imilab A1 User manual

IMILAB Home Security
Camera A1
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch

2
English
3 –18
Čeština
19 –34
Slovenčina
35 –50
Magyar
51 –66
Deutsch
67 –82

3
The product user guide contains product features, how to use, and the operating
procedure. Read the user manual carefully to get the best experience and avoid
unnecessary damage. Keep this manual for future reference. If you have any questions
or comments about the device, please contact the customer line.
✉www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

4
Product Overview
Package Contents: IMILAB Home Security Camera A1, power cable, wall mounting
accessories pack, user manual
Status
Indicator
Mic
Lens
Micro SD Slot
(Can be revealed
by pushing the
lens upward)
Front View
Rear View
Micor-USB
Charging port
Loudspeaker
Reset Button

5
Installation
IMILAB Home Security Camera A1 can be placed on a number of horizontal surfaces,
such as a writing desk, dining table, and coffee table. It can also be mounted on the wall.
Mounted IMILAB Home Security Camera A1 on a Wall
1. Drill two holes on the wall by using the base of the IMILAB Home Security Camera A1
as a template. It is recommended that you mark the locations of the hole with a pencil
before drilling. The diameter of each hole is approximately 6 mm, and the depth is
approximately 30mm.
2. Insert the two plastic anchors into the holes on the wall.

6
3. Make sure to position the base unit so that the arrow is pointing up. Secure the base
unit in place by tightening the screws into the plastic anchors.
4. Matching the grooves on the bottom of the camera unit with the raised area on the
base unit. Press down until the two surfaces are flush, then turn the camera unit in
either direction to lock it in position.

7
Warning:
To avoid any damages or injuries, the device must be securely fastened to the
Ceiling/wall as specified in the installation instructions.
When mounting the security camera on a wall:
Please note that the wall must be able to support at least triple the product's total
weight.
Product Instructions
Turning the Device On
IMILAB Home Security Camera A1 will automatically activate once the power cable is
inserted into the Micro-USB charging port.

8
1. If the indicator light is flashing orange, that means the device is activated successfully.
If you do not see a flashing orange light, please press and hold the Reset button to
restart the device to enter pairing mode.
2. Once the IMILAB Home Security Camera A1 is turned on, please do not attempt to
rotate its head by force. If the camera position is incorrect, adjustments can be made
through the app.
Indicator Light
Steady blue on: connected/device status is normal
Flashing blue: network error
Flashing orange rapidly: waiting for connection
Flashing orange slowly: system upgrade in progress
Installing a MicroSD Card
Make sure that the power to IMILAB Home Security Camera A1 is already disconnected.
Adjust the camera lens upward until the MicroSD slot is revealed, then insert the
MicroSD card into the slot (the side with contact points must be facing down).
Note:
Please turn off the IMILAB Home Security Camera A1‘s power supply before inserting or
removing the MicroSD card. Please use a genuine Micro SD card manufactured by a
qualified supplier, with a reading/writing speed of no less than U1/Class 10. (Maximum
support capacity is 256GB)

9
Restore Factory Settings
Press and hold the Reset button to restore your device to factory settings. Data stored
on the MicroSD card is not deleted.
Install Mi Home App
Connect with Mi Home/Xiaomi Home App. This product works with Mi Home/Xiaomi
Home app. Control your device with Mi Home/Xiaomi Home app.
Scan the QR code to download and install the app. You will be directed to the connection
setup page if the app is installed already. Or search “Mi Home/Xiaomi Home” in the app
store to download and install it. Open Mi Home/Xiaomi Home app, tap “+” on the upper
right, and then follow prompts to add your device.
The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of
the app displayed on your device should be taken as the default.
Note:
The version of the app might have been updated, please follow the instructions based
on the current app version.

10
Real-time Surveillance
Launch the Mi Home/Xiaomi Home app and select a IMILAB Home Security Camera A1
that is already connected to monitor the surroundings in real-time. The camera’ s
control interface allows you to adjust the sharpness of the image, as well as to change
the device’ s vertical and horizontal viewing angles.
Additional features such as screen capture or record and remote communications can
also be performed.
Note:
The diagram is for reference only. Actual displays will vary based on different versions of
the Mi Home/Xiaomi Home app and your smartphone model.

