Iluv i316 User manual

Micro Size Hands-Free Headset with
Bluetooth®Wireless Technology
Instruction Manual
i316
Please read this manual carefully before operating and save it
for future reference.
Have a question? Please visit http://www.i-Luv.com

Headset w/ Bluetooth technology V10M10_IM_EN_10222007
www.i-Luv.com
- 1 -
USER SAFETY GUIDE
INSTRUCTIONS ON ENVIRONMENT PROTECTION
Do not dispose of this product in the usual household garbage at
the end of its life cycle; bring it to a collection point for the
recycling of electrical and electronic appliances.
This symbol on the product means the instructions
for use or the packaging will inform about the
methods of disposal. The materials are recyclable
as mentioned in its marking. By recycling, material
recycling, and other forms of re-utilization of old appliances, you
make an important contribution to the protection of the
environment. Please inquire at your local community
administration for an authorized disposal location.
Important Safety Instructions
1. Read instructions – All safety and operating instructions
should be read before the appliance is operated.
2. Retain instructions – The safety and operating instructions
should be retained in a secure place for future reference.
3. Heed warnings – All warnings on the appliance and in the
operating instructions should be observed.
4. Follow instructions – All operating and use instructions
should be followed.
5. Water and moisture – The appliance should not be used
near water (bathtub, kitchen sink, laundry tub, pool, etc.).
6. Heat – The appliance should be situated away from heat

Headset w/ Bluetooth technology V10M10_IM_EN_10222007
www.i-Luv.com
- 2 -
USER SAFETY GUIDE
Important Safety Instructions-Continued
sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.
7. Power sources – The appliance should be connected to a
power supply only of the type described in the operating
instructions or as marked on the appliance.
8. Cleaning – The appliance should be cleaned with a dry cloth.
9. Objects and liquids entry – Care should be taken so that
objects do not fall and liquids are not spilled into the device’s
openings.
10.Servicing – The user should not attempt to service the
appliance beyond that described in the user's operating
instructions. All other servicing should be referred to qualified
service professional.
FCC Notice (USA)
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation. Refer to 47 CFR Sec. 15.19.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio

Headset w/ Bluetooth technology V10M10_IM_EN_10222007
www.i-Luv.com
- 3 -
USER SAFETY GUIDE
FCC Notice (USA)-Continued
communications, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for
help.
NOTE: Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment. Refer to 47 CFR Sec.
15.21.
Industry Canada Notice to Canadian Users
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation of the device. Refer to IC
RSS 210 Sec. 5.11. The term “IC” before the certification or
registration number only means that the registration was
performed based on a Declaration of Conformity and that
Industry Canada technical specifications were met. It does not
imply that Industry Canada (IC) approved this equipment. Refer
to Self-Marking 6(f) and RSP 100 Sec. 4.

Headset w/ Bluetooth technology V10M10_IM_EN_10222007
www.i-Luv.com
- 4 -
USER SAFETY GUIDE
Additional Safety Instructions
•When not in use, keep your device in a safe place where it
will not be bent or crushed.
•Keep this device away from children. Some small and
detachable parts might be swallowed by children and result in
harm to them.
About Electromagnetic Interference (EMI)
This device is designed and manufactured not to exceed the
exposure limit for radio frequency energy, which is set by the
Federal Communications Commission of the U.S government.
The term “EMI” is short for the electromagnetic interference
caused by the electromagnetic field generated by electronic
devices. In fact, most electrical appliances and devices emit
electric and magnetic fields, and most of modern electronic
devices are susceptible to the EMI if they are inadequately
shielded or designed.
•If you use any personal medical device, such as a pacemaker,
please consult the manufacture of your medical device to
determine if it is adequately shielded from EMI. Your
physician might assist you in obtaining this information.
•Please turn off this device if you are instructed to do so,
especially on an airplane or in a hospital.
•Please keep away from medical instruments in a hospital or
medical unit while using this device.

