Ikegami SDR-104 User manual

Standalone Digital Video Recorder
Real time DVR
4, 8, 16 Channel Models
User`s Manual
KQ3 - v2.10_5070 This document contains preliminary information and is subject to change without notice.

2
FCC Compliance Statement
Notice to Users:This equipment has been tested and found to comply with the limits for a Class A digital device. Pursuant to Part
15 of the FCC Rules, these limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at own expense.
CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
The equipment complies with the requirement of FCC CFR 47 PART 15 SUBPART B, Class A.
Explanation of Graphical Symbols
Warnings
Installation and servicing should be performed only by qualified and experienced personnel.
Power off the DVR when connecting cameras, audio, or sensor cables.
The manufacturer is not responsible for any damage caused by improper use of the product or failure to follow instructions for
the product.
The manufacturer is not responsible for any problems caused by or resulting from the user physically opening the DVR for
examination or attempting to fix the unit.
The manufacturer may not be held liable for any issues with the unit if any labels are removed in the product.
This symbol indicates the presence of important operating and maintenance (servicing)
instruction in the literature accompanying the product.
This symbol indicates the presence of non-insulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.

3
Cautions
This product has multiple-rated voltages (110V and 220V). See installation instructions before connecting to the power supply.
This product uses a Lithium battery.
To avoid any risk of explosion, do not replace the battery on the main board by anything other than a Lithium battery.
Dispose of used batteries according to the manufacturer’s instructions.
This equipment and all communication wirings are intended for indoor use only.
To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.
WEEE(Waste Electrical and Electronic Equipment)
Important Safeguards
1. Read Instructions
To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.
2. Retain Instructions
The safety and operating instructions should be retained for future reference.
3. Cleaning
Unplug this equipment from the wall outlet before cleaning it. Do not use liquid aerosol cleaners. Use a damp soft cloth for
cleaning.
4. Attachments
Never add any attachments and/or equipment without manufacturer approval as such additions may result in the risk of fire,
electric shock, or other personal injury.
5. Water and/or Moisture
Do not use this equipment near water or in contact with water.
6. Accessories
Do not place this equipment on an unstable cart, stand or table. The equipment may fall, causing serious injury to a child or
adult and serious damage to the equipment.
Wall or shelf mounting should follow the manufacturer’s instructions and should use a mounting kit approved by the
manufacturer.
Move this equipment and cart combination with care. Quick stops, excessive force and uneven surfaces may cause the
equipment and cart combination to overturn.
7. Power Sources
This equipment should be operated only from the type of power source indicated on the marking label. If not sure the type of
power, please consult to distributor or local power company.
8. Power Cords
Operator or installer must remove power, BNC, alarm and other connections before moving the equipment.
9. Lightning
For added protection for this equipment during a lightning storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the equipment
due to lightning and power-line surges.
10. Overloading
Do not overload wall outlets and extension cords to avoid the risk of fire or electric shock.
Customers in European Union countries are advised to dispose this product, at the end of its
useful life, as per applicable local laws, regulations and procedures.

4
11. Objects and Liquids
Never push objects of any kind through openings of this equipment as they may touch dangerous voltage points or short out
parts that could result in a fire or electric shock.
Never spill liquid of any kind on the equipment.
12. Servicing
Do not attempt to service this equipment yourself. Refer all servicing to qualified service personnel.
13. Damage Requiring Service
Unplug this equipment from the wall outlet and refer servicing to qualified service personnel under the following conditions:
① When the power-supply cord or the plug has been damaged.
② If liquid is spilled or objects have fallen into the equipment.
③ If the equipment has been exposed to rain or water.
④ If the equipment does not operate normally by following the operating instructions, adjust only those controls that are
covered by the operating instructions as an improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the equipment to its normal operation.
⑤ If the equipment has been dropped or damaged the cabinet.
⑥ When the equipment exhibits a distinct change in performance—this indicates a need for service.
14. Replacement Parts
When replacement parts are required, ensure the service technician uses replacement parts specified by the manufacturer
or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or
other hazards.
15. Safety Check
Upon completion of any service or repairs to this equipment, ask the service technician to perform safety checks to
determine that the equipment is in proper operating condition.
16. Field Installation
This installation should be made by a qualified service person and should conform to all local codes.
17. Correct Batteries
CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
18. Operating Temperature
An operating temperature range is specified so that the customer and installer may determine a suitable operating
environment for the equipment.
19. Elevated Operating Ambient Temperature
If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be
greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment
compatible with the specified operating temperature range.
20. Reduced Air Flow
Installation of the equipment in the rack should be such that the amount of airflow required for safe operation of the
equipment is not compromised.
21. Mechanical Loading
Mounting of the equipment in the rack should be such that a hazardous condition is not caused by uneven mechanical
loading.
22. Circuit Overloading
Consideration should be given to connection of the equipment to supply circuit and the effect that overloading of circuits
might have on over-current protection and supply wiring. Appropriate consideration of equipment nameplate ratings should
be used when addressing this concern.
23. Reliable (Grounding)
Reliable grounding of rack mounted equipment should be maintained. Particular attention should be given to supply
connections other than direct connections to the branch circuit (for example, use of power strips).
Warning
Warranty is void if seal or label is removed or damaged.

