Indian Creek Design BushMaster 2000 User manual

The Legend Lives Again!

Introducing the BushMaster 2000 from Indian Creek Design, Inc.

The BushMaster 2000 is controlled by a small computer, housed in the

frame of the 45 grip. The computer interface allows us to do anything

we want, therefore allowing you the player to get the performance you

need to be MORE than competitive.

"What can it do?"

The BushMaster 2000 comes standard with the most capabilities at the

flick of a switch. (inside the grip) Go from semi-auto (single shot), 3

shot or 6 shot burst. It even does FULL-AUTO!. There are four

separate modes to choose from. Each of the 3, 6, or full-auto modes

stops when the trigger is released, allowing single shot firing in any

mode. The on board R.O.F. is programmable through dip-switch

configurations laid out in the manual. No variable pots to keep you

guessing. Rate selection will give you 4 - 13 cycles per second. All of

this in a very affordable package will keep you at the top of the

technological totem pole.

All of this powered by a single 9 volt battery and your compressed air

system, what else could you ask for?

"Where can I get it?"

Not K-Mart or Walmart...

Contact your local store and tell them what you want. For further

information contact Indian Creek Design, Inc.

Indian Creek Design Inc. Offers a full range of progressive technologies

like no other manufacturer today. With the addition of electronic

BushMaster 2000, we have combined computer technology with

legendary performance.

BushMaster 2000●

ICD Paintball - Bushmaster 2000

http://www.icdpaintball.com/prod-bush2000.htm (1 of 2) [9/12/2000 2:10:10 PM]

Go to...

Overview● 
Standard Features● 
Operation● 
Installing the 9 volt Power Source● 
CO2, Nitrogen or Compressed Air Usage● 
Loader Usage● 
Switch Settings - Modes - Rate of Fire● 
Tuning Guide● 
Close Up Picture● 
Warranty● 
Price Sheet (MSRP)● 
Product Comparison Sheet● 
ICD Email Information
General Information:
Sales/Reseller Info:
Support:
[email protected]
[email protected]
[email protected]
Web Page Additions and Changes
please E-mail [email protected]
© 1997 Indian Creek Design
 Site Design Site Concepts - Web Hosting Web Ahead 
ICD Paintball - Bushmaster 2000
http://www.icdpaintball.com/prod-bush2000.htm (2 of 2) [9/12/2000 2:10:10 PM]

Overview

The BushMaster2000 is a quality marking instrument specially designed

to meet the needs of the professional style tournament player. The

BushMaster 2000 is a electronic solenoid actuated computer controlled

marking device. The major components of the BushMaster 2000 are

machined from solid, aircraft-grade aluminum, then hard anodized per

military specifications. No Castings are used in the construction of the

BushMaster 2000, thereby providing the end user with a high-quality,

precision-engineered marking instrument.

Paintball markers get a lot of abuse. Indian Creek Design Inc. has built

the BushMaster 2000 with this in mind. All internal parts, wear and

contact surfaces have been heat treated or hard anodized. The toughest

and most resilient materials and components have been used in the

design of this instrument.

The BushMaster 2000 uses a single standard 9 volt battery for operation.

The circuitry is a micro-processor based digital controller.

The BushMaster 2000 does not need tools in order to field strip it.

Removing the field-strip link-pin of the bolt enables the removal of the

entire bolt assembly.

The BushMaster 2000 offers "low-pressure" operation. The main

operating pressure is 225-275 PSI nominally adjusted to visually via the

gauge on the primary regulator. The secondary pressure is factory

pre-set and regulated to 85-95 PSI. Gas usage is controlled through

these 2 internal regulators. The unique feature of this gun is the

regulator adjustment. This allows precise adjustment for the velocity

control of the gun and optimal gas efficiency.

The BushMaster 2000 comes with a removable barrel system. This

feature allows the user to select a barrel that is most suitable for the

playing conditions. All barrels are mirror-honed with a muzzle break,

step-bore and spiral porting and stock length is 12".

ICD Paintball - Bushmaster 2000 OVERVIEW

http://www.icdpaintball.com/prod-bush2000-OVERVIEW.htm (1 of 2) [9/12/2000 2:10:21 PM]

Go to...

BushMaster 2000● 
Overview● 
Standard Features● 
Operation● 
Installing the 9 volt Power Source● 
CO2, Nitrogen or Compressed Air Usage● 
Loader Usage● 
Switch Settings - Modes - Rate of Fire● 
Tuning Guide● 
Close Up Picture● 
Warranty● 
Price Sheet (MSRP)● 
Product Comparison Sheet● 
ICD Email Information
General Information:
Sales/Reseller Info:
Support:
[email protected]
[email protected]
[email protected]
Web Page Additions and Changes
please E-mail [email protected]
© 1997 Indian Creek Design
 Site Design Site Concepts - Web Hosting Web Ahead 
ICD Paintball - Bushmaster 2000 OVERVIEW
http://www.icdpaintball.com/prod-bush2000-OVERVIEW.htm (2 of 2) [9/12/2000 2:10:21 PM]

Standard Features

Quick-field strip bolt●

Vertical feed●

Machined solid, aircraft grade aluminum●

Hard anodized - (no casings)●

Low-pressure operation (225-275 psi)●

2 internal regulators●

Viewable pressure gauge●

Precise velocity control●

Lightweight (2 lbs. 10 oz)●

Microprocessor based digital controller●

4 firing modes (including full auto)●

Removable barrel system●

12" spiral ported muzzle-break step barrel●

"Ease of maintenance" design●

Modular construction●

Double-finger trigger●

Fore-grip●

BushMaster 2000●

Overview●

Standard Features●

Operation●

Installing the 9 volt Power Source●

ICD Paintball - Bushmaster 2000 - Standard Features

http://www.icdpaintball.com/prod-bush2000-features.htm (1 of 2) [9/12/2000 2:10:43 PM]

Go to...

