InHand ISE-P User manual

ISE - P Industrial Ethernet Switch
Quick Guide
www.Inhandnetworks.com
2022 Aug

Contents
1. PRODUCT INFORMATION .........................................................................3
1.1 STANDARD ACCESSORIES.......................................................................3
1.2 FEATURES.............................................................................................4
2. INSTALLATION............................................................................................5
2.1 DIN RAIL MOUNTING...............................................................................5
2.1.1 Mount the ISE onto a DIN-rail ....................................................5
2.1.2 Uninstall the ISE from a DIