Ingersoll-Rand P260WIR User manual

OPERATION and MAINTENANCE
MANUAL
COMPRESSOR MODEL
P260WIR
Code: A
This manual contains important safety information.
Do not destroy this manual.
This manual must be available to the personnel who operate and maintain this machine.
Portable Power Division
P.O. Box 868 - 501 Sanford Ave
Mocksville, N.C. 27028
Book 22442545 (04/04)
Revised (10-12)
Doosan purchased Bobcat Company from Ingersoll-Rand Company in
2007. Any reference to Ingersoll-Rand Company or use of trademarks,
service marks, logos, or other proprietary identifying marks belonging
to Ingersoll-Rand Company in this manual is historical or nominative
in nature, and is not meant to suggest a current affiliation between
Ingersoll-Rand Company and Doosan Company or the products of
either.

2
QUALITY POLICY
We will supply products and services that consistently meet the require-
ments of our customers and each other.
CALIFORNIA
Proposition 65 Warning
Diesel engine exhaust and some of its constituents are known to the
State of California to cause cancer, birth defects, and other reproduc-
tive harm.

1 - 1
TABLE OF CONTENTS
TITLE PAGE
SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-15
General Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-18
WARRANTY REGISTRATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-19
Complete Machine Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-19
NOISE EMISSION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-29
Noise Emission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-30
This section pertains only to machines distributed within the United States. . . . . . . . . . . . . . . . . . . 3-30
Noise Emission Control Maintenance Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-31
Noise Emission Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-31
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-31
GENERAL DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-35
General Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-36
Model: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-36
Rated Delivery: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-36
Engine (Diesel):. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-36
COMPRESSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-36
FLUID CAPACITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-36
RUNNING GEAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-36
UNITS MEASUREMENTS WEIGHTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-37
EXPENDABLE SERVICE PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-37
SECTION 5- OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-39
BEFORE TOWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-40

1 - 2
TABLE OF CONTENTS
TITLE PAGE
MAINTENANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-47
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-48
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-48
Scheduled Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-48
Compressor Oil Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-48
Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-49
Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-49
Fuel Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-49
Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-49
Fasteners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-49
Radiator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-50
Hoses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-50
Compressor Oil Cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-51
Compressor Oil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-51
Receiver-Separator Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-51
Scavenge Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-52
Exterior Finish Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-52
MAINTENANCE SCHEDULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-54
LUBRICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-55
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-56
Portable Compressor Fluid Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-56
TROUBLE SHOOTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-57
Trouble Shooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-58
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-58
Action Plan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-58
Trouble Shooting Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-59
4IR18T ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-65
CONTENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-66
FOREWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-67
Engine Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-70
Engine Label (for EPA) Emission Control Label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-71
Fluid, Lubricants, and Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-72
Water in Fuel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-73
GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-85
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-85
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-85
Fasteners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-85
How To Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-85

3
Section 1 - Safety

Operating & Maintenance Manual Safety
4
Safety
IMPORTANT NOTICE
This machine may have been shipped from
the factory with the drawbar positioned
upright.
To Convert From Shipping Position to
Towing Position
The following tools are required:
Ratchet
13mm socket to fit ratchet
Torque wrench set to 68 foot pounds (9.4 kg-
meters)
16mm socket to fit torque wrench
5 inch extension for torque wrench
Hardware Included:
(4) 12mm bolts with pre-applied thread lock
(2) 8mm Taptite Bolts
(2) Washers
(2) Safety Chains
1. Remove hardware box from compressor
toolbox.
2. Open box and remove the bag containing
hardware, safety chains and assembly
instructions.
3.Using the jack, raise the front of the unit so
that the legs are approximately 1” above the
ground.
4.Remove the temporary retaining bolts from
both sides of the frame at the drawbar
connection (See Figure 1).
5.Carefully lower drawbar to the Level
Position.
6.Install the four bolts (with pre-applied
thread lock) to the four points inside the
enclosure and torque to 68 ft. lbs.(9.4kg-m)
(See Figure 2).
7.Install safety chains by sliding the second
link of one chain into the slot in drawbar
plate. Fasten chain to plate using taptite and
washer. Repeat for the other chain (See
Sketch).

