imovr Lander Lite User manual

Lander Lite Adjustable-Height Desk System
INSTALLATION MANUAL

2
PLACE TABLETOP UPSIDEDOWN ON A SOFT SURFACE
Congratulations on the purchase of your new Lander Lite Desk!
Enjoy the health and productivity benets that come from
using an active workstation. The Lander Lite’s technological
advancements allow it to arrive nearly fully-assembled so you
can get standing in a matter of minutes.
STEP 1
BLANKET OR OTHER SOFT SURFACE
TABLE TOP
LOCK (x2)
CLAMP (x2)
LEG 2
(1 SOCKET)
HAND CONTROLLER
POWER SUPPLY CABLE LEG MOTOR CABLE
FOOT
(x2)
LEVELING PAD x4
CROSSBAR
ALLEN KEY
LEG 1
(3 SOCKETS)
HAND CONTROLLER CABLE
MACHINE SCREWS
x8
BEFORE YOU BEGIN

3
ASSEMBLY INSTRUCTIONS
PLACE LEG 1 INTO BASE STEP 2
CONNECT CABLES TO LEG 1
1. Connect Leg Motor Cable 2. Connect Power Supply Cable
STEP 3
3. Connect Hand Controller Cable
Note: Leg 1 has three cable sockets.

4
PLACE CLAMP ON LEG 1 AND PRESS DOWN
STEP 4
STEP 5
PLACE LOCK IN CLAMP
Firmly press the Lock into place using your foot. When you hear a clicking sound, the Lock is secured.
Step Down
ASSEMBLY INSTRUCTIONS

STEP 6
ATTACH FOOT ONTO LEG 1
STEP 8STEP 7
PLACE LEG 2 INTO BASE
Note: Leg 2 has one cable socket for the Leg Motor Cable.
CONNECT LEG MOTOR CABLE TO LEG 2
5
ASSEMBLY INSTRUCTIONS
Place foot on leg. Align the four screwholes. Attach using the provided Hex Screws (4) and Allen Key.

6
FLIP DESK
Two people for this step.
REPEAT STEPS 46 FOR LEG 2
STEP 11
Note: Proceed carefully. When
ipping the desk, do not roll it
onto the edge with the controller
or yank the feet too vigorously.
STEP 10
and tidy up your cords...
STEP 12
PLUG IN POWER SUPPLY
& INITIALIZE YOUR DESK
Your desk is
assembled!
1. Plug in power supply.
2. Hold down hand controller until
desk lowers to its lowest limit.
Release.
3. Hold paddle down for 5 seconds.
Release.
123
ASSEMBLY INSTRUCTIONS

PROGRAMMING YOUR CONTROLLER
Your Lander Lite’s intuitive hand controller is designed to help you seamlessly
transition to a healthy and active work day.
Download the free mobile app!
For easy programming, advanced controller
options, and instructions visit: www.imovr.com/
lander-app
7
Make moving between sitting and
standing easy! Your Lander Lite Desk
can store up to two of your favorite
height positions.
1. Raise or lower your desk to the
height you want to save.
2. Press and hold the “Star”button
for 2 seconds.
Note: Make sure not to tilt the
controller.
3. After the LED turns from blinking
to static white, your height favorite
is saved.
To erase all your height favorites,
press and hold the “Star” button for 8
seconds.
RAISE OR LOWER YOUR DESK TO YOUR
HEIGHT FAVORITES
1. Tilt and hold the controller in the direction you want to
move.
2. When the desk stops, your height favorite is reached.
To raise or lower your desk beyond a height favorite,
continue to tilt the controller until the desk moves again.
STEP 12
SET YOUR HEIGHT FAVORITES
12
3
DESK HEIGHT LIMITS
In case the desk cannot be operated in
its entire span (e.g. a shelf is blocking the
upwards movement or a ling cabinet is
placed under the desk and blocking the
downwards movement), it is possible to set
an upper limit and a lower limit for the desk
height.
Setting upper limit
1. Adjust desk to maximum allowable
height.
2. Press “Bluetooth” and tilt controller
up at
the same time until light ashes.
3. Release “Bluetooth” and controller.
Setting lower limit
1. Adjust desk to minimum allowable
height.
2. Press “Bluetooth”and press controller
down
at the same time until light ashes.
3. Release “Bluetooth” and controller.
Enable Automatic Drive!
Reach a height favorite in just
two taps of your controller.
Download the mobile app and
activate ‘automatic drive’ from
the ‘Settings’ tab.
www.imovr.com/lander-app