Headset w/ Bluetooth technology V10M10_IM_EN_10222007
www.i-Luv.com
- 5 -
USER SAFETY GUIDE
IMPORTANT NOTES ON HEARING
Your hearing is very important to you and to us. We strongly
recommend you to follow the guideline below in order to prevent
possible damage to or loss of hearing.
Hearing experts caution that listening to loud sounds can
damage hearing over time. With continuous listening to loud
sounds, hearing adapts and will give the impression that volume
has reduced. What seems normal may, in fact, be harmful. To
guard against this before hearing adapts, set the volume at a low
level and slowly increase the volume level until sound can be
heard comfortably and clearly without distortion. Damage to
hearing is accumulative and is irreversible. Ringing or discomfort
in the ears indicates that the volume is too loud. Once a
comfortable listening level has been established, do not increase
the volume level further.
CAUTION!
If you experience a ringing sound in your ear, lower the volume
or discontinue the use of this product.

Headset w/ Bluetooth technology V10M10_IM_EN_10222007
www.i-Luv.com
- 6 -
TABLE OF CONTENTS
GETTING STARTED
Introduction. …..………..……………………………………
…
7
What’s Included in the Package…………………………..… 8
What is Bluetooth wireless technology? ............................. 8
Location of Controls…………………………………………
…
9
Charging the Headset………………………………………… 10
Turning on the Headset………………………………………. 10
Turning off the Headset………………………………………. 10
Pairing the Headset using Bluetooth Wireless Technology
.
11
OPERATING INSTRUCTIONS
Making a call…………………………………………………
…
13
Answering a call……………………………………………… 14
Ending a call…………………………………………………
…
14
Answering a Call while already on the Phone……………
…
14
Rejecting an Incoming Call…………………………………
…
15
Transferring Calls between Devices………………………
…
15
Call Waiting (3-Way Calling)………………………………… 15
Adjusting the Volume / Mute Function……………………
…
16
TROUBLESHOOTING GUIDE
Questions and answers about the product………………
…
17
SPECIFICATIONS
Technical information about the product…………………
…
17

Headset w/ Bluetooth technology V10M10_IM_EN_10222007
www.i-Luv.com
- 7 -
GETTING STARTED
Headset with Bluetooth Wireless Technology
Thank you for purchasing the i316 from iLuv. This headset has
been designed wireless mobile phone connection using
Bluetooth wireless technology. Please keep this manual in a
safe place for future reference.
•Answer or make calls wirelessly without taking your mobile
phone out
•Supports volume control and mute functions
•Compliant with Bluetooth V2.0
•Supports HSP and HFP profiles
•Built-in lithium polymer rechargeable battery
•Standby time up to
100 hours
•Continuous talking
time up to 4 hours
•Charging time Max.
2hours
•Communication range
up to 33ft
•Light weight: 0.3 oz
(9grams)

Headset w/ Bluetooth technology V10M10_IM_EN_10222007
www.i-Luv.com
- 8 -
GETTING STARTED
What’s included in the package?
•Bluetooth hands-free headset
•USB power adapter
•One extra ear tip
•Instruction manual
•Warranty card
What is Bluetooth wireless technology?
Bluetooth wireless technology is a short-range wireless
communication technology intended to replace the cables
connecting electronic devices while maintaining the high level of
security. With Bluetooth wireless technology, two devices can be
connected at the same time without the need to face each other
or the concern of interference from other wireless communication
within its optimum range of 33 feet.
Through a process called “Pairing,” two or more devices with
Bluetooth wireless technology can interact with each other
without interference from other wireless platforms nearby,
including other Bluetooth wireless communications between
unrelated devices.