5
The List of Configuration
DVR Set
A, C Type
4CH
8CH
16CH
B, D, E Type
4CH
8CH
16CH
CD (CMS Software/Manual)
Remote Controller
Manual
Screws
HDD Brackets
Data Cable
Power Cable
(Except E Type Model)

6
Operation Precautions
Power Off
Do not turn DVR off, or plug off the power adapter while DVR is in operation (record/playback). Otherwise, it may cause
permanent damage to the equipment. Please click () SETUP>SYSTEM>Shutdown sequentially and then remove the
power after DVR is shutdown completely. It is safe to wait for 5 seconds before turning the power on again.
Do not turn DVR off, or plug off the power adapter while External storage device (e.g., USB memory stick, removable
external hard disk and the like) in use. Otherwise, it may cause permanent damage to the equipment. Make sure that the
power switch is in the “ON” position until data storage is completed. Please be aware that removing the storage device
cause the same damage to the equipment.
Do not turn DVR off, or plug off the power adapter during the format of the hard disk. Otherwise, it may cause permanent
damage to the equipment. Make sure that the power switch is in the “ON” position until the formatting of the disk is
completed.
HDD Installation / Addition / Moving / Replacement / Removal
For installation/addition/replacement/Removal of HDD (DVD-RW), make sure that DVR is turned off. Otherwise, it may
cause permanent damage to the HDD (DVD-RW).
When wish to power DVR off, please click () SETUP>SYSTEM>Shutdown sequentially and then remove the power after
DVR is shut down completely.
Installation/Addition/Moving/Replacement: Start ‘HDD initialization’ including formatting. Otherwise, DVR would not
recognize the hard disk and may begin to function abnormally. Please follow the below procedure for ‘HDD initialization’.
① (Date/Time setup) Set up the current date and time (SETUP>SYSTEM>Admin>Date/Time).
② (Initialization of system setup) All setup values are restored to original factory default settings.
(SETUP>SYSTEM>Information>Status>Setup>Default).
③ (HDD format) HDD format is done by SETUP>SYSTEM>Admin>Storage>Format. If there are more than two HDDs,
each must be formatted, separately. When the format is completed, DVR will auto-reboot.
Removal: Follow the Remove procedure even when a pre-installed hard disk has been removed.
-SETUP>SYSTEM>Admin>Storage>Format, click () ‘Removed’ item under the discrete Format headings of a
corresponding HDD to discard ‘HDD’ item. When the Remove procedure is completed, DVR will auto-reboot.
Date / Time Change
Any change in Date/Time is immediately applied onto live video (LIVE), but the date/time when the recording was done are
not changed.
Make sure to reboot DVR after adjusting the Date/Time.
Also, do not forget to execute SETUP>SYSTEM>Shutdown in sequence before reboot.
Upgrade
Do not upgrade until install a hard disk drive. Make sure that upgrade when the hard disk drive is in proper operation.
Using a Mouse
Left mouse button: have the same function as Enter () on the Front panel of DVR.
Central button (wheel): have the same function as Search key on the Front panel of DVR(display search menu).
Right mouse button: display a number of ‘Function keys’ (please see ‘Input Device and Screen Icons>Using a mouse’ in
this manual).
PLAY / PAUSE Key
Press the PLAY/PAUSE key to one-touch playback on the viewing screen (playback the recorded video from the last one
minute).
Every time pressing the PLAY/PAUSE key during playback mode, it is changed to ‘1X PLAY’ and ‘PAUSE’. The displayed
sign on the screen also changes from to II.
If wish to change mode (1X PLAY, REW, FF, BACKWARD, FORWARD) during playback, always press the PLAY/PAUSE
key first (please see if the sign II is shown on the screen).
Press the PLAY/PAUSE key to back up. Make sure that the backup is done in ‘PAUSE’ mode.
Camera Title
Camera Title displayed in Record and Playback modes of DVR is set to CAM1 ~CAM16. Registering camera title in setup
menu (DEVICES>Camera/PTZ>Title) is to make every setup process easier.

