Ikelite WD-3 User manual

Thank you for your purchase of Ikelite equipment. Please read this
instruction manual completely before attempting to operate or dive
with this product. Please refer to the back page of this manual to
register your Ikelite product.
WD-3 Wide Angle Conversion Dome
Product Number 6430.3
I n s t r u c t i o n M a n u a l

Included in the Box ........................................................................P. 2
Attach WD-3 to 3-inch Flat Port ....................................................P. 3
Customer upport..........................................................................P. 4
Limited Warranty ............................................................................P. 4
2
Table of Contents
Included n the Box
WD-3 Dome Lanyard

3
Attach WD-3 to 3- nch Flat Port
WD-3 Dome
3- nch Port
1. Rotate Thumbscrews counterclockwise so no threads show inside WD-3
Dome.
2. Gently push Dome over front of 3-inch Port.
3. Hand-tighten and snug both Thumbscrews. DO NOT over-tighten.
4. Extended areas of Dome Hood should be at the 12 and 6 o’clock
positions to avoid vignetting.
Thumbscrew
Dome Hood

Ikel te Underwater Systems
50 West 33rd Street
Ind anapol s, IN 46208 USA
kel te.com
6430.3_WD-3_Dome_and_Color_Filter_01-0915
© 2015 Ikelite Underwater ystems
This Ikelite product is warranted against any manufacturing defects for a
period of one (1) year from the original date of purchase. Defective
products should be returned to Ikelite postage paid. Ikelite will, at its sole
discretion, repair or replace such products, and will return to customer
postage paid. All other claims of any nature are not covered. Except as
mentioned above, no other warranty expressed or implied applies to this
Ikelite product.
L m ted Warranty
Customer Support
Ikelite Underwater ystems
ervice Department
50 West 33rd t.
Indianapolis, IN 46208 U A
Email: [email protected]
Phone: [phone]