Headset w/ Bluetooth technology V10M10_IM_EN_10222007
www.i-Luv.com
- 9 -
GETTING STARTED
LOCATION OF CONTROLS
1. Ear hook 4. Multi-function
2. Charging Port Button
3. Ear Piece / Speaker 5. Volume Control
1
2
3
4
5
2
1
3

Headset w/ Bluetooth technology V10M10_IM_EN_10222007
www.i-Luv.com
- 10 -
GETTING STARTED
Charging the Headset
Turning on the Headset
Press and hold the Multi-function button for approximately three
(3) seconds until the blue indicator light begins flashing.
Note: The blue indicator will continuously flash when the power
is on.
Turning off the Headset
Press and hold the Multi-function button for approximately four
(4) seconds until the blue indicator flashes briefly.
Note: No light will flash when the power is off.
Fully charge the headset by connecting the
charger to the mini-USB port on the top of
the headset. The blue indicator will light up
when charging. Once fully charged, the blue
indicator will go out.

Headset w/ Bluetooth technology V10M10_IM_EN_10222007
www.i-Luv.com
- 11 -
GETTING STARTED
Pairing the headset with mobile phones
using Bluetooth wireless technology
1. With the power turned off, press and hold the Multi-function
button for approximately six (6) seconds until a solid blue light
is shown.
2. Set the mobile phone to SEARCH or DISCOVER mode
following the pairing instructions included with the phone,
placing both units close together. Typically mobile phones
have a Bluetooth menu from which
SEARCH can be selected.
3. The mobile phone with Bluetooth wireless
technology will identify the Headset.
4. Confirm with “yes,” or
“ok.”
5. When asked for a passkey or PIN, enter
0000 (4 zeros) and press “yes,” or “ok.”
6. Phone and
headset have
successfully
paired.

Headset w/ Bluetooth technology V10M10_IM_EN_10222007
www.i-Luv.com
- 12 -
GETTING STARTED
Notes on Pairing
This headset will not be recognized by your mobile phone unless
it is properly paired. Once successfully paired, the headset will
automatically connect with your Bluetooth device when it is
turned on. The i316 cannot pair with mobile phones which are
not equipped with Bluetooth wireless technology. To ensure that
correct pairing is accomplished, it is important to follow both
these instructions and those which accompany the
corresponding mobile phone.

Headset w/ Bluetooth technology V10M10_IM_EN_10222007
www.i-Luv.com
- 13 -
OPERATING INSTRUCTIONS
Making a Call
This headset must also be paired with your phone, enabled by
Bluetooth wireless technology in order to make a call.
1. Normal dialing:
a. Dial the telephone number on your mobile phone.
b. Press the SEND/CALL button on the mobile phone.
2. Last number redial: After a call has been made, the number
can be redialed by short-pressing the Multi-function button.
3. Voice dial function: If your mobile phone supports voice
dialing, set up voice tags using the instructions for your
phone. For the best connection with i316, pair and use this
unit when establishing voice tags.
a. Press the Multi-function button for approximately two (2)
seconds.
b. Say the name of the person you wish to call.
c. The number of the selected person will dial and be
connected.
2 sec.

Headset w/ Bluetooth technology V10M10_IM_EN_10222007
www.i-Luv.com
- 14 -
OPERATING INSTRUCTIONS
Answering a Call
Be certain the headset is properly paired with a mobile phone
featuring Bluetooth wireless technology before answering a call.
1. An incoming phone call will be indicated by a ring. Press the
Multi-function button once to answer the call.
2. If the headset is off when there is an incoming call, press the
Multi-function button to turn on the headset and answer the
call as usual.
Ending a Call
There are several ways to end a phone call.
1. Press the Multi-function button on the headset.
2. Press the End key on the mobile phone.
3. A call will also end as the person on the other end hangs up.
Answering a call while already on the Phone
With the i316, it is possible to answer an incoming call while
already on the phone.
1. There will be a sound inflection during the phone
conversation. Press and hold the Multi-function button until
there is a beep. The previous call will be placed on hold
without disconnecting and the incoming call can be answered.
2. To return to the previous call, press the Multi-function button
again until there is a beep sound.
Note: Your mobile phone with Bluetooth wireless technology
must be paired with the i316 BEFORE these functions are
attempted.