SET YOUR REMINDERS TO STAND
Jumpstart your active routine with the Lander Lite’s standing
reminders. Your default reminder is set for 55 minutes of
sitting. When the blinking LED turns from green to orange, it’s
time to stand!
Note: When you press the“Bell” button, the LED lights up white
in three increasing intensities, each representing an interval.
1. Press the “Bell” button once to set the rst interval (55
minutes).
2. Press the “Bell” button twice to set the second interval
(50 minutes).
3. Press the “Bell” button three times to set the third interval
(45 minutes).
4. Press the “Bell” button four times to turn reminders o.
The LED will turn o.
Note: Make sure not to tilt the controller during these steps.
The reminder interval automatically restarts each time you
adjust your desk to a sitting position.
Important: The controller does not remind you to sit, as you
should do this whenever you feel your body needs to rest.
Customize Your Reminder Intervals & Get Push
Notications to Your Phone!
Download the mobile app for iOS or
Android. Navigate to the ‘You’ tab to create
custom reminder intervals and the ‘Settings’
tab to enable push notications.
www.imovr.com/lander-app
1
2
3
4
Preserve the Elegant Appearance of Your New Sit-Stand Desk with Comprehensive Cable Management
MORE CONTROLLER OPTIONS
Initialization:
1. Lower desk to its lowest limit. Release paddle. Hold paddle
down for 5 seconds. Release.
Factory Reset:
1. Press and hold the “Star”and “Bell” buttons together for
8 seconds.
2. When the controller ashes red 3 times, the factory reset
is complete.
3. Once you have performed a Factory Reset, you must
reinitialize your desk. (See initialization instructions
above)
Switch to Metric (cm):
1. Press and hold the “Star”and “Bluetooth” buttons together
for 5 seconds. The current measurement unit blinks.
2. Tilt the controller once to change units.
3. Press any button to conrm your choice.
Note: Make sure not to inadvertently tilt the
controller during these steps.
PROGRAMMING YOUR CONTROLLER
Height Calibration:
1. Press and hold the “Bell” and “Bluetooth” buttons
together for 5 seconds. The height in the display will
begin to blink.
2. Tilt the controller up or down until the display shows the
correct height measurement. (The desk will not move,
only the display will change.)
3. Press any button to conrm your choice.
8

9
FINAL TOUCHES
LEVEL YOUR LANDER LITE
If your desk is on an uneven surface, adjust the leveling pads
on the bottom of your desk’s feet. Use a level on the tabletop
to make sure the desk is perfectly even with the oor.
1. Twist the leveling pads counterclockwise to raise the desk
height, or clockwise to lower.
2. Adjust each leveling pad until the tabletop is perfectly
even with the oor.
By leveling your desk you can eliminate unwanted wobble
from your workstation!
ANTIFATIGUE STANDING MATS
Stand comfortably for hours with Ecolast Standing Mats
Extra-thick, plush, and remarkably durable, EcoLast
premium mats make standing time y. Our wide
assortment of sizes and colors can t with any workspace
and decor. And unlike cheaply-made department store
comfort mats, EcoLast standing mats are rmer, provide
more support, and can stand up to microbial and heat
exposure.
Available at:
www.imovr.com/standing-mats.html
Leveling Pad
Tired of messy tangled wires exposed on and under your desk? iMovR
Tucker professional cable management kits are designed to provide simple
yet comprehensive solutions for any workstation conguration. Select
from our pre-arranged kits or build your own system with our premium
individual components.
The Tucker Basic Cable Management Kit is designed to be easily installed
and comes standard with reusable and adjustable components to give
you maximum exibility and peace of mind. Every cable gets neatly routed
together in a bundle under your desk and tracks down the back of the leg
for a discreet and professional aesthetic.
The Tucker Advanced Cable Management Kit is for desks ranging from a
simple setup to those with multiple routing needs, this kit bundles and
guides all of your cables together to eliminate snagging and damage to
equipment while providing under desk power and additional cable storage.
The Tucker™ Pro Cable Management Kit for Adjustable Desks features
a height-tracking link chain with a full array of mounting and routing
essentials for device and cable protection, including a 6-outlet, under-desk
surge protector and capacious cable tray.
Preserve the Elegant Appearance of Your New Sit-Stand Desk with Comprehensive Cable Management