Safety Operating & Maintenance Manual
5
Safety Precautions
General
Ensure that the operator reads and
understands the decals and consults the
manuals before maintenance or operation.
Ensure that the Operation and Maintenance
manual, and manual holder if equipped, are
not removed permanently from the machine.
Ensure that maintenance personnel are
adequately trained, competent and have
read the manuals.
Make sure that all protective covers are in
place and that the canopy/doors are closed
during operation.
The specification of this machine is such that
the machine is not suitable for use in
flammable gas risk areas. If such an
application is required then all local
regulations, codes of practice and site rules
must be observed. To ensure that machine
can operate in a safe and reliable manner,
additional equipment such as gas detection,
exhaustsparkarrestors,andintake(shut-off)
valves may be required, dependent on local
regulations or the degree of risk involved.
Air discharged from this machine may
contain carbon monoxide or other
contaminants which will cause serious injury
or death. Do not breathe this air.
Compressed air can be dangerous if
incorrectly handled. Before doing any work
on the unit, ensure that all pressure is vented
fromthesystem andthatthemachine cannot
be started accidentally.
Ensure that the machine is operating at the
rated pressure and that the rated pressure is
known to all relevant personnel.
All air pressure equipment installed in or
connected to the machine must have safe
working pressure ratings of at least the
machine safety valve rating.
If more than one compressor is connected to
one common downstream plant, effective
check valves and isolation valves must be
fitted and controlled by work procedures, so
that one machine cannot accidentally be
pressurized or over pressurized by another.
Compressed air must not be used for a feed
to any form of breathing apparatus or mask.
The discharged air contains a very small
percentage of compressor lubricating oil and
care should be taken to ensure that
downstream equipment is compatible.
If the discharged air is to be ultimately
released into a confined space, adequate
ventilation must be provided.
When using compressed air, always use
appropriate personal protective equipment.
All pressure containing parts, especially
flexible hoses and their couplings, must be
regularly inspected, be free from defects and
be replaced according to the Manual
instructions.
Avoid bodily contact with compressed air.
The safety valve located in the separator
tank must be checked periodically for correct
operation.
Never operate unit without first observing all
safety warnings and carefully reading the
operation and maintenance manual shipped
from the factory with this machine.
Never operate the engine of this machine
inside a building without adequate
ventilation. Avoid breathing exhaust fumes
whenworkingonornearthemachine.Donot
alter or modify this machine.
A battery contains sulfuric acid and can give
off gases which are corrosive and potentially
explosive. Avoid contact with skin, eyes and
clothing. In case of contact, flush area
immediately with water.
Exercise extreme caution when using
booster battery. To jump battery, connect
ends of one booster cable to the positive (+)
terminal of each battery.

Operating & Maintenance Manual Safety
6
Connect one end of other cable to the
negative (-) terminal of the booster battery
and other end to a ground connection away
from dead battery (to avoid a spark occurring
near any explosive gases that may be
present). After starting unit, always
disconnect cables in reverse order.
Never operate unit without first observing all
safety warnings and carefully reading the
operation and maintenance manual shipped
from the factory with this machine.
A battery contains sulfuric acid and can give
off gases which are corrosive and potentially
explosive. Avoid contact with skin, eyes and
clothing. In case of contact, flush area
immediately with water.
HighPressureAir cancauseseriousinjury or
death. Relieve pressure before removing
filler plugs/caps, fittings or covers.
Air pressure can remain trapped in air supply
line which can result in serious injury or
death. Always carefully vent air supply line at
tool or vent valve before performing any
service.
Thismachineproducesloudnoisewithdoors
open or service valve vented. Extended
exposure to loud noise can cause hearing
loss. Always wear hearing protection when
doors are open or service valve is vented.
Never inspect or service unit without first
disconnecting battery cable(s) to prevent
accidental starting.
Do not remove the pressure cap from a HOT
radiator. Allow radiator to cool down before
removing pressure cap.
Do not use petroleum products (solvents or
fuels) under high pressure as this can
penetrate the skin and result in serious
illness.
Wear eye protection while cleaning unit with
compressed air to prevent debris from
injuring eye(s).
Disconnected air hoses whip and can cause
serious injury or death. Always attach a
safety flow restrictor to each hose at the
sourceofsupplyorbranchlineinaccordance
with OSHA Regulation 29CFR Section
1926.302(b).
Rotating fan blade can cause serious injury.
Do not operate without guard in place.
Use care to avoid contacting hot surfaces
(engine exhaust manifold and piping, air
receiver and air discharge piping, etc.).
Ether is an extremely volatile, highly
flammable gas. USE SPARINGLY! Do NOT
use ETHER if unit has GLOW Plug starting
aid. Engine damage will result.
Never allow the unit to sit stopped with the
pressure in receiver-separator system. As a
precaution, open manual blowdown valve.
Never operate unit with guards, covers or
screens removed. Keep hands, hair,
clothing, tools, blow gun tips, etc. well away
from moving parts.
Make sure wheels, tires and tow bar
connectors are in safe operating condition
and tow bar is properly connected before
towing.
Whenever the machine is stopped, air will
flow back into the compressor system from
devices or systems downstream of the
machine unless the service valve is closed.
Install a check valve at the machine service
valve to prevent reverse flow in the event of
an unexpected shutdown when the service
valve is open. Stop machine to add fuel.

