iLive IAHB68 User manual

Features & Controls
FCC Warnings
Warning: Changes or modications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings and Precautions
• To avoid hearing damage, make sure that the volume on your music player is turned down before
connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume
until you reach a comfortable listening level.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of
according to state and local guidelines. They should never be disposed of in normal household waste,
and they should never be incinerated, as they might explode. Contact your local government for
disposal or recycling practices in your area.
• WARNING: This product may contain chemicals known to the State of California to cause birth
defects, or other reproductive harm (California Prop 65). Wash hands after handling.
• This product meets and complies with all Federal regulations.
Headphone Adjustment
Microphone
Line In
DC Power Input
Power/Pairing Indicator Light
Play/Pause/Volume
Press to play or pause the
current track.
Adjust to turn the volume
up or down.
Features
• Supports Bluetooth
• Wireless range: 33 feet
• Built-in microphone
• Micro-USB port for battery recharge
• Aux in (3.5mm audio input)
• Adjustable headband
• On-ear controls
• Voice prompts announce
headphone operations
• DC battery power: built-in
rechargeable lithium ion battery
• Battery life:
approx. 8 hours at 100% volume
15 hours at 50% volume
Includes
• Micro-USB to USB cable
• 3.5mm audio cable
• Carry pouch
Wireless Headphones
User’s Guide for Model IAHB68 v1932-01
Power/Pair
Press and hold to turn the
unit ON or OFF.
Press and hold for 7-9
sec. to power the unit ON
and begin pairing.

To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the
support section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com
Customer Service: 1-888-999-4215 | Email Support: [email protected] | Email Parts: par[email protected]
Copyright © 2017 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their
respective owners. Specications are subject to change without notice.
International Support
Protect for Today
Sustain for Tomorrow
Made
Green
Using the Speakerphone
1. When a call is received, a ringtone will sound through the headphones.
2. Press the Power/Pair button to accept the call or accept the call with the
native controls on the connected device.
3. The incoming call received through the device will now be heard through
the headphones.
4. To end the call, press the Power/Pair button or end the call using the
controls on the connected device.
Note: To re-dial the last dialed number, press the Power/Pair button twice.
Line In
Using the Audio Input
Requires a 3.5mm audio cable (included).
1. Connect a 3.5mm audio cable to the Line In Input on the unit and the
audio output on an audio device.
2. Use the controls on the connected device to select and play your audio
through the headphones.
LED Indicators
STATUS INDICATOR
Power On Flashing blue light
Power O No light
Charging Solid red light
Charging Complete No light
Pairing Flashing red and blue lights
Charging the Battery
Requires a Micro-USB to USB cable (included).
Initial charge time is approximately 2 hours. Charge fully before use. The low
battery indicator will ash for 1 minute, then the unit will automatically power OFF.
1. Using a Micro-USB charging cable (included), connect the Micro-USB
charging port on the unit to the USB port of a powered on computer or
USB power adaptor (not included). The unit will now charge.
Bluetooth Wireless Audio
Pairing to a Device and Playing Audio
1. Press and hold the Power/Pair button for 7-9 seconds to power the unit
ON and begin pairing. The pairing indicator will begin quickly ashing red
and blue. When pairing, remain within 3 feet of the unit.
2. Using the controls on your Bluetooth device, select IAHB68 in your
Bluetooth settings/device menu. If your device requests a password, enter
the default password 0 0 0 0 . Refer to the user’s manual for your specic
device for instructions on pairing and connecting Bluetooth devices.
3. When successfully paired, the pairing indicator will turn solid blue and
a voice prompt will announce the connection. Audio played through the
connected Bluetooth device will now be heard through the headphones.
4. Use the controls on the connected device to select and begin playing audio.
5. To play or pause audio, use the controls on the connected Bluetooth device,
or press the Play/Pause button on the headphones.
After initial pairing, the unit will stay paired unless unpaired manually by the user,
or erased due to a reset of the device. If your device should become unpaired or
you nd it is unable to connect, repeat these steps.