Individual Computers Indivision ECS How to use

Indivision ECS short manual
Dear customer,
thank you for purchasing a product from Individual Computers. We're sure that your new
flickerfixer will satisfy all your needs. However, we would like to emphasi e that installing
the product in an Amiga is very complicated. The required steps require a lot of experience
and skills. Please read this manual throughly to ascertain if you can perform the
installation process. If you have any doubts regarding installation, please seek help from
an expert. Your reseller will be glad to help you.
Please read this guide carefully before commencing installation. Ensure you take suitable
anti-static precautions. Serious damage may result from failure to accurately follow this
guide. Both Individual Computers and your authorised reseller cannot be held responsible
for incorrect installation of this product, including bent/broken pins, damaged motherboard
or damage to the Indivision ECS unit itself.
A PDF-version of this short manual is available on our homepage www.icomp.de, and you
reseller's homepage. This online version of this manual contains high-resolution colour
pictures. The oom-function of a PDF reader will give you a lot more detail in the pictures
of this manual.
Step 1: Open the computer and locate the Denise-chip
Open the computer and remove everything that may cover the Denise-chip, such as Zorro-
cards or the RF-shield. The following pictures show the most common Amiga models:
Amiga 500 Amiga 2000
Amiga 3000 CDTV

For installation in an A3000T, A1000 and A600, additional parts are required that are not
included in the normal Indivision ECS package. If you want to install the flickerfixer in one
of these computers, please download the respective manual from our website
www.icomp.de. Please understand that we cannot cover these extremely rare Amiga
models in this short manual.
Step 2: remove obstacles
Indivision ECS is already trying to avoid as many obstacles as possible in as many Amiga
models as possible. However, a fully universal shape is impossible due to the diversity in
design of Amiga revisions, so a few motherboard revisions require modifications to
accommodate Indivision ECS.
We are not aware of any Amiga 500 or CDTV version that requires modifications. In this
case, you can skip to step 3 of this manual.
In A3000 desktop computers, the rechargeable battery must be removed to make space
for Indivision ECS. This has already been done on many computers, because the batteries
are already years beyond their lifecycle. Leaking batteries are a danger to the whole
computer, so any NiCad cell should be removed from all Amiga computers. We
recommend to use high-quality 3V cells as a replacement.
Removing the battery should be done by an expert (such as a radio- and television
engineer). Breaking away the contacts of the battery could lead to serious damage of the
mainboard and is not recommended.
On A2000 versions 4.1 and 4.3, the electrolytic cap C225 (near the Paula chip) must either
be replaced by a physically smaller type (max. 8.5mm height), or moved to a different
place by using short wires (max. 2 inches). We recommend using a new radial type with
470µF and 16V. Since low-profile capacitors are extremely hard to find, we recommend
using an 8mm diameter type that can be mounted flat (for example Digi-Key part number
P5141-ND). This job should only be done by an expert, for example a radio- and television
engineer. Please take the time to completely remove the board from the case. Removing
the capacitor by force from the top side may damage the mainboard and is not
recommended.
Step 3: installation of Indivision ECS
Carefully remove the Denise chip from it's socket, for example by using a flat screwdriver
as a lever. Ensure to only gently lever one side a few millimeters at a time. The Denise
chip is extremely delicate, and pins easily bend or break away. If a pin is broken off, it
normally cannot be fixed, so you should be extremely careful with this step.
Now insert the chip into the socket of Indivision ECS. The correct orientation is indicated
by the notch in the socket, which must face into the same orientation as the chip's notch.
Carefully insert the flickerfixer into the empty socket of the mainboard. Once again, the
notch indicates the correct orientation. The notch orientation is printed on the mainboard,
but it's mostly covered by the socket itself, so it may not be visible on all board revisions.
The following pictures should provide all necessary information.
It is important to ensure that you do not displace the flickerfixer when you insert it into the
socket. Displacing the unit by one pin can cause maximum damage to both the computer
and the flickerfixer. There is no protection a ainst this possible fault. It's your
responsibility to ensure proper connection between the motherboard and the
flickerfixer before switchin the computer back on.

Please bear in mind that the sockets of Commodore computers are very low-quality.
Frequent insertion/removal cycles may lead to contact problems that can only be solved by
exchanging the socket on the mainboard. Even for an experienced technician, this takes a
fairly long time, so this should be avoided by all means.
Step 4: connect the VGA-cable
Plug the included cable into the black VGA-connector of your Indivision ECS. When
routing the cable through your computer, please ensure that the cable cannot be damaged
upon re-assembly of the computer. For best picture quality, the 15-pin VGA connector
should be mounted on a grounded metal part.
We recommend the use of the included grounding cable, especially on A500 and A2000
computers. As you can see in the pictures above, there are motherboard screws near the
Denise-socket that can be used for an additional ground connection. On CDTV and A3000
compters (including towers), the ground connection is already sufficient, because these
computers have multilayer mainboards. For the A3000D, there's even the danger of a
short to a nearby jumper, so use of the ground cable is not recommended for the A3000D.
If you decide not to use the ground cable, please remove it completely from the computer.
Don't leave it in the computer unconnected, as it may short out and damage other
components.
If you want to install a second Indivision ECS, please download the corresponding manual
from our website www.icomp.de. For using a single Indivision ECS, the jumper should be
left at the factory default setting (middle-left). The jumper setting (primary or secondary) is
displayed in the bottom right of the power-up screen.
Amiga 500 Amiga 2000
Amiga 3000 desktop CDTV