Ikegami SDR-301 Operating manual

- 1 -
IKEGAMI 11/8/2004
A.
A.A.
A. SDR301/304 Remote Connect Setting Method
SDR301/304 Remote Connect Setting MethodSDR301/304 Remote Connect Setting Method
SDR301/304 Remote Connect Setting Method
( Direct )
( Direct )( Direct )
( Direct )
1)
1)1)
1) Connecting Method
Connecting MethodConnecting Method
Connecting Method
When it is direct connection,
The LAN Cable
LAN CableLAN Cable
LAN Cable must be Cross Over Type
Cross Over TypeCross Over Type
Cross Over Type.
SD
SDSD
SDR301/304
R301/304R301/304
R301/304
SDR300 Viewer (PC)
SDR300 Viewer (PC)SDR300 Viewer (PC)
SDR300 Viewer (PC)
SDR : 192.168.1.100㩷㩷㩷㩷㩷
㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷
㩷㩷㩷㩷㩷
Fo
FoFo
For example (PC)
r example (PC)r example (PC)
r example (PC)
IP IP ADDRESS : 192.168. 1.200
SUB NET MASK : 255.255.255. 0
Set the IP Address, because DHCP server is not used.
For example (SDR301/304
For example (SDR301/304For example (SDR301/304
For example (SDR301/304)
))
)
IP IP ADDRESS : 192.168. 1.100
SUB NET MASK : 255.255.255. 0
CLIENT NAME: user1
PASSWORD: 1
PC : 192.168.1.200㩷㩷㩷㩷㩷
㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷
㩷㩷㩷㩷㩷
Firewall
FirewallFirewall
Firewall
When there is the Firewall function of “Anti Virus
Soft” ,“Winds XP” and “Router” etc,
O
p
en UDP Port No. 10000 / 10001.
PC
PCPC
PC
The PC has SDR300 Viewer software installed.

- 2 -
2)
2)2)
2) SDR301/304 Setting Method
SDR301/304 Setting MethodSDR301/304 Setting Method
SDR301/304 Setting Method
Setting the IP Address of the SDR301/304
Setting the IP Address of the SDR301/304Setting the IP Address of the SDR301/304
Setting the IP Address of the SDR301/304
1.Press MENU to display the [SETUP MENU].
2.Move to [NET] by > .
3.Press ENTER to display the [IP MENU].

- 3 -
4.Press ENTER twice and select the [ACQUISITION : MANU
MANUMANU
MANU] by > .
5.Press ENTER twice and enter the [IP ADDRESS : 192.168.
192.168.192.168.
192.168. 1.100
1.1001.100
1.100 ] by > .
( for example [IP ADRESS : 192.168.
192.168.192.168.
192.168. 1.100
1.1001.100
1.100 ] )
6.Press ENTER twice and enter the [SUB NET MASK : 255.255.255.
255.255.255.255.255.255.
255.255.255. 0
00
0] by > and press RET/CANCEL.
( for example [SUB NET MASK : 255.255.255.
255.255.255.255.255.255.
255.255.255. 0
00
0] )

- 4 -
Setting the CLIENT
Setting the CLIENTSetting the CLIENT
Setting the CLIENT
1. Select the [CLIENT] by > .
2.Press ENTER to select the [MOVE].
3.Press ENTER to display the [CLIENT MENU].
Please check “MTU:1454
14541454
1454”.
When it is not “1454
14541454
1454”,
Please enter “1454
14541454
1454”.

- 5 -
4.Press ENTER and select the ON
ONON
ON by > .
5.Press ENTER to select the [NAME].
6.Press ENTER to display the [CLIENT NAME] and enter the [NAME : user1
user1user1
user1] by ENTER& >.
( for example [NAME : user1
user1user1
user1] )

- 6 -
7.Press RET/CANCEL and select the [PASSWORD] by > .
8.Press ENTER to display the [CLIENT NAME] and enter the [PASSWORD : 1
11
1 ] by ENTER& >.
( for example [PASSWORD : 1
11
1 ] )

- 7 -
9.Press NEMU to finish the [SETUP NEMU] and turn on the power supply again by the Main power switch
on the back.
Please make sure you read the operation manual prior to use in order to ensure you gain a
sufficient understanding of the SDR301/304.

- 8 -
3)
3)3)
3) SDR300 Viewer ( PC ) Setting
SDR300 Viewer ( PC ) SettingSDR300 Viewer ( PC ) Setting
SDR300 Viewer ( PC ) Setting Method
MethodMethod
Method
Setting the Host and User
Setting the Host and UserSetting the Host and User
Setting the Host and User
1.Start the [SDR-300 Viewer] of the PC.
2.Click Connect and select Connect To Info from task bar.

- 9 -
3.Display the [SDR Connect Information].
4. Click Add Host to display the [Host information Registration].

- 10 -
5. Enter the [SDR Name : SDR304
SDR304SDR304
SDR304] , [Address : 192.168.
192.168.192.168.
192.168. 1.100
1.1001.100
1.100 ] and [Port No : 80
8080
80 ] and click OK.
( for example the [SDR Name : SDR304
SDR304SDR304
SDR304] )
6.Display the [SDR Connect Information] and check the [SDR Name] , [Address] and [Port No].
[Address] is “IP Address” o
f
the SDR-301/304.
[Port No] must be “ 80 ”.