iLive IAEBTNQ102 v2900-01 User manual

Charging the Case
Using a USB-C to USB cable (included),
connect to the USB port of a powered-on
computer or UL certied USB power adaptor
(not included) to charge the case. When
the case is charging the Power & Battery
Indicator LEDs will ash blue. When fully
charged all LEDs will turn solid blue.
Truly Wireless Noise Canceling Earbuds
User’s Guide for Model IAEBTNQ102
Power & Battery Indicator LEDs
The 4 Blue LEDs represent the amount of battery the
case charger has.
1 LED=25%
2 LEDs=50%
3 LEDs=75%
4 LEDs=100%
• Touch and hold for 5 seconds to power ON/OFF.
• Tap to play/pause music.
• Tap to answer/end phone calls.
• Press and hold for 2 seconds to reject incoming calls.
• Quickly tap twice to skip to next track (RIGHT).
• Quickly tap twice to play previous tracks (LEFT).
• Press and hold for 2 seconds to activate voice assistant
(LEFT).
• Press and hold for 2 seconds to switch modes between:
Normal, Transparent and ANC (RIGHT).
Charging Contacts
Charging Contacts
Charging the Earbuds
1. Open the cover and place the earbuds on the charging
contacts. Be sure to match the left and right earbuds
with the correct docking station in the case.
2. Earbud Indicator LEDs will turn red when charging.
When fully charged, the LEDs will turn o. Note: These
earbuds are quick charging. 20 minutes of charging gives
the earbuds 1 hour and 10 minutes of playtime.
Earbud Indicator LED/Microphone
Red when charging.
Lights o when fully charged.
Function Button
IAEBTNQ102-3069-01-IB - 06Mar2023.indd 1IAEBTNQ102-3069-01-IB - 06Mar2023.indd 1 3/6/2023 2:43:07 PM3/6/2023 2:43:07 PM

Charging Case & Auto-On Feature
While the case power is ON:
• Placing the earbuds in the charging case will
automatically power them o and begin charging.
• Removing the earbuds from the case will automatically
power them on, link them, and connect to the last used
Bluetooth device (earbuds must have been linked and
connected to a Bluetooth device already).
Pairing Bluetooth
Note: When earbuds are powered on, they automatically
link and enter into pairing mode. You can power on a single
earbud to use as a single unit if you wish.
1. With the earbuds linked, you can now connect to your
Bluetooth device.
2. On your Bluetooth device, access Bluetooth Settings and
search for nearby devices. Select IAEBTNQ102 when
it is discovered. When successfully connected to your
Bluetooth device, a voice prompt will announce the
Bluetooth connection.
3. Audio played through the connected Bluetooth device
will now be heard through both earbuds. Use the
controls on the connected device to play audio and
adjust volume.
PLEASE NOTE: Due to the nature of truly wireless
earbuds, you may experience slight interruptions
with your audio in areas with multiple 2.4Ghz
bands or in high wireless trac areas.
Customer Support
Customer Service: 1-888-999-4215 | Email Support: prodinfo@
dpiinc.com | Email Parts: [email protected]
For Warranty Information and the most up-to-date version of
this User’s Guide, go to www.iLiveElectronics.com
To download this User’s Guide in English, Spanish, or French, or
to get answers to frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y
francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol
ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur:
www.iLiveElectronics.com
Copyright © 2020 Digital Products International (DPI, Inc.) All
other trademarks appearing herein are the property of their
respective owners. Specications are subject to change without
notice.
FCC Warnings
WARNING: Changes or modications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings
• WARNING: To prevent re or shock hazards, do not expose this unit to rain
or moisture.
• WARNING: Where the mains plug or appliance coupler is used as the
disconnect device, such disconnect device shall remain readily operable.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be
recycled or disposed of according to state and local guidelines. They should
never be disposed of in normal household waste, and they should never be
incinerated, as they might explode. Contact your local government for disposal
or recycling practices in your area.
• This product meets and complies with all Federal regulations.
• To avoid hearing damage, make sure that the volume on your music player
is turned down before connecting your headphones. After placing headphones
in/on your ears, gradually turn up the volume until you reach a comfortable
listening level.
WARNING : This product can expose you to chemicals
including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
This product meets and complies with required Federal
product guidelines.
Active Noise Canceling
The Active Noise Canceling feature will electronically mute
background noise. It can be used to enhance the quality of any
music or audio that is playing through the earbuds.
Transparent Mode enables the earbuds to pick up external
sounds, so you can stay aware of your surroundings.
Wireless Charging
The earbud charging case can be charged wirelessly. If you
have a wireless charging pad or device, you can set the case
onto the wireless charger and power your earbud case.
IAEBTNQ102-3069-01-IB - 06Mar2023.indd 2IAEBTNQ102-3069-01-IB - 06Mar2023.indd 2 3/6/2023 2:43:07 PM3/6/2023 2:43:07 PM
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
FCC ID: 2AHI6NIAEBTNQ102