7
Table of Contents
Server
1. PRODUCT FEATURES.............................................................9
1.1 Unpacking..............................................................................9
1.2 Service...................................................................................9
1.3 System Connection Diagram .................................................9
2. INSTALLATION.......................................................................14
2.1 Hard disk and DVD-RW Installation.....................................14
2.1.1 SATA Port....................................................................14
2.1.2 Internal SATA Storage (D, E Type)..............................14
2.1.3 HDD Installation...........................................................15
2.1.4 DVD-RW installation....................................................15
2.2 Connector Wiring .................................................................16
2.2.1 Video-In/Out Connections............................................16
2.2.2 Monitor Connections (Video Out, VGA, Spot)..............16
2.2.3 HDMI connections (C, D Type)....................................16
2.2.4 Audio Connections.......................................................17
2.2.5 TCP/IP(Ethernet) Connections ....................................17
2.2.6 Alarm Connections.......................................................17
2.2.7 RS-485/422 Connections.............................................17
2.2.8 USB Connections.........................................................17
2.2.9 RS-232 Connections....................................................17
2.2.10 Factory Reset Switch...................................................17
2.2.11 Power Supply connections...........................................17
2.2.12 Connections Guideline.................................................18
3. INPUT DEVICE AND SCREEN ICONS...................................19
3.1 Key and LEDs......................................................................19
3.2 Camera Select Keys for 16 Channel DVR...........................21
3.3 Front Panel...........................................................................21
3.4 Using a Remote Controller...................................................22
3.5 Using a Mouse.....................................................................22
3.6 Screen Icon..........................................................................23
4. SETUP .....................................................................................24
4.1 Login / Logout ......................................................................24
4.2 SYSTEM ..............................................................................25
4.2.1 Information...................................................................25
4.2.2 Admin...........................................................................28
4.2.3 Account........................................................................31
4.2.4 System Log..................................................................33
4.2.5 Exit...............................................................................34
4.2.6 Shutdown.....................................................................34
4.3 DISPLAY..............................................................................34
4.3.1 OSD .............................................................................34
4.3.2 Main Monitor................................................................35
4.3.3 Spot Monitor.................................................................36
4.3.4 Spot Monitor Control on Display Mode........................36
4.3.5 Multi Spot (C, D Type) .................................................36
4.3.6 VGA (C, D Type)..........................................................36
4.4 DEVICES .............................................................................37
4.4.1 Network........................................................................37
4.4.2 Camera / PTZ ..............................................................40
4.4.3 Audio........................................................................... 41
4.4.4 Alarm In....................................................................... 41
4.4.5 Alarm Out.................................................................... 42
4.4.6 Serial In....................................................................... 42
4.5 RECORD............................................................................. 42
4.5.1 Setting......................................................................... 43
4.5.2 Schedule ..................................................................... 45
4.5.3 Pre Alarm .................................................................... 46
4.5.4 Motion Detection ......................................................... 47
4.5.5 Holiday ........................................................................ 48
4.6 LINK .................................................................................... 48
4.6.1 Alarm In....................................................................... 48
4.6.2 Motion Event ............................................................... 49
4.6.3 Video Loss................................................................... 49
4.6.4 System Event.............................................................. 50
4.6.5 Popup Link .................................................................. 50
5. OPERATION INSTRUCTION ................................................. 52
5.1 Viewing................................................................................52
5.1.1 First Image .................................................................. 52
5.1.2 View Format................................................................52
5.1.3 Digital Zoom................................................................ 53
5.1.4 Freeze Live Image....................................................... 53
5.1.5 Pan / Tilt Control.......................................................... 53
5.1.6 System Log ................................................................. 54
5.1.7 Key Lock...................................................................... 54
5.1.8 Emergency Recording.................................................54
5.2 Search.................................................................................55
5.2.1 Date / Time Search .....................................................55
5.2.2 Calendar Search ......................................................... 55
5.2.3 Event Search............................................................... 56
5.3 Playback..............................................................................57
5.4 One-touch Playback............................................................ 58
5.5 Archive ................................................................................58
5.6 Menu Bar............................................................................. 59
5.7 Color Control and Position ..................................................60
5.8 Alarm Out Control................................................................ 61
CMS
6. PROGRAM INSTALLATIONS................................................ 63
6.1 System Recommendations ................................................. 63
6.2 Program Installation Method ...............................................63
6.3 Login.................................................................................... 64
7. FUNCTION AND INSTRUCTIONS......................................... 65
8. WATCH MODE ....................................................................... 66
8.1 LOGIN Screen..................................................................... 66
8.2 Local Setting........................................................................ 66
8.2.1 System Setup.............................................................. 66
8.2.2 Remote Site................................................................. 67

