iLive IAEB34B User manual

USER’S GUIDE
V: 938-02
For the most up-to-date version of this User’s Guide,
go to www.iLiveElectronics.com
IAEB34B
Bluetooth Wireless Earbuds

Warnings and Precautions
• WARNING: To prevent re or shock hazards, do not expose this unit to rain or moisture.
• WARNING:Do not place this unit directly onto furniture surfaces with any
type of soft, porous, or sensitive nish. As with any rubber compound made
with oils, the feet could cause marks or staining where the feet reside. We
recommend using a protective barrier such as a cloth or a piece of glass between
the unit and the surface to reduce the risk of damage and/or staining.
• WARNING : Lithium batteries, like all rechargeable batteries are recyclable
and should be recycled or disposed of in normal household waste. Contact
your local government for disposal or recycling practices in your area.
They should never be incinerated since they might explode.
• Note : This device uses an internal rechargeable lithium-ion battery that should
last the lifetime of the device. If you suspect your battery may be dead after
several attempts to charge, please contact 1-888-999-4215 for support.
• Never disassemble the unit or attempt to remove the battery as
that could cause leakage of an electrolytic substance.

FCC Warnings
Warning: Changes or modications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.

Features
• Supports Bluetooth v4.0
• Supports prole A2DP
(Advanced Audio
Distribution Prole)
• Digital volume control
• Built-in microphone
• Driver: 10mm
• USB port for bat-
tery recharge
• Wireless range: 33 feet
• DC battery power:
built-in rechargeable
lithium ion battery
• Battery life: ~6 hours audio
Includes
• 3 sets of eartips: 1 small,
1 medium, 1 large
• 2 detachable earhooks
• USB cable
• Carry pouch

Introduction
VOL
Microphone
Volume Up
Power/Play/Pause/
Speakerphone/Pair
Press and hold to turn
the unit on and o.
Press to play or pause
the current track.
Press to answer an
incoming call.
Volume Down
Pairing/Power
Indicator
DC IN
Installing and Wearing Earhooks
When connecting the earhooks you should
hear a snap or a click when put in to place.
MIC
DC IN

Battery Power
1. Connect the included USB cable to the USB port on a
powered computer to charge. Charge fully before use.
The indicator will display a red light when charging, and turn
blue when fully charged.
Initial charge time ~2 hours.

1. Power on the unit by pressing and holding the Power/Pair
button for ~4 seconds. The indicator will ash red and blue.
When pairing, remain within 3 feet of the unit.
2. Using the native controls on your Bluetooth device, select
“IAEB34” in your Bluetooth settings to pair. If your device
requests a password, enter the default password“ 0 0 0 0 ”.
Refer to the user’s manual for your specic device for instructions on pairing
and connecting Bluetooth devices. After initial pairing, the unit will stay
paired unless unpaired manually by the user or erased due to a reset of the
device. If your device should become unpaired or you nd it is unable to
connect, repeat the above steps.
Pairing a Bluetooth Device

Playing Audio Wirelessly
1. Follow the instructions for Pairing a Bluetooth Device.
2. Use the native controls on the connected
Bluetooth Device to select a track.
3. To play or pause the selected track, use the native
controls on the connected Bluetooth Device or press the
Power/Play/Pause/Speakerphone/Pair button.
4. Audio played through the connected Bluetooth
device will now be heard through the speakers.

Using the Speakerphone
1. Follow the instructions for Pairing a Bluetooth Device.
2. When a call is received, a ringtone will sound
through the earbuds speakers.
3. Press the Power/Play/Pause/Speakerphone
button to accept the call or accept the call with the
native controls on the connected device.
4. The incoming call received through the device will
now be heard through the earbuds speakers.
5. To end the call, press the Power/Play/Pause/
Speakerphone button or end the call using
the native controls on the connected device.
To re-dial the last dialed number,press the Power/Pair key twice.

LED Indicator
Status Indicators
Power on Flashing blue light
Power o No light
Charging Red light
Finished charging Blue light
Pairing mode Flashing red and blue lights
Low power Flashing red light