contain food remnants,
can cause fire at a lower temperature
than oil used for the first time.
• Do not put flammable products or items
that are wet with flammable products in,
near or on the appliance.
Warning! Risk of damage to the
appliance.
• Do not keep hot cookware on the control
panel.
• Do not put a hot pan cover on the glass
surface of the hob.
• Do not let cookware boil dry.
ENGLISH 7

• Be careful not to let objects or cookware
fall on the appliance. The surface can be
damaged.
• Do not activate the cooking zones with
empty cookware or without cookware.
• Do not put aluminium foil on the
appliance.
• Cookware made of cast iron, aluminium
or with a damaged bottom can cause
scratches on the glass / glass ceramic.
Always lift these objects up when you
have to move them on the cooking
surface.
• This appliance is for cooking purposes
only. It must not be used for other
purposes, for example room heating.
Care and cleaning
• Clean the appliance regularly to prevent
the deterioration of the surface material.
• Deactivate the appliance and let it cool
down before you clean it.
• Disconnect the appliance from the
electrical supply before maintenance.
• Do not use water spray and steam to
clean the appliance.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use any abrasive products, abrasive
cleaning pads, solvents or metal objects.
Service
• To repair the appliance contact the
Authorised Service Centre.
• Use original spare parts only.
Disposal
Warning! Risk of injury or
suffocation.
• Contact your municipal authority for
information on how to discard the
appliance correctly.
• Disconnect the appliance from the mains
supply.
• Cut off the mains electrical cable close to
the appliance and dispose of it.
Installation
Warning! Refer to Safety
chapters.
General information
Installation process must follow
the laws, ordinances, directives
and standards (electrical safety
rules and regulations, proper
recycling in accordance with the
regulations, etc.) in force in the
country of use!
ENGLISH 8

min.
38 mm
min. 5 mm
max.
R 5 mm
490±1
mm
560±1
mm
520 mm
590 mm
min.
55 mm
min.
500 mm
min.
38 mm
5 mm
min. 50 mm
Important!
• For further information on the installation
refer to the Assembly Instruction.
• If there is no oven beneath the hob insert
a dividing panel at a minimum distance
of 20 mm from the bottom of the hob.
• Do not use silicon sealant between the
appliance and the worktop.
Electrical connection
Warning! Refer to Safety
chapters.
Warning! All electrical
connections must be made by an
authorised installer.
Electrical connection
• Before connecting, check if the nominal
voltage of the appliance, provided on
the rating plate, corresponds to the
available supply voltage. The rating
plate is located on the lower casing of
the hob.
• Follow the connection diagram (it is
located on the underneath surface of the
casing of the hob).
• Use only original spare parts provided
by spare parts service.
• The appliance is not provided with a
mains cable. Buy the right one from a
specialized dealer. Single phase or two-
phase connection requires a mains cable
of minimum 70°C temperature stability.
Cable needs mandatory end sleeves.
According to IEC regulations use for one-
phase connection: mains cable 3 x 4mm²
and for two-phase connection: mains
cable 4 x 2.5mm². Please respect specific
national regulations in the first priority.
• You must have the means for
disconnection incorporated in the fixed
wiring.
• You must have the connection and the
connecting links carried out as shown in
the connection diagram.
• The earth lead is connected to terminal
and must be longer than leads carrying
electric current.
ENGLISH 9

• Secure the connecting cable with cable
clips or clamps.
Connection diagram hob
One-phase connection 220 V - 240 V ~ Two-phase connection 400 V 2L-1N ~
1
2
3
N
L
N
PE
Insert the bridge between the
screws as shown.
1
2
3
N
L1
L2
N
PE
Main power connection 1-phase Main power connection 2-phase
L N
L1 L2 L3 N
Wiring colours: Wiring colours:
Yellow / green Yellow / green
N Blue N Blue
L Black or brown L1 Black
L2 Brown
Tighten the terminal screws
securely!
Once you connect the hob to the mains,
check if all the cooking zones are ready to
use. Place a pot with some water on the
zone and set the power setting for each
zone to the maximum level for a short time.
If or symbol comes on
the display after you activate the
hob for the first time, see the
"Troubleshooting" chapter.
ENGLISH 10

Product description
Cooking surface layout
210 mm
145 mm
180 mm 180 mm
12
4 35
1Single cooking zone (180 mm) 1800 W
2Single cooking zone (180 mm) 1800 W,
with Booster 2500 W
3Single cooking zone (145 mm) 1400 W
4Control panel
5Single cooking zone (210 mm) 2200 W,
with Booster 3200 W
Control panel layout
43 6
7
1 2
89
5
1 To activate and deactivate the
appliance.
2 To activate and deactivate the Lock
or the Child Safety Device.
ENGLISH 11