Safety Operating & Maintenance Manual
7
Hazardous Substance Precaution
The following substances are used in the
manufacture of this machine and may be
hazardous to health if used incorrectly.
Avoid ingestion, skin contact and breathing
fumes for the following substances:
Antifreeze, Compressor Oil, Engine
Lubricating Oil, Preservative Grease, Rust
Preventative, Diesel Fuel and Battery
Electrolyte.
:
The following substances may be produced
duringthe operationofthismachine andmay
be hazardous to health:
• Avoid build up of Engine Exhaust
Funes in confined spaces.
• Avoid breathing Exhaust Fumes.
• Avoid breathing Brake Lining Dust
during maintenance.

Operating & Maintenance Manual Safety
8
Look for these signs on machines shipped to international markets outside North America,
which point out potential hazards to the safety of you and others. Read and understand
thoroughly. Heed warnings and follow instructions. If you do not understand, inform your
supervisor.

Safety Operating & Maintenance Manual
9

Operating & Maintenance Manual Safety
10

Safety Operating & Maintenance Manual
11
Look for these signs on machines shipped to markets in North America, which point out
potential hazards to the safety of you and others. Read and understand thoroughly. Heed
warnings and follow instructions. If you do not understand, inform your supervisor.
DANGER
!
DANGER (Red Background) indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING
!
WARNING (Orange Background) indicates a potentially hazardous
situation which, if not avoided, could result in death or serious injury.
CAUTION
!
CAUTION (Yellow Background) indicates a potentially hazardous
situation which, if not avoided, may result in minor or moderate injury.
NOTICE
NOTICE (Blue Background) indicates important set-up, operating or
maintenance information.

Operating & Maintenance Manual Safety
12

Safety Operating & Maintenance Manual
13

Operating & Maintenance Manual Safety
14
Table 1:
FREE SAFETY DECALS
To promote communication of safety warnings on products manufactured by the
Portable Compressor Division in Mocksville, N.C., Safety Decals are available free of
charge. Safety Decals are identified by the decal heading: DANGER, WARNING, or
CAUTION.
Decal part numbers are on the bottom of each decal and are also listed in the
compressor’s parts manual. Submit orders for Safety Decals to the Mocksville Parts
Service Department. The no charge order should contain only Safety Decals. Help
promote safety! Assure that decals are present on the machines. Replace decals that
are not readable.

15
Section 1 - Warranty

Operating & Maintenance Manual Warranty
16
WARRANTY - Ingersoll-Rand, through its distributors, warrants to the initial user that each
portable air compressor manufactured by it, will be free of defects in material and
workmanship for a period of the earlier of twelve (12) months from shipment to or the
accumulation of 2,000 hours of service by the initial user.
Portable compressor airends willbe freeofdefectsin material andworkmanshipfora period
of the earlier of twenty four months from shipment to or the accumulation of 4,000 hours of
service by the initial user. The warranty against defects will include replacement of the
complete airend, provided the original airend is returned assembled and unopened.
Portable Compressor Airend Limited Optional Warranty - The earlier of sixty (60) months
from shipment to or the accumulation of 10,000 hours of service. The optional warranty is
limited to defects in rotors, housings, bearings and gears and is automatically available when
meeting the following conditions:
• The original air end is returned assembled and unopened.
• Continued use of genuine Ingersoll-Rand parts, fluids, oil and filters.
• Maintenance is performed at prescribed intervals.
Oil-Freeairendsarefee-basedandmay requireamaintenanceagreement.Formalenrollment
is required.
Ingersoll-Rand engines will be free of defects in material and workmanship for a period of
the earlier of twenty four months from shipment to or the accumulation of 4,000 hours of
service by the initial user.
Ingersoll-Rand Platinum Drive Train Warranty (Optional) – Platinum drive train (Ingersoll-
Rand Engine and Airend combination) will be free of defects in material and workmanship for
a period of the earlier of sixty (60) months from shipment to, or the accumulation of 10,000
hoursofservice.The starter, alternator, fuelinjectionsystemandallelectricalcomponents are
excluded from the extended warranty. The airend seal and drive coupling are included in the
warranty (airend drive belts are not included). The optional warranty is automatically available
when meeting the following conditions:
The original airend is returned assembled and unopened.
Continued use of genuine Ingersoll-Rand parts, fluids, oil and filters.
Maintenance is performed at prescribed intervals.
It is the obligation of the user to provide verification that these conditions have been satisfied
when submitting warranty claims.
Ingersoll-Rand will provide a new part or repaired part, at its election, in place of any part,
which is found upon its inspection to be defective in material and workmanship during the