TROUBLESHOOTING
Symptom Handling
Legs only move down and don’t move up. Initialize your desk (see instructions on p. 7 ‘More Controller Options’).
Please contact your supplier.
Bluetooth app will not connect.
Re-download app.
Restart mobile device.
Ensure Bluetooth button on controller is activated.
One leg moves while the other does not.
Check the drive cable connection.
Check to see if legs are perpendicular (at 90 degrees) to the desktop and the
oor. If the legs are splayed inward or outward, the motor will not operate at an
optimum level.
Please contact your supplier.
The legs rise slowly.
Check to see if legs are perpendicular (at 90 degrees) to the desktop and the
oor. If the legs are splayed inward or outward, the motor will not operate at an
optimum level.
Check that the weight load on the tabletop is not excessive.
Table slides down on its own. Check that the weight load on the tabletop is not excessive.
Please contact your supplier.
10
MONITOR ARMS
Eliminate neck strain with an iMovR monitor arm
Highly adjustable with smooth movement, sleek looks, and
high-grade componentry, iMovR’s monitor arms are more than
an ergonomic add-on, they’re an integral part of your active
workstation. Choose from light and heavy-duty single monitor
arms, or a highly congurable dual monitor solution.
Available at:
www.imovr.com/accessories/monitor-arms.html
ERGONOMIC KEYBOARD TRAYS
Improve your typing speed, comfort, and accuracy
Your Lander Lite’s tabletop is pre-drilled for use with the
iMovR Trackless Keyboard Tray. An essential part of an
ergonomically-sound workstation, it oers up to 15 degrees of
tilt for a strain-free typing experience. When you’re not using
it, simply stow it under your desk to free up space.
Available at:
www.imovr.com/trackless-keyboard-tray.html
Want to learn more about our full line of products? Contact
our workplace wellness specialists at [email protected].
FITTING OUT YOUR WORKSTATION

Symptom Handling
Legs only move down and don’t move up. Initialize your desk (see instructions on p. 7 ‘More Controller Options’).
Please contact your supplier.
Bluetooth app will not connect.
Re-download app.
Restart mobile device.
Ensure Bluetooth button on controller is activated.
One leg moves while the other does not.
Check the drive cable connection.
Check to see if legs are perpendicular (at 90 degrees) to the desktop and the
oor. If the legs are splayed inward or outward, the motor will not operate at an
optimum level.
Please contact your supplier.
The legs rise slowly.
Check to see if legs are perpendicular (at 90 degrees) to the desktop and the
oor. If the legs are splayed inward or outward, the motor will not operate at an
optimum level.
Check that the weight load on the tabletop is not excessive.
Table slides down on its own. Check that the weight load on the tabletop is not excessive.
Please contact your supplier.
CLEANING THE BASE
Clean the base frame by wiping it down with a microber
cloth moistened with a standard household cleaning
solution. Never use solvents or abrasive or corrosive
compounds on the frame. The base should be cleaned
at regular intervals to remove dust and dirt. Inspect for
mechanical damage; worn or broken parts should be
replaced.
CLEANING THE DESKTOP
iMovR desktops can stand up to most cleaning solutions
without risk of discoloration or degradation. Anti-bacterial
solutions may be used. Always test new cleaning solutions
on a less-seen surface before rst using on the entire
desktop.
EXTENDED NONUSE
Unplug the power cord if you do not intend to use the desk
for a long period of time.
PREVENTATIVE MAINTENANCE, CLEANING,
WARNINGS AND GOOD-SENSE TIPS
SPECIFICATIONS
11
WARNING
The components used are quite
heavy and care should be exercised
when lifting and moving the base
and desk both during assembly
and during use.
Rated Lifting Capacity: 225 lbs.
Height Range:
Single Stage: 27.35” - 47.5” including top, leveling feet fully closed,
additional 0.5” height adjustment with leveling feet opened
Dual Stage XT: 24”- 50” including top, leveling feet fully closed,
additional 0.5” height adjustment with leveling feet opened;
optional 6” height extenders available
Average Travel Speed: 1.6” per second
Controller Type: Bluetooth-enabled LED Touch Paddle
Special Features: Anti-Collision Technology
Tabletop Construction: MDF with Ergo-contoured 3D Lamination
or Natual Solid Wood
Tabletop Thickness: .75”
Available Sizes:
Depth: 30” (3D Lamination) or 28” (Natural Solid Wood)
Width: 41”, 47”, 53”, 59”, 65”, 71”
Tabletop Finishes:
Solids
Designer White
Racing Red
Shark Gray
Fashion Gray
Black
Woodgrains
Light Maple
Almond Cherry
Hayward Cherry
Shaker Cherry
Clove Mahogany
Bella Walnut
Obsidian Oak
Specialty
Carbon Fibers
Fiber Concrete
Corten Metal
+36 Natural Solid Wood Tabletops
Soft-Touch Matte Luxe
Luxe Cadet
Luxe Sage
Reclaimed Wood
Reclaimed Pine Cabin
Reclaimed Warehouse Oak
Reclaimed Victorian Gray