11
Supporting Infrared and Image-intensified Night Vision
The camera will automatically switch to night-vision mode based on changing light
conditions. The 6 built-in infrared night vision lights increase the night-vision distance up
to 10 meters, so the camera can clearly capture video in the dark.
Infrared night vision mode sample:
Note:
The diagram is for reference only. Actual displays will vary based on different versions of
the Mi Home/Xiaomi Home app and your smartphone model.

12
Playback
IMILAB Home Security Camera A1’s playback feature is only available after installing a
compatible MicroSD card. Once a MicroSD card has been installed and the security
camera is turned on, videos will be recorded automatically. After entering the user
interface of the Playback feature, simply slide the bar on the timeline to select the time
period you wish to view.
Note:
The diagram is for reference only. Actual displays will vary based on different versions of
the Mi Home/Xiaomi Home app and your smartphone model.

13
Automatic Surveillance
•Home surveillance can be enabled or disabled in the Mi Home/Xiaomi Home app.
•Available options include 24-hour, daytime, and night-time monitoring. You can
also create your own schedule and set the desired camera angle.
•This product is able to detect movements within its field of view. Once
movements are detected, a video is recorded, and you will receive a notification.
Note:
The diagram is for reference only. Actual displays will vary based on different versions of
the Mi Home/Xiaomi Home app and your smartphone model.

14
Shared Remote Viewing
Through the IMILAB Home Security Camera A1 control interface in the Mi Home app,
you can set your security camera as a shared device under the general settings menu
and invite your friends to view the camera remotely.
Your friends will be required to download the Mi Home/Xiaomi Home app and log in
with his/her Xiaomi account.
Note:
The diagram is for reference only. Actual displays will vary based on different versions of
the Mi Home/Xiaomi Home app and your smartphone model.

15
Specifications
Name: IMILAB Home Security Camera A1
Model: CMSXJ19E
Net Weight: 211 g
Lens Angle: 110°
Resolution: 2304 x 1296
Power input: 5 V 2 A
Expandable Memory: MicroSD card
Dimensions: 112 mm x 76 mm x 76 mm
Operating Temperature: -10 °C to 40 °C
Compatible With: Android 4.4 or iOS 9.0 or later
Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz

16
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
•Using the product for any purpose other than that for which the product is intended
or failing to follow the instructions for maintenance, operation and service of the
product.
•Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (e.g. during transport, cleaning
by inappropriate means, etc.).
•Natural wear and aging of consumables or components during use (such as
batteries, etc.).
•Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as used power
supplies, etc.
•If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.

17
EU Declaration of Conformity
Identification data of the manufacturer's / importer's authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440
Subject of the declaration:
Title: IMILAB Home Security Camera A1
Model / Type: CMSXJ19E
The above product has been tested in accordance with the standard(s) used to
demonstrate compliance with the essential requirements laid down in the
Directive(s):
Directive No. (EU) 2014/53/EU
Directive No. (EU) 2011/65/EU as amended 2015/863/EU

18
WEEE
This product must not be disposed of as normal household waste in accordance with
the EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU).
Instead, it shall be returned to the place of purchase or handed over to a public
collection point for the recyclable waste. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste handling of
this product. Contact your local authority or the nearest collection point for further
details. Improper disposal of this type of waste may result in fines in accordance with
national regulations.

19
Uživatelská příručka k výrobku obsahuje funkce výrobku, návod k použití a postup
obsluhy. Přečtěte si pozorně uživatelskou příručku, abyste získali co nejlepší zkušenosti a
předešli zbytečným škodám. Tuto příručku si uschovejte pro budoucí použití. Máte-li
jakékoli dotazy nebo připomínky k zařízení, obraťte se na zákaznickou linku.
✉www.alza.cz/kontakt
✆[phone]
Dovozce Alza.cz a.s. , Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

20
Přehled produktu
Obsah balení: IMILAB Home Security Camera A1, napájecí kabel, balení příslušenství pro
montáž na stěnu, uživatelská příručka
Indikátor
stavu
Mikrofon
Objektiv
Slot pro Micro SD
(lze odhalit
posunutím
objektivu směrem
nahoru)
Pohled zepředu
Pohled zezadu
Nabíjecí
port Micor-
USBC
Reproduktory
Tlačítko Reset