iLive IAEBT300 User manual

Truly Wire-Free Earbuds
User’s Guide for Model IAEBT300 v2444-01
Charger Power
ON/OFF
Main Function Button
Press and hold to power ON and OFF
Press once to pause or resume playback.
Quickly press right earbud twice to skip to next track.
Quickly press left earbud twice to skip to previous track.
Press and hold to power OFF.
Earbud Charging Tip
Charging the Earbuds
1. Open the cover and place the earbuds in their docking
stations. Be sure to press down so the earbuds make
contact with the charging tip.
2. Press the Power button on the case to power it ON and
charge the earbuds.
3. When charging, the LED Indicators on the earbuds will
turn red. When charging is complete, the indicators on
the earbuds will turn blue then o.
Charging the Case
Using a Micro-USB to USB cable, connect
to the USB port of a powered on computer
or USB power adaptor (not included) to
charge the case.
Charger Battery Indicator LED
Flashes red when charging.
Solid red when charging is complete.
Charger Power Indicator LED
Blue when ON.
NOTE: Each earbud must be
powered ON separately.
Earbud Indicator LED &
Microphone
Red when charging.
Blue when fully charged.
Pull the case top
up to open.
IAEBT300-2444-01-IB - 02Jan2020.indd 1 1/2/2020 9:17:35 AM

Customer Support
Customer Service: 1-888-999-4215 | Email Support: prodinfo@
dpiinc.com | Email Parts: [email protected]
For Warranty Information and the most up-to-date version of
this User’s Guide, go to www.iLiveElectronics.com
To download this User’s Guide in English, Spanish, or French, or
to get answers to frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y
francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol
ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur:
www.iLiveElectronics.com
Copyright © 2020 Digital Products International (DPI, Inc.) All
other trademarks appearing herein are the property of their
respective owners. Specications are subject to change without
notice.
FCC Warnings
WARNING: Changes or modications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings
• WARNING: To prevent re or shock hazards, do not expose this unit to rain
or moisture.
• WARNING : Where the mains plug or appliance coupler is used as the
disconnect device, such disconnect device shall remain readily operable.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be
recycled or disposed of according to state and local guidelines. They should
never be disposed of in normal household waste, and they should never be
incinerated, as they might explode. Contact your local government for disposal
or recycling practices in your area.
• This product meets and complies with all Federal regulations.
•To avoid hearing damage, make sure that the volume on your music player
is turned down before connecting your headphones. After placing headphones
in/on your ears, gradually turn up the volume until you reach a comfortable
listening level.
Speakerphone
1. To accept a call, press the Function button, or use the
controls on the connected phone. To end a call, press the
Function button again.
2. To reject a call, press and hold the Function button.
Initial Linking Earbuds & Pairing Bluetooth
Earbuds auto power ON when removed from the case. If
not, press and hold the Function button, and they will
automatically link to each other after a few seconds. A beep will
indicate earbuds are connected.
1. With the earbuds linked, you can now connect to your
Bluetooth device. The LED indicator on both of the
earbuds will ash blue, indicating it is ready to pair to a
Bluetooth device.
2. On your Bluetooth device, access Bluetooth Settings
and search for nearby devices. Select IAEBT300 when
it is discovered. When successfully connected to your
Bluetooth device, the LED indicator will slowly ash blue
and a voice prompt will announce the connection.
3. Audio played through the connected Bluetooth device
will now be heard through both earbuds. Use the
controls on the connected device to play audio and
adjust volume.
Note: To use a single earbud, take one earbud out of the case, it
will auto POWER ON and the LED Indicator will ash blue and
red, indicating it is ready to pair a Bluetooth device and start
from step 2.
PLEASE NOTE: Due to the nature of truly wireless
earbuds, you may experience slight interruptions
with your audio in areas with multiple 2.4Ghz
bands or in high wireless trac areas.
WARNING : This product can expose you to chemicals
including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
This product meets and complies with all Federal
regulations.
Troubleshooting
If the earbuds experience any static, delay or cutting out of
sound follow these steps.
• Make sure the earbuds are fully charged.
• Power the earbuds OFF, then ON again. Let them
reconnect automatically and try playing audio again.
Repeat if needed.
If the earbuds should become unpaired or will not connect
normally, open your device’s Bluetooth Settings Menu and
follow these steps.
• Disconnect, then reconnect to the earbuds.
• If the problem persists, delete the earbuds from the list
of available devices (“Forget This Device”).
• Turn Bluetooth OFF then ON again, and repeat the Initial
Bluetooth Connection steps.
If two earbuds can not link successfully, press and hold to
POWER OFF and POWER ON of each earbud again, the LED
indicator on both of the earbuds will ash blue and red slowly.
• Quickly press the left earbud twice to link the earbuds. A
beep will indicate earbuds are connected.
• Then repeat the Initial Bluetooth Connection steps.
IAEBT300-2444-01-IB - 02Jan2020.indd 2 1/2/2020 9:17:35 AM
The device has been evaluated to meet general RF
exposure statement.
The device can be used in portable exposure condition
without restriction
FCC ID:2ATD3-IAEBT300