WARRANTY
IMovR Contact Information:
Phone: [phone]
or [phone]
Fax: [phone]
E-mail: customercar[email protected]
Live Chat: www.iMovR.com
Hours: See iMovR.com/hours
VERSION 11.08.21 IMOVR LANDER LITE INSTALLATION MANUAL DOC-LNIC-1
iMovR warranty coverage includes a lifetime warranty on the steel frame, 10 years on the motors and electronics, and 5 years on the desktop.
THIS WARRANTY only covers defects as specied herein and does not include defects or damages attributable to improper installation, misuse or
normal surface weathering, or defects or damages caused by accidents or re or other casualty or Acts of God, or any other causes, or occurrences
beyond the manufacturer’s control. The exclusive remedial action provided for the customer hereunder shall be repair, restoration or replacement of
the components as are found to be defective.
TABLE TOP: The replacement of new materials for those as may result in a color variance in comparison to the originally installed laminates due to
slight color or texture changes by laminate manufacturers and is not indicative of a defect. IMovR reserves the right to substitute such laminates as are
then being manufactured and is only obligated to match color and quality with such products as its manufacturing at the time of replacement.
ELECTRIC BASE FRAME: New base frames may have paint defects or scratches on components that are hidden beneath the surface of the desk,
which are normal. Painted components that are normally visible to sitting or standing users after installation of the table top, that arrive in damaged
condition, will be replaced under this warranty if iMovR is notied before the component is installed.
THIS WARRANTY is limited to repair, restoration and/or replacement by iMovR of any defective unit provided the manufacturer: (a) receives a written,
faxed or e-mailed notice of claim under this warranty, including suciently high resolution photographs that clearly show the nature of the damage,
and (b) within 30 days after notice of claim, is in receipt of the defective unit at its place of business, unless this requirement is waived by iMovR. The
manufacturer will arrange for retrieval of the defective product via its carrier-of-choice. In some cases the manufacturer may elect not to retrieve the
defective component, and may opt to send a replacement product based only on photographic evidence of warrantied defects. If upon receipt and
inspection of the returned component it is determined that the damage was not due to a manufacturing aw but rather one of the exempted reasons
stated above, the costs of shipping the units to and from the manufacturer, plus the cost of the replacement component, shall be charged back to the
customer.
LIMITATION OF LIABILITY: IT IS UNDERSTOOD AND AGREED THAT MANUFACTURER’S LIABILITY, WHETHER IN CONTRACT, IN TORT UNDER ANY
WARRANTY, IN NEGLIGENCE OR OTHERWISE, SHALL NOT EXCEED THE RETURN OF THE AMOUNT OF PURCHASE PRICE FOR THE DEFECTIVE ITEM PAID
BY PURCHASER AND UNDER NO CIRCUMSTANCES SHALL SELLER BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES. NO ACTION,
REGARDLESS OF FORM, ARISING OUT OF THE TRANSACTIONS UNDER THIS AGREEMENT MAY BE BROUGHT BY THE PURCHASER MORE THAN ONE YEAR
AFTER THE CAUSE OF THE ACTION HAS ACCRUED.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, AND SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS HEREIN MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY, FROM STATE TO STATE. THIS WARRANTY
APPLIES ONLY IN THE U.S. AND CANADA. WARRANTIES OUTSIDE OF THE UNITED STATES MAY VARY. PLEASE CONTACT YOUR LOCAL DEALER FOR
DETAILS.
TO OBTAIN warranty repair please contact the iMovR Customer Care Department with the contact information provided below.