Industrial Scientific MX6 iBrid User manual

MX6 iBridTM Personal Multigas Monitor
Quick-start Menu
Flowcharts
Part Number: 17134552-1
Revision: 3; June 17, 2015
Operation-mode Menu System
Note: These flowcharts are supplemental to the MX6 iBridTM manual
(part number 17130279) and are not intended to be used as a
replacement for the information contained in the manual.
View
Sensor
Data
Display ►
Numeric
Text
Graphical
Rotate
Battery
Profile
Help ►
Contact
About
Configurea
aWarning: only qualified personnel should
access and work in the configuration mode.
Zero All
Calibration
Bump Test
Peaks
Sensors
►
Sensor 1b
Sensor 2b
Sensor 3b
Sensor 4b
Sensor 5b
Sensor 6b
Location
bAccess these tasks, information screens, or
settings for an individual sensor: zero,
calibration, or bump testing; most recent (or
next) calibration date and span trends; for a PID
or LEL sensor, edit the unit of measure, RF
(PID), or correlation factor (LEL).
New Session
View Data ►
Readings Graph
TWA Graph
TWA Numeric
STEL Graph
STEL Numeric
Event Log
Memory Status
Comments
Users/Sites►
Set Current User
Set Current Site
Buttons
Diagram Key
Any button
Activate the backlight.
Note: Access to
individual options
varies based on a
unit’s configured
settings.
Begin task
Access settings
Edit setting
View information
Start a task. Confirm or cancel an action. Change
an item’s status (for example, from on to off).
▲or ▼
Navigate among menu items or items on a display
screen. Enter text or values in a data field.
◄or ►
Navigate from menu to menu or among items on a
display screen. Use as a cursor within a data field.

Industrial Scientific Corporation
1 Life Way; Pittsburgh, PA 15205-7500; USA
Phone: [phone]; 1-800-DETECTS (338-3287)
www.indsci.com; [e-mail]
Configuration-mode Menu System
Warning: only qualified personnel should
access and work in the configuration mode.
Config
Sensor
Data
Admin ►
Password
Clock
Language
Company
Backlight
Defaults
Alarms ►
Audio
Visual
Vibrate
Latch
While Docked
Allow Shutdown
Confidence ►
Display ►
Time
Temp
Both (time and temp)
PID Factor
LEL Factor
Both (both factors)
Start-up ►
User
Company
Cal Date ►
Zero
Self-test
Bump
Profiles ►
Set
Save ►
Delete
Sensors ►
Sensor 1c
Sensor 2c
Sensor 3c
Sensor 4c
Sensor 5c
Sensor 6c
Options ►
Field Zerod
Field Cald
Field Bumpd
Field Peaksd
Cal Datee►
Cal Overduee
Bump Overduee
Bump Levele
RF List ►
Favorite
Custom
Location
cEnable or disable a sensor. Set alarm values (high, low, and
STEL) and the TWA time base. Set calibration gas values and
properties.
dPress to enable or disable the feature.
e Choose the display preference: date of the next or last (most
recent) calibration. Determine unit behavior when a calibration
is overdue: automatic shutdown, continued operation, or
continued operation with "cal overdue" user notification. Adjust
the bump test criteria.
Options ►
Overwrite
Interval
Field View
View Events
Mode
Clear
Users ►
Set Current
Add
Delete
Field Change
Sites ►
Set Current
Add
Delete
Field Change