3 To activate the Booster (Display
shows a ).
4A power setting display: , - .
5Timer indicators of cooking zones.
6Timer display: 00 - 99 minutes.
7 / To increase or decrease the
time.
8 / To increase or decrease the
power settings.
9 To activate the function STOP+GO.
Power setting displays
Display Description
The cooking zone is deactivated.
- The cooking zone operates.
STOP+GO function operates.
Booster function operates.
+ digit There is a malfunction. Refer to the "Troubleshooting" chapter.
A cooking zone is still hot (residual heat).
Lock / Child Safety Device function operates.
Incorrect or too small cookware or no cookware on the cooking zone.
Automatic Switch Off function operates.
Residual heat indicator
Warning! There is a risk of
burns from residual heat. The
indicators show the level of the
residual heat for the cooking
zones you are currently using.
The indicators may also come on
for the neighbouring cooking
zones even if you are not using
them.
The induction cooking zones produce the
heat necessary for the cooking process
directly in the bottom of the cookware. The
glass ceramic is heated by the heat of the
cookware.
ENGLISH 12

Daily use
Activating and deactivating
Touch for 1 second to activate or
deactivate the appliance.
Automatic Switch Off
The function deactivates the appliance
automatically if:
• all cooking zones are deactivated.
• you do not set the power setting after
activating the appliance.
• you cover any symbol with an object (a
pan, a cloth, etc.) for longer than approx.
10 seconds.
• you do not deactivate a cooking zone
after a certain time, or you do not modify
the power setting, or if the overheating
occurs (e.g. when a pan boils dry). The
symbol lights up. Before using again,
you must set the cooking zone to .
Power setting Automatic switch off
after
, - 6 hours
- 5 hours
4 hours
- 1.5 hours
If cookware that is not suitable is
used, lights up on the display
and after 2 minutes the indicator
for the cooking zone deactivates
itself.
Adjusting the power setting
Set the power setting with to increase.
Set the power setting with to decrease.
Touch and of a respective cooking
zone simultaneously to deactivate the
cooking zone. The settings will reverse to
.
Using the Booster function
The Booster function makes additional
power available for the induction cooking
zones. Touch to activate it, a lights up
on the display. After maximum 10 minutes,
the induction cooking zones automatically
return to cooking level .
ENGLISH 13

Using the Timer
Touch repeatedly until the indicator of a
desired cooking zone flashes. For example,
for the front right zone .
Touch or of the Timer to set the time
between 00 and 99 minutes. When the
indicator of the cooking zone flashes slower,
the Timer counts down. Set the power
setting.
When the power setting is set and the time
comes to an end, an acoustic signal sounds,
00 flashes, and the cooking zone
deactivates.
Touch to deactivate the function for the
selected cooking zone. The indicator of the
cooking zone flashes faster. Touch and
the remaining time counts backwards to 00.
The indicator of the cooking zone goes out.
Minute Minder
You can use this function as a Minute
Minder when the appliance works and the
cooking zones do not operate. The power
setting display shows 0.
To activate the function, touch . Touch
or to set the time.
When the time comes to an end, an acoustic
signal sounds and 00 flashes. Touch to
stop the signal.
The function has no effect on the
operation of the cooking zones.
STOP+GO
The function sets all cooking zones that
operate to the lowest power setting .
When the function operates, you cannot
change the power setting. The function does
not stop the Timer function.
• To activate this function touch . The
symbol comes on.
• To deactivate this function touch . The
power setting that you set before comes
on.
Lock
When the cooking zones operate, you can
lock the control panel, but not deactivate
the appliance. It prevents an accidental
change of the power setting.
First set the power setting.
To start this function touch . The symbol
comes on for 4 seconds. The Timer stays
on.
To stop this function touch . The power
setting that you set before comes on.
When you stop the appliance, you also stop
this function.
The Child Safety Device
This function prevents an accidental
operation of the appliance.
To activate the Child Safety Device
• Activate the appliance with . Do not
set the power settings.
• Touch for 4 seconds. The symbol
comes on.
• Deactivate the appliance with .
To deactivate the Child Safety Device
ENGLISH 14

