iLive IAHB6 v1930-01 User manual

FCC Warnings
Warning: Changes or modications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings and Precautions
• To avoid hearing damage, make sure that the volume on your music player is turned down before
connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume
until you reach a comfortable listening level.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of
according to state and local guidelines. They should never be disposed of in normal household waste,
and they should never be incinerated, as they might explode. Contact your local government for
disposal or recycling practices in your area.
• WARNING: This product may contain chemicals known to the State of California to cause birth
defects, or other reproductive harm (California Prop 65). Wash hands after handling.
• This product meets and complies with all Federal regulations.
Overview
Wireless Headphones
User’s Guide for Model IAHB6 v1930-01
Features
• Supports Bluetooth
• Wireless range: 33 feet
• Built-in microphone
• Micro-USB port for battery recharge
• Voice prompts announce
headphone operations
• Folding adjustable headband
• On-ear controls
• DC battery power: built-in
rechargeable lithium ion battery
• Battery life: approx. 5 hours at 100% volume
Includes
• Micro-USB to USB charging cable
• Warranty
• User’s Guide
Power/Pair/Play/Pause/Speakerphone
Press and hold for 7-9 sec. to turn the unit ON and begin pairing.
Press and hold to power OFF.
Press to play or pause audio.
Press to answer or end a phone call.
LED Indicator
Mic
Micro-USB Charging Port
LEFT EARCUP CONTROLS & INPUTS
Changes or modications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.

To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la
sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com
Customer Service: 1-888-999-4215 | Email Support: [email protected] | Email Parts: par[email protected]
Copyright © 2017 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their
respective owners. Specications are subject to change without notice.
International Support
Protect for Today
Sustain for Tomorrow
Made
Green
Bluetooth Wireless Audio
Pairing to a Device and Playing Audio
1. Press and hold the Power/Pair button for 7-9 seconds to power the unit
ON and begin pairing. The pairing indicator will begin quickly ashing red
and blue. When pairing, remain within 3 feet of the unit.
2. Using the controls on your Bluetooth device, select IAHB6 in your Bluetooth
settings/device menu. If your device requests a password, enter the default
password 0 0 0 0 . Refer to the user’s manual for your specic device for
instructions on pairing and connecting Bluetooth devices.
3. When successfully paired, the pairing indicator will turn solid blue and
a voice prompt will announce the connection. Audio played through the
connected Bluetooth device will now be heard through the headphones.
4. Use the controls on the connected device to select and begin playing audio.
5. To play or pause audio, use the controls on the connected Bluetooth device,
or press the Play/Pause button on the headphones.
After initial pairing, the unit will stay paired unless unpaired manually by the user,
or erased due to a reset of the device. If your device should become unpaired or
you nd it is unable to connect, repeat these steps.
Using the Speakerphone
1. When a call is received, a ringtone will sound through the headphones.
2. Accept the call by pressing the button or using the controls on the
connected phone.
3. End the call by pressing the button or using the controls on the
connected phone.
4. Re-dial the last number received by pressing the button twice.
STATUS INDICATOR
Power On Flashing blue light
Charging Solid red light
Charging Complete No light
Pairing Quick ashing blue & red lights
Pairing Complete Solid blue light
Playing Audio Slow ashing blue light
Charging the Battery
Requires a Micro-USB to USB cable (included).
Initial charge time is approximately 2 hours. Charge fully before use. The low
battery indicator will ash for 1 minute, then the unit will automatically power OFF.
1. Using a Micro-USB charging cable (included), connect the Micro-USB
charging port on the unit to the USB port of a powered on computer or
USB power adaptor (not included). The unit will now charge.