Headset w/ Bluetooth technology V10M10_IM_EN_10222007
www.i-Luv.com
- 15 -
OPERATING INSTRUCTIONS
Rejecting an Incoming Call
When there is an incoming call, press and hold the Multi-
function button for approximately two (2) seconds and release
to reject the call.
Transferring Calls between Devices
1. To transfer a current call to your mobile phone when using
the i316, press the Multi-function button for two (2) seconds.
The call will no longer be communicated through the i316.
Use your mobile phone as normal.
2. To transfer a current call to the i316 when using your mobile
phone, press the Multi-function button for two (2) seconds.
The call will now be communicated through the i316.
Call Waiting (3-Way Calling)
If your mobile phone supports the Hands-Free Profile (HFP), you
can use the Call Waiting (3-Way Calling) function on the i316.
1. Press and hold the Volume Down (-) button for
approximately four (4) seconds until three (3) short beeps are
heard through the headset. This enables an incoming /
waiting call to be picked up and ends the current call.
2. Press and hold the Volume Up (+) button for approximately
four (4) seconds until three short beeps are heard through the
headset. This enables an incoming / waiting call to be picked
up while placing the current call on hold.

Headset w/ Bluetooth technology V10M10_IM_EN_10222007
www.i-Luv.com
- 16 -
OPERATING INSTRUCTIONS
Adjusting the Volume / Mute Function
1. To adjust the volume, press the Volume Up (+) or Volume
Down (-) button.
2. To Mute the microphone, press and hold the Volume Down
(-) button for approximately two (2) seconds. A melody will
sound every ten (10) seconds while the microphone is muted.
3. To cancel the Mute function, press either the Volume Up (+)
or Volume Down (-) button.

Headset w/ Bluetooth technology V10M10_IM_EN_10222007
www.i-Luv.com
- 17 -
TROUBLESHOOTING GUIDE
1. The headset does not work with my mobile phone.
Be certain that your mobile phone is equipped with Bluetooth
wireless technology. This headset will only work with such
mobile phones. Additionally, your mobile phone must be
paired with the headset BEFORE all other pairing.
2. There is interference on the headset with my phone.
The maximum distance for Bluetooth wireless communication
is 33 feet (10 meters). When this distance is approached,
background noise will increase. Also, a poor signal on the
mobile phone may contribute to degradation the quality of
sound as well.
3. There is no sound.
Ensure that both the mobile phone and the i316 are turned on,
set up, and paired correctly. Be certain that the volume is
turned up on both devices.
Specifications
•Compliant with Bluetooth V2.0
•Supports HSP and HFP profiles
•Built-in lithium polymer rechargeable battery
•Standby time up to 100 hours
•Continuous talking time up to 4 hours
•Charging time Max. 2hours
•Communication range up to 33ft
•Light weight: 0.3 oz (9grams)

Headset w/ Bluetooth technology V10M10_IM_EN_10222007
www.i-Luv.com
- 18 -

iLuv is a trademark of jWIN Electronics Corp. Features and specifications are
subject to change without prior notification. iPod is a trademark of Apple
Computer, Inc. The Bluetooth word mark and logos are owned by Bluetooth
SIG, Inc. and any use of such marks by jWIN Electronics Corp. is under
license. Mobile phone not included in this package.
© 2007 jWIN Electronics Corp. All rights reserved. No portion of this printed
material or product enclosed herewith including design, shape and graphics,
may be reproduced or transmitted in any form without the expressed written
consent of jWIN Electronics Corp. by any means, electronic or mechanical,
including photocopying, recording or the use of an information storage and
retrieval system. Any unauthorized distribution or reproduction of this printed
material or product, or any portion thereof, will be prosecuted to the fullest
possible extent of the law.
Printed in China
TEL: [phone]
FAX: [phone]
website: www.i-Luv.com