• Activate the appliance with . Do not
set the power settings. Touch for 4
seconds. The symbol comes on.
• Deactivate the appliance with .
To override the Child Safety Device for
only one cooking time
• Activate the appliance with . The
symbol comes on.
• Touch for 4 seconds. Set the power
setting in 10 seconds. You can operate
the appliance.
• When you deactivate the appliance with
, the Child Safety Device operates
again.
OffSound Control (Deactivation and
activation of the sounds)
Originally the sounds of the appliance are
activated.
Activating and deactivating the sounds:
1. Deactivate the appliance.
2. Touch for 3 seconds. The display
comes on and goes out.
3. Touch for 3 seconds. or comes
on.
4. Touch of the Timer to choose one of
the following:
• - the sound is off.
• - the sound is on.
To confirm your selection wait until the
appliance deactivates automatically.
If you accidentally press , a list
of codes comes on. This is only
relevant for service purposes. To
leave this menu touch again
or wait until the hob deactivates
automatically.
When the function is set to you can hear
the sound only when:
• you touch ,
• Minute Minder comes down,
• you put something on the control panel.
If there is a problem with
electrical supply and the
appliance deactivates it does not
keep previous settings.
Power exchange function
The power exchange function shares the
maximum available power between two
cooking zones generating a pair (see
picture). Booster function can cause that the
maximum available power for a pair is
exceeded. Then the second cooking zone is
automatically reduced to a lower power
level. The power setting display of the
reduced zone changes between the
selected and the maximum available power
levels for about 5 seconds. When you hear
a signal, the display shows the maximum
available power.
ENGLISH 15

Hints and tips
Noises during operation
When a cooking zone is active, it
may hum briefly. This is a
characteristic of all ceramic glass
cooking zones and does not
impair either the function or the
life of the appliance.
Cookware for induction cooking zones
Use the induction cooking zones
with correct cookware.
Cookware material
•correct: cast iron, steel, enamelled steel,
stainless steel, the bottom made of multi-
layer (with correct mark from a
manufacturer).
•not correct: aluminium, copper, brass,
glass, ceramic, porcelain.
Cookware is correct for an induction hob
if …
• ... some water boils very quickly on a
zone set to the highest power setting...
• ... a magnet pulls on to the bottom of the
cookware.
The bottom of the cookware must
be as thick and flat as possible.
Cookware sizes
Induction cooking zones adapt
automatically to the size of the bottom of
the cookware. But, it must have a minimum
diameter depending on the size of the
cooking zone.
Cooking zone Cookware diame-
ter [mm]
Right rear cooking
zone
145 - 180
Right front cooking
zone
125 - 145
Left rear cooking
zone
145 - 180
Left front cooking
zone
180 - 210
Care and cleaning
General information
Warning! Deactivate the
appliance and let it cool down
before you clean it.
Warning! For safety reasons, do
not clean the appliance with
steam blasters or high-pressure
cleaners.
Warning! Sharp objects and
abrasive cleaning agents will
damage the appliance. Clean
the appliance and remove the
residues with water and washing
up liquid after each use. Remove
also the remnants of the cleaning
agents!
Scratches or dark stains on the
glass ceramic that cannot be
removed do not affect the
functioning of the appliance.
ENGLISH 16

Removing the residues and stubborn
residues
1. Food containing sugar, plastics, tin foil
residues should be removed at once,
best tool for cleaning glass surface is a
scraper (not included with the
appliance). Place a scraper on the glass
ceramic surface at an angle and remove
residues by sliding the blade over the
surface. Wipe the appliance with a
damp cloth and a little washing up
liquid. Finally, rub the appliance dry
using a clean cloth.
2. Limescale rings, water rings, fat
splashes, shiny metallic discolorations
should be removed after the appliance
has cooled down using cleaner for glass
ceramic or stainless steel.
Troubleshooting
Warning! Refer to Safety
chapters.
What to do if…
Problem Possible cause Remedy
The appliance cannot be ac-
tivated or is not operating.
The appliance is not connec-
ted to an electrical supply or
it is connected incorrectly.
Check if the appliance is cor-
rectly connected to the elec-
trical supply. Ensure a cor-
rect installation by calling an
authorised installer.
More than 10 seconds
passed since you activated
the appliance.
Activate the appliance
again.
The Child Safety Device or
the Lock is on .
Deactivate the Child Safety
Device (See the section
“Child Safety Device" or
"Lock").
Several symbols were
touched at the same time.
Touch only one symbol.
Acoustic signal sounds, ap-
pliance deactivates.
One or more symbols have
been covered for longer
than 10 seconds.
Uncover symbols.
Display is switching between
two power settings.
Power exchange function is
reducing the power of this
cooking zone.
See the section "Power ex-
change function".
ENGLISH 17

