iMoving Beast User manual

WWW.IMOVINGTECH.COM
THIS IS ONLY A SIMPLIFIED GUIDE. FOR MORE DETAILED INSTRUCTIONS AND SAFETY WARNINGS, ETC.,
PLEASE REFER TO THE FULL MANUAL ONLINE.
WARNING:
IMPROPER USE OF THE SCOOTER AND/OR FAILURE TO READ THE QUICK START GUIDE AND USER MANUAL
MAY LEAD TO SERIOUS BODILY INJURIES.
USE THIS PRODUCT AT YOUR OWN RISK.
Read Before Use
1

WWW.IMOVINGTECH.COM 2
Welcome our Family of Products
Dear Family Member,
Congratulations on becoming our newest addition to the iMoving family. Your purchase of an iMoving product makes you part of a community that represents quality,
safety, advanced engineering and service that you will be proud of for many years to come.
As a member of the iMoving circle, you will find support and service anytime you need help. We have built our company so that every member understands the
importance of making your product experience the highest quality possible.
No matter what questions you may have, an iMoving representative will be there to assist.
Thank you for your trust and enjoy your new iMoving product.
iMoving Global

WWW.IMOVINGTECH.COM
IMPORTANT: Secure your key fob
Key fobs are unique to your scooter. If lost you cannot get replacement
Key fobs are needed to arm and disarm your scooter
Two key robs are supplied. We recommend that you keep the spare one in a secure place
Key Fob Diagram Key Scooter Mode
Key Operation
Function
Arm key
Disarmed One press
One h
onk and device is armed in 2 sec.
In armed mode, alarm goes off for 4 sec upon impact
If impacted within 10 sec, alarm goes off 15 sec.
power to motor will be shut off.
Running One press
Scooter enters arm mode. This can help fight off a robber
Disarm key
Armed One press
Stops alarm if it is in progress
Disarm the scooter after two honks
Running One press
Scooter stops after two honks
Locator Any mode
One press
Honk goes off 4 times to help locate it
Press and hold 2
sec.
Adjust sensitivity. Sensitivity level is 2 by default. But you can change it by listening to the beeps. One
beep means level 1 (most sensitive). Level 4 is least sensitive. Level 5 is silent arming.
Release the key upon hearing the intended number of beeps, scooter will enter armed mode
Start
Armed or disarmed
Press twice within
2 sec.
Honk goes off 3 times. Device will start. You can ride without the key fob
3

WWW.IMOVINGTECH.COM
Structural Diagram
Gear indication
Shift gear using the upshift/downshift buttons
on the right side of dashboard. Three gear
indicates the fastest speed and first gear means
slowest speed
Battery level indication
There is a five-bar battery level indicator in the
dashboard. Recommend that you charge the
device when there is only one bar left to prevent
system shutoff.
Power switch
Press quickly to turn on. Press and hold for 2
seconds to turn off
Instructions of Buttons
4
*Single / Dual wheels drive mode
LED lights switch
* Single / Dual wheels drive mode is just applying to Extreme
version only, this button has no function for both Baby and
Adventurer versions.
Please make
sure these 2
wires are
connected

WWW.IMOVINGTECH.COM
Improper Use Cases
Do not ride on slopes
greater than 20⁰ for long
periods of time
5

WWW.IMOVINGTECH.COM
Attention before using
6
The cable to the Yellow/Red buttons are disconnected before
shipping to prevent the lights turning on accidentally in transit.
Please be sure to connect them before turning on the machine.
Battery Charging
1. Plug the charger's output terminal into charging hole on the battery unit,
then plug the charger to AC 120V/60HZ socket and make sure the charging
indicator is on. To avoid damages to the controller, turn the scooter off
during charging. Charging can last 5-10 hours.
2. Charging mode: it is recommended that the scooter be charged once a day
if possible. The whole charging process is automatically controlled: when
the charging indicator turns to green, it means the battery unit has been
fully charged and is in a floating charge state. Floating charge doesn’t cause
any damage to batteries. At this point, it is unnecessary to stop charging
since very little energy is consumed during floating charge.
3. To prevent damage, avoid violent bumps or impacts when riding, shipping
or carrying the charger. Keep charger clear of liquids and metal objects to
avoid risk of short-circuiting.

WWW.IMOVINGTECH.COM 7
Please scan the QR codes below to get the Beast manuals
Beast Manual
Beast Extreme Beast Adventurer Beast Baby