IMG Ruby User manual

SAFETY INSTRUCTIONS
GENERAL WARNINGS:
Never drag furniture when moving it, always lift it.
Periodically check all fixings to ensure none have come loose and re-tighten
where necessary.
Please take care when handling or moving the furniture as careless handling
may cause damage or injury. Furniture can be dangerous if incorrectly
installed. Assembly should be carried out by a competent person. No liability
will be accepted for damage or injury caused by incorrectly insalled or assembled
furniture.
SPECIFIC WARNINGS FOR HEAVY ITEMS:
It is recommended that before moving heavy objects to a new location they
are completely dis-assembled to avoid personal injury or damage to the
furniture. Please be careful to retain all fittings when doing this.
CHAIR SPECIFIC WARNINGS:
Never tilt the chair. Ensure the chair is always placed firmly on the ground.
IMPORTANT SAFETY NOTE:
Do Not:
Use the stool as a ladder
Climb on the stool
Stand on the foot-rest of the stool, as this could lead to the stool becoming
unbalanced and overturning.
WARNING:
•
•
•
•
•
•
•
•
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Do not sit on the armrest or chair footstool/ ottoman.
Do not stand on the chair footstool/ ottoman.
Do not use the chair footstool/ ottoman as a step ladder.
Do not use this chair unless all bolts, screws and knobs are firmly secured.
At least every 4 months – check all bolts, screws and knobs to be sure that
they are tight.
If parts are missing, broken, damaged or worn – stop use of the product
until repair are made, using factory authorized parts only.
For further information see care manual and assembly instruction.
Failure to follow these warnings could result in serious injury.
IMPORTANT
Read this and other relevant instructions
before using the product. Keep this manual
for future reference.
ASSEMBLY INSTRUCTIONS
CONGRATULATIONS
You are now the proud owner of a Ruby by IMG.
We are confident you will enjoy the comfort
and style of this new furniture.
014 EN RUBY 2012.10
imgcomfort.com
IMG Group AS Postboks 251 N-6239 Sykkylven Norway
Tel: + 47 70 27 10 40 offi[email protected]

WOOD CARE
All timber surfaces will change colour and mellow over time.
New furniture will initially vary in shade from items that have been
previously purchased.
TIMBER/ WOOD CARE
•
•
•
Spray polishes are best avoided as they contain silicones which may spoil the
furniture’s surface by building up over time.
Make sure all surfaces are protected from heat and liquids by mats and
coasters. Wipe up spills immediately and ensure that a mat or pad is placed
under paper if you are writing.
Our furniture will endure most temperatures in the home but it is best to
avoid placing furniture next to heat sources such as radiators or fires. Be
particularly careful with solid wood as the lack of humidity caused by central
heating can cause damage such as warping
LEATHER CARE
Protect leather from spillage, sunlight and heat. A slightly damp cloth is the
best cleaning agent for both materials.
•
•
•
•
Do not use any abrasive cleaner or harsh detergent as this can damage the
surface. Care for the leather with leather conditioner. We recommend
applying leather conditioner before using the furniture for the first time.
Avoid spilling or dropping crumbs of food with a high fat content on the
surface as this can permanently mark the leather
GENERAL CARE ADVICE
•
•
•
•
•
•
•
Wood and frame surfaces require regular dusting.
When cleaning is needed, use a damp cloth followed by a dry cloth.
Remove liquid spills or dirt immediately from the frame and mechnism
parts.
Keep leather clean by dusting weekly or by vacuuming with a soft brush
attachment. When cleaning, always use a soft, clean and white cloth.
If necessary, use a lightly moistened soft cloth with clean lukewarm water
and let dry naturally.
Use only proprietary leather care products suitable for leather.
Regular use of proprietary leather conditioner recommended.
Protect from direct sunlight, direct heat and weather fluctuations.
Make sure the room’s humidity is at a normal level.
Visible screws and bolts must be checked regularly and tightened (if
necessary) shortly after purchase. Felt knobs are recommended fitted
underneath the legs or bases if the furniture is to be placed on a wooden
or parquet floor or surface.
Vacuum regularly using low suction.
Clean contact areas of perspiration and body oils regularly.
Remove all liquid, food dirt and stains immediately.
Dry naturally away from direct heat. Persistent stains may require
treatment by a professional cleaner.
CARE AND MAINTENANCE
I
Fitting Identification
A...x1/1
Detail A:
RUBY ASSEMBLING