InCharged Powermethod User manual

powermethod
x2
POWER BOX UNIT
x
1
TOP PLATE
x
1
BASEPLATE
x
1
STAND
x
1
GRAPHIC PANEL
x
1
MOUNTING BRACKET
x
12
THUMBSCREW
x2
POWER CORD
powermethod
CONTENTS
120V 15A OUTLET
REQUIRED

SETUP instructions
[phone]
01
Fasten four thumbscrews
halfway into bottom
of stand.
02
Align four keyholes on
baseplate to thumbscrews
on bottom stand. Ensure
matching orientation of
cutouts in stand and base.
03
Slide into locked position
and tighten thumbscrews.
Pull power cord through
hole in center of
baseplate.
04
Flip stand right-side up
ensuring power cord exits
through cutout in base.
05
Use two thumbscrews to
attach bracket to top
plate. Ensure power cords
are placed in center
cutout of bracket.
06
While holding the top
plate above the stand,
plug both power cords
into outlets inside stand.
powermethod
07
Place top plate on stand
ensuring bracket and tabs
are seated inside and
cables exit through slot in
back of stand.
09
Align four keyholes on
baseplate to thumbscrews
on bottom stand. Ensure
matching orientation of
cutouts in stand and base.
08
Use two thumbscrews to
secure the top plate to the
front of the stand and two
thumbscrews for the back
of the stand.

RETURN
LEVEL 1 LEVEL 2
Remove ALL
thumbscrews
before packing.
[e-mail]
powermethod
02
RETURN THE DAY AFTER
YOUR EVENT VIA
01 ACCESSORIES
TOP PLATE
04
03
06
WARNING
05
BASEPLATE
DIVIDER
STAND
GRAPHIC
PLATE