Furniture of America CM3441CN User manual

16-06-24
16-07-07
(Note Included)
Screwdriver
Page 1 of 7
CM3441CN

Page 2 of 7

Parts
Page 3 of 7

Hardware List
Quantity
Contains adhesive
Contains adhesive
Page 4 of 7

Insert the wood dowels (#A) into the
holes along each end of part (#4).
1. Align part (#2) to the
holes along the base (#1).
2. Insert the locks (#F) into (#1), make sure
the hole faces up towards the opening.
Insert the bolts (#C) into (#2) and secure
using the Allen wrench (#G).
2. Insert (A)
into bot-
tom holes.
3. Insert the top corner of the glass into the top hole. As you
insert, slide the glass into the part (A) along the bottom.
4. Secure using
a screwdriver.
1. Insert the pins (C)
into each hole.
For door
installation on
the right side:
5. Place an
adhesive (F)
onto the
indicated cor-
ners, then
apply part
(E) onto them.
4. Place the adhesive
metals (D).
1. Place the adhesive metal (D) onto the
corners, then apply (B) onto the metal.
2. Secure using
a screwdriver.
Note: Round edge
toward the front.
Page 5 of 7

Align (#3) to the holes
along part (#3) to the
base (#1), then insert
the bolts (#B). Secure
using the Allen wrench.
Align part (#5) to the
bases (#1), then insert
the locks (#F) along
the sides and the
bolts (#B). Secure.
Align part (#4) to parts (#3),
insert the bolt (#E) at a
diagonal and secure.
Page 6 of 7
For door installation on the left side, mirror steps 1 and 2:
Note: Round edge
towards the front.
For door installation on the left side, mirror steps 1 and 2:

1. Carefully place the sofa face down.
2. Remove wooden block from all four corners.
Align the legs to each corner. Make sure to have
about a quarter of an inch each side of the corner.
Page 7 of 7
Adjust as needed.
Level the wine cabinet as needed,
then break off the end.
ASSEMBLY IS COMPLETED