Warranty Operating & Maintenance Manual
17
period prescribed above. Such part will be repaired or replaced without charge to the initial
user during normal working hours at the place of business of an Ingersoll-Rand distributor
authorized to sell the type of equipment involved or other establishment authorized by
Ingersoll-Rand. User must present proof of purchase at the time of exercising warranty.
Theabovewarrantydoesnot applytofailuresoccurringas aresultof abuse;misuse,negligent
repairs, corrosion, erosion and normal wear and tear, alterations or modifications made to the
product without express written consent of Ingersoll-Rand; or failure to follow the
recommended operating practices and maintenance procedures as provided in the product’s
operating and maintenance publications.
AccessoriesorequipmentfurnishedbyIngersoll-Rand,but manufacturedbyothers,including,
but not limited to, engines, shall carrywhatever warranty the manufacturershave conveyed to
Ingersoll-Rand and which can be passed on to the initial user.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED,
(EXCEPT THAT OF TITLE),AND THERE ARE NO WARRANTIES OF MERCHANTABILITY
OR OF FITNESS FOR A PARTICULAR PURPOSE.

Operating & Maintenance Manual Warranty
18
General Warranty Information
NOTE: Actual warranty times may change. Consult the manufacturer’s
warranty policy as shipped with each new product.
GENERAL WARRANTY Extended Coverage
Portable Compressor Package 1 year/2000 hours
Airend 2 years/4000 hours 5 years/10,000 hours Limited warranty, major
components (refer to operator’s manual).
Portable Genset 8KW, 11KW,
20KVA thru 575KVA Package 1 year/2000 hours None
Generator 2 years/4000 hours None
Portable Genset 3.5KW thru 7.0KW
and 10KW Package 1 year/2000 hours PARTS ONLY None
Generator 1 year/2000 hours PARTS
ONLY None
Light Tower Package 1 year/2000 hours
Generator 1 years/4000 hours 2 years/4000 hours, for Lightsource
introduced 8/16/99.
ENGINES
Caterpillar Months Hours Extended Coverage
12 No Limit Available at dealer
Cummins 24 2000 Major components 3 yrs/10,000 hours - available at dealer
John Deere (IN COMPRESSORS)
(IN GENERATORS AS OF 1/1/01)
24
24
2000
2000
5 yrs/5000 hours using OEM fluids & filters with $250 deductible.
2 yrs/4000 hours using IR fluids & filters
Deutz 24 2000 Available at dealer
Ingersoll-Rand 24 4000 5 years/10,000 hours when using genuine Ingersoll-Rand fluids
and parts. Refer to operator’s manual.
Kubota (North America Only)
(Western Europe & Oceania)
(Central & South America, Asia,
Middle East & Africa)
24
24
12
2000
2000
1000
Major components 36 months/3000 hrs - parts only
None
None
Mitsubishi 24 2000 2 years/4000 hours using IR fluids and filters
Volvo 24 2000 2 years/4000 hours using IR fluids and filters
Honda 12 unlimited None
Vanguard 24 unlimited None
PARTS
Ingersoll-Rand Months Hours Coverage
6 No Limit Parts Only
AIREND EXCHANGE
Airend Months Hours Extended Coverage
12 2000 hours 2 years/4000 hours - available from IR.