Ikelite Wide Angle Port M67 Quick start guide

Wide Angle Port M67 for Sony Cyber-shot
RX100 VI Housing
Item number 9306.02
Included in the Box
• Wide angle port
• O-ring # 0132.30 (installed)
• Vinyl cover # 0200 (installed)
• Silicone lubricant # 0184.1
Tools Recommended
• Rubber strap wrench # 0945.01 (not included)
Housing Compatibility
• Ikelite Underwater Housings for Sony Cyber-shot RX100
VI # 6116.18
Important Notices
»Do not use alcohol, cleaning agents, spray lubricants,
Rain-X, or other solvents on the housing or lens port.
Use of an incompatible chemical compound can
damage the plastic or component o-rings, which may
result in leaking.
»This port is not recommended for use with any models
of RX100-series housings except as listed above.
Installation and Use
Removing the Standard Port
1. Rotate the lens port counter-clockwise to remove. We
recommend using a rubber strap wrench (not included).
2. Store the port with o-ring in a dry, dust-free environment.
Installing the Wide Angle Port
1. Check that the o-ring is in its groove on the back of the
wide angle port.
2. Apply a very light, even coat of Ikelite silicone lubricant to
the exposed surface of the o-ring.
3. Align the threads of the wide angle port with the threads
of the opening in the front of the housing.
4. Facing the front of the housing, rotate the wide angle port
clockwise and tighten until snug.

Testing the Housing
1. Assemble the housing without a camera installed.
2. Submerge the housing in fresh water for several minutes.
3. Remove the housing from water and dry the outside of the
housing with a clean, lint-free cloth.
4. Look through the back of the housing for signs that water
has entered the housing. Signs include fogging or water
droplets.
5. We recommend making at least one dive without a
camera installed to ensure waterproof operation.
Maintenance and Storage
Post-Dive
1. Rinse the housing with wide angle port installed in clean,
fresh water.
2. NEVER leave your housing in the fresh water rinse tank.
Collisions with other gear can cause scratches or damage
to your equipment.
3. Dry the port and glass with a clean micro ber lens
cleaning cloth.
4. Attach the protective vinyl cover.
5. Stow the housing in a shaded place where it is protected
from impact or overheating. If no shade is available, we
recommend covering the housing with a towel or cloth.
Travel and Storage
1. Clean and dry the exterior of the wide angle port. DO NOT
use any type of alcohol or glass or surface cleaner on the
dome port.
2. Attach the protective vinyl cover.
3. Store in a cool, dry place.
Limited Warranty
This Ikelite product is warranted against any manufacturing
defects for a period of one (1) year from the original date
of purchase. To obtain warranty service, the product must
be returned to Ikelite postage paid. Ikelite will, at its sole
discretion, repair or replace such products, and will return
to customer postage paid. All other claims of any nature are
not covered. Except as mentioned above, no other warranty
expressed or implied applies to this Ikelite product.
Contact Us
Ikelite Underwater Systems
50 W 33rd St
Indianapolis, IN 46208 USA
[phone]
[email protected]