8
8.3 Live Video ............................................................................69
8.3.1 Network Connection.....................................................69
8.3.2 Watch Mode.................................................................70
8.3.3 Multi Screen.................................................................71
8.3.4 Screen Color Adjustment.............................................71
8.3.5 Audio............................................................................72
8.3.6 System Log..................................................................72
8.3.7 Alarm Out.....................................................................72
8.3.8 One touch Recording...................................................72
8.4 PTZ Control..........................................................................72
8.5 Health Check........................................................................74
8.5.1 Camera connections and Operating Status.................74
8.5.2 HDD connections and Operating Status......................74
8.5.3 Recording Status .........................................................75
8.5.4 Motion Recording Status..............................................75
8.5.5 Alarm In Connection and Operating Status .................75
8.5.6 Alarm Out Connection and Operating Status...............75
8.6 Remote Setting ....................................................................75
9. SEARCH MODE ......................................................................77
9.1 Search Screen .....................................................................77
9.2 Remote Search....................................................................78
9.3 Local Search........................................................................78
9.4 Event Search........................................................................79
9.5 Playback...............................................................................79
9.5.1 Playback Control Button ..............................................79
9.5.2 Print..............................................................................80
9.5.3 Save.............................................................................80
9.5.4 Archive.........................................................................80
10. OTHERS ..................................................................................82
10.1 Viewer..............................................................................82
10.2 E-MAP..............................................................................82
10.3 Watermark Check System ...............................................84
10.4 Estimator..........................................................................84
10.5 EXE to AVI Converter ......................................................84
11. CMS WEB CLIENT..................................................................87
11.1 Setup and Login...............................................................87
11.2 Live Display......................................................................88
11.3 Playback Screen..............................................................89
12. CMS MOBILE VIEWER...........................................................91
12.1 i-Phone Mobile.................................................................91
12.1.1 System Requirements..................................................91
12.1.2 Installation....................................................................91
12.1.3 Site Registration...........................................................93
12.1.4 Connection...................................................................94
12.1.5 Uninstall.......................................................................95
12.2 Android Phone .................................................................96
12.2.1 System Requirements..................................................96
12.2.2 Installation....................................................................96
12.2.3 Site Registration...........................................................
97
12.2.4 Connection...................................................................98
12.2.5 Uninstall.......................................................................99
12.3 Windows Mobile............................................................100
12.3.1 System Requirements............................................... 100
12.3.2 Installation................................................................. 100
12.3.3 Site Configuration...................................................... 102
12.3.4 Connection................................................................ 103
12.3.5 Uninstall..................................................................... 104
Application
13. KEYBOARD CONTROLLER................................................ 106
13.1 Connection....................................................................106
13.1.1 Configuration Diagram I ............................................106
13.1.2 Configuration Diagram II ...........................................106
13.1.3 Configuration Diagram III ..........................................107
13.2 Keyboard Setup in DVR................................................107
13.3 Keyboard Configuration................................................. 108
13.4 Operation.......................................................................108
13.4.1 DVR/PTZ Mode conversion....................................... 108
13.4.2 DVR Control Mode.................................................... 108
13.4.3 PTZ Control Mode..................................................... 109
14. SERIAL IN (POS/ATM)......................................................... 111
14.1 Usage of Serial-In Function...........................................111
14.2 Connection Method....................................................... 111
14.3 Connection Diagram......................................................111
14.4 Link................................................................................112
14.4.1 Link Setup ................................................................. 112
14.4.2 Schedule Setup......................................................... 113
14.5 Setup.............................................................................113
14.5.1 Title............................................................................ 114
14.5.2 Port Setting................................................................ 114
14.5.3 OSD Display..............................................................114
14.5.4 Pattern Setting........................................................... 115
14.6 Search...........................................................................117

9
1. Product Features
1.1 Unpacking
This equipment is an electronic appliance, so it should be handled with special care.
After unpacking, please check if all the following items are included.
-DVR Main body
-A , B, C Type : Power Supply Adapter (DC 12V, 5A) and Power Supply Cable
-D Type : Power Supply Adapter (DC 12V, 6.67A) and Power Supply Cable
-E Type : Power Supply Cable
-Remote Control With 2 AAA batteries
-Installation CD (CMS Software & User’s Manual)
1.2 Service
If there is any problem in the product, please refer servicing to a supplier or a distributor with qualified service personnel.
1.3 System Connection Diagram
A T
yp
e
–
4 / 8 / 16 channel Series DVR

10
B T
yp
e
–
4 / 8 / 16 channel Series DVR