CO2, Nitrogen or Compressed Air Usage● 
Loader Usage● 
Switch Settings - Modes - Rate of Fire● 
Tuning Guide● 
Close Up Picture● 
Warranty● 
Price Sheet (MSRP)● 
Product Comparison Sheet● 
 
Web Page Additions and Changes
please E-mail [email protected]
© 1997 Indian Creek Design
 Site Design Site Concepts - Web Hosting Web Ahead 
ICD Paintball - Bushmaster 2000 - Standard Features
http://www.icdpaintball.com/prod-bush2000-features.htm (2 of 2) [9/12/2000 2:10:43 PM]

 
Operation
Read the entire owners manual before you prepare your BushMaster
2000 for firing.  Safety and safe gun handling are the most important
aspects of paintball sports.  Please practice each of the following steps
with an unloaded gun before attempting to charge your gun with
compressed air and paint pellets.  Do not load compressed air and paint
pellets into your BushMaster 2000 until you feel completely confident
with your ability to handle your BushMaster 2000 safely.
Keep your finger out of the trigger guard and away from the trigger;
point the muzzle of the gun in a safe direction at all times.  Keep the gun
turned off until ready to operate.   The BushMaster 2000 does not have a
mechanical safety, only an on-off switch!  Always keep your
BushMaster 2000 pointed in a safe direction. Always use a barrel plug.
BushMaster 2000● 
Overview● 
Standard Features● 
Operation● 
Installing the 9 volt Power Source● 
CO2, Nitrogen or Compressed Air Usage● 
Loader Usage● 
Switch Settings - Modes - Rate of Fire● 
Tuning Guide● 
Close Up Picture● 
Warranty● 
Price Sheet (MSRP)● 
Product Comparison Sheet● 
ICD Paintball - Bushmaster 2000 OPERATION
http://www.icdpaintball.com/prod-bush2000-OPERATION.htm (1 of 2) [9/12/2000 2:10:48 PM]
Go to...

ICD Email Information

General Information:

Sales/Reseller Info:

Support:

[email protected]

Web Page Additions and Changes

please E-mail [email protected]

Site Design Site Concepts - Web Hosting Web Ahead

ICD Paintball - Bushmaster 2000 OPERATION

http://www.icdpaintball.com/prod-bush2000-OPERATION.htm (2 of 2) [9/12/2000 2:10:48 PM]

Installing the 9 volt Power Source

The BushMaster 2000 requires a single 9 volt batter supply as the

electronic Power source. The use of long life batteries is recommended.

The 9-volt batter is located in the frame (or "tray") above the trigger and

the on-off switch. Before removing the tray, remove the grip frame side

panel on the left side exposing the CPU and configuration switches.

Note the blue wires looped down into the PCB cavity. This loop is to

allow the necessary distance between the tray and the upper body to

change the battery. This loop must be maintained when re-assembly is

completed. To remove the tray use a 7/64 Allen wrench and remove the

four 6-32x1" screws around the bottom of the "tray". Gently separate

the upper section from the lower section, being careful not to put stress

on the wiring harness (blue looped wires)connected to the solenoid

valve on the upper section. Place the battery into the terminal connector

and with the wires in the down-ward direction place the battery and

terminal into the tray, sliding them ALL the way toward the front of the

tray. Place the tray and upper body together being careful not pinch any

wires in the body, bring the blue wire loop back to its original position.

Turn the main on-off switch to the on position and be sure the LED

lights up, then turn it off. Replace the four 6-32x1" screws and the grip

panel.

BushMaster 2000●

Overview●

Standard Features●

Operation●

Installing the 9 volt Power Source●

CO2, Nitrogen or Compressed Air Usage●

Loader Usage●

Switch Settings - Modes - Rate of Fire●

ICD Paintball - Bushmaster 2000 Installing 9 Volt

http://www.icdpaintball.com/prod-bush2000-9volt.htm (1 of 2) [9/12/2000 2:10:56 PM]

Go to...

Tuning Guide● 
Close Up Picture● 
Warranty● 
Price Sheet (MSRP)● 
Product Comparison Sheet● 
ICD Email Information
General Information:
Sales/Reseller Info:
Support:
[email protected]
[email protected]
[email protected]
Web Page Additions and Changes
please E-mail [email protected]
© 1997 Indian Creek Design
 Site Design Site Concepts - Web Hosting Web Ahead 
ICD Paintball - Bushmaster 2000 Installing 9 Volt
http://www.icdpaintball.com/prod-bush2000-9volt.htm (2 of 2) [9/12/2000 2:10:56 PM]