INDIWORK BZL-ECS06-NTG4 User manual

High Quality and Advanced Technology
MODEL : BZL-ECS06-NTG4
(Square 10-pin LVDS Type)
BENZ E,C,S CLASS LVDS TYPE PIP VIEW (2006~ )
Instruction Manual
www. .co.kr

-2-
Components
BZL-ECS06-NTG4
Rear IN Cable
Power&CAN Cable LVDS Cable Multi Power Output

-3-
Connector Pin Specication
A
11
1
7 12 NAVI HDMI LVDS VIDEO
6
5
6
B C D E
CAN1: OEM Button
CAN2: GEAR
* Pin #3 ‘12V-OUT’ of B-connector can be selected to power output according to ACC, rear camera power, and input
video, and functions are set in the OSD.
A: POWER, CAN1
1. VCC (Red)
2. GND (Black)
3. CAN1-H (Orange)
4. CAN2-L (Brown)
5. REVERSE/AVM (Blue)
(Do not connect when
using CAN2)
6. MMI (Not used)
1. NC
2. NC
3. 12V-OUT (Yellow)
4. CAN2-H (Purple)
5. CAN2-L (Gray)
11. Video Ground
12. Camera Video Input
B: CAN2,12V OUT C: REAR CAMERA D: NAVI HDMI IN

-4-
DIP Switch Settings
BENZ S-CLASS (2006 ~ 2009) Europe
BENZ S-CLASS (2006 ~ 2009) Japan
BENZ E-CLASS (2009 ~ 2011)
BENZ S-CLASS (2008 ~ 2011)
ON: OFF:

-5-
CAN Connection (S-CLASS)
CAN1 H: Black/White
CAN1 L: Black
CAN2 H: Yellow/White
CAN2 L: Yellow
CAN1 Connection:
Connector behind monitor.
CAN2 Connection:
Connector behind deck.

-6-
LVDS Connection (C-CLASS)
LVDS IN LVDS OUT
Taping after connecting the Y connector to LVDS of the original monitor.

-7-
LVDS Connection (E-CLASS)
LVDS IN LVDS OUT
Taping after connecting the Y connector to LVDS of the original monitor.

-8-
LVDS Connection (S-CLASS)
LVDS IN LVDS OUT
Taping after connecting the Y connector to LVDS of the original monitor.

-9-
Activation by original buttons (E,C-CLASS)
* When the ‘PIP Display’ is ‘Yes’. (Default)
(OSD Set -> PIP Display Menu)
* When the ‘PIP Display’ is ‘No’.
(OSD Set -> PIP Display Menu)
<CLR> Button :
Short press : PIP ON/OFF
Long press after PIP displayed. : Videos 1:1 change.
<BACK> Button :
Long press : Switch screen to Android.
Short press : Switch screen to OEM Original Mode.
<CLR / BACK> Long press together :
PIP Position
* Set the camera view type when the front camera or omni-view is
active.
<CLR> Button :
Switch screen to OEM Original Mode.
<BACK> Button :
Long press : Switch screen to Android.
Short press : Switch screen to OEM Original Mode.

-10-
Activation by original buttons (S-CLASS)
* When the ‘PIP Display’ is ‘Yes’. (Default)
(OSD Set -> PIP Display Menu)
* When the ‘PIP Display’ is ‘No’.
(OSD Set -> PIP Display Menu)
<DISC/RADIO> Button :
Long press : PIP ON/OFF
Short press : When PIP is off, switch screen to full OEM Mode.
<BACK> Button :
Long press : PIP position set.
Short press : When PIP is off, switch screen to full OEM Mode.
<SEAT> Button :
When PIP is off, switch screen to full OEM Mode.
<TEL/NAV> Button :
Switch screen to Android.
<DISC/RADIO>,<BACK>,<SEAT> Button :
Switch screen to OEM Original Mode.
<TEL/NAV> Button :
Switch screen to Android.

-11-
OSD Setting (Easy Menu)
Easy Menu Selection Select the Navigation
(Android Settop)
Default: NO * If use the PGS with an external camera,
an additional PGS adapter is required.

-12-
OSD Setting (Basic Menu)
Basic Menu Selection Set the input source to be used, whether to use it,
and the rear camera.
Set original screen - Not normally used.
Not used
Mirroring adapter required
12V output voltage setting of interface C connector #3.
-All Rear Event: 12V Output when reverse gear - Power for external rear camera.
-All OEM Source: 0V in OEM screen/12V in external screen - Touch control power
available
-Original,Navigation,Smarphone, AV1,AV2: 12V output only in the selected source.
-ACC: ACC output if connect B+ power to the interface - Used Navigation.

-13-
OSD Setting (Basic Menu)
Set Navigation - Not normally used. PIP -On/Off, and position setting.
Video color adjustmentOEM/Navigation color adjustment

Copyright ⓒ INDIWORK. All Rights Reserved.
.co.krwww.