Problem Possible cause Remedy
The residual heat indicator is
not displaying anything.
The cooking zone was only
on for a short time and is
therefore not hot.
If the cooking zone is sup-
posed to be hot, call the Af-
ter Sales Service.
There is no signal when you
touch panel symbols.
The signals are deactivated. Activate the signals. Refer to
OffSound Control.
lights up on the power
setting display.
Unsuitable cookware. Use suitable cookware.
No cookware on the cooking
zone.
Place cookware on the cook-
ing zone.
The diameter of the bottom
of the cookware is too small
for the cooking zone.
Move onto a smaller cooking
zone.
symbol plus a number
appears on the timer dis-
play.
Electronic component error. Disconnect the appliance
from the electrical supply for
a few minutes. Remove the
fuse, wait one minute, and
insert the fuse again. If the
problem continues, ensure a
correct installation by calling
an authorised installer.
lights up on the timer
display, after activating the
appliance.
The electrical connection is
incorrect.
Check if the appliance is cor-
rectly connected to the elec-
trical supply. Ensure a cor-
rect installation by calling an
authorised installer.
lights up on the timer
display.
Overheating protection for
the cooking zone operates.
Deactivate the appliance.
Remove the hot cookware.
After approximately 30 sec-
onds activate the cooking
zone again. should dis-
appear, residual heat indi-
cator can stay. Cool down
the cookware and check it
with the section "Cookware
for the induction cooking
zones".
ENGLISH 18

Problem Possible cause Remedy
lights up on the timer
display.
The electrical connection is
incorrect. The hob is connec-
ted to one phase only.
Check if the appliance is cor-
rectly connected to the elec-
trical supply. Ensure a cor-
rect installation by calling an
authorised installer.
Electronics may be dam-
aged.
Contact your IKEA store call
centre.
You can hear a constant
beep noise.
The electrical connection is
incorrect.
Disconnect the hob from the
electrical supply. Ensure a
correct installation by calling
an authorised installer.
If there is an error, first try to find a solution
to the problem yourself. If you cannot find a
solution to the problem yourself, contact
your IKEA store call centre. You can find a
full list of IKEA appointed contacts at the
end of this manual.
If you operated the appliance
wrongly, or the installation was
not carried out by a registered
engineer, the visit from the After
Sales Service technician or
dealer may not take place free
of charge, even during the
warranty period.
Technical data
Rating Plate
IKEA of Sweden AB
SE - 343 81 Älmhult
21552 DGT
230 V
303.688.22
Made in Germany
© Inter IKEA Systems B.V.
Model MATMÄSSIG Typ 60 GAD D5 AU 7,4kW
PNC 949 594 429 00 S NO ............... 220V-240V AC 50-60 Hz
The graphic above represents the rating
plate of the appliance (without serial
number which is specific for each product),
which is located at its underneath surface of
the casing.
Dear Customer, keep the additional rating
plate with the user manual. This will allow us
to assist you better, by identifying precisely
your hob, in case you will need in future our
assistance. Thank you for your help!
ENGLISH 19

Energy efficiency
Product information according to EU 66/2014 valid for EU market only
Model identification MATMÄSSIG
303.688.22
Type of hob Built-In Hob
Number of cooking zones 4
Heating technology Induction
Diameter of circular cook-
ing zones (Ø)
Left front
Left rear
Right front
Right rear
21.0 cm
18.0 cm
14.5 cm
18.0 cm
Energy consumption per
cooking zone (EC electric
cooking)
Left front
Left rear
Right front
Right rear
190.2 Wh / kg
184.4 Wh / kg
188.2 Wh / kg
184.4 Wh / kg
Energy consumption of the
hob (EC electric hob)
186.8 Wh / kg
EN 60350-2 - Household electric cooking
appliances - Part 2: Hobs - Methods for
measuring performance
Energy saving
You can save energy during everyday
cooking if you follow below hints.
• When you heat up water, use only the
amount you need.
• If it is possible, always put the lids on the
cookware.
• Before you activate the cooking zone put
the cookware on it.
• Put the smaller cookware on the smaller
cooking zones.
• Put the cookware directly in the centre of
the cooking zone.
• Use the residual heat to keep the food
warm or to melt it.
Environmental concerns
Recycle materials with the symbol . Put
the packaging in relevant containers to
recycle it. Help protect the environment and
human health by recycling waste of
electrical and electronic appliances. Do not
dispose of appliances marked with the
symbol with the household waste. Return
the product to your local recycling facility or
contact your municipal office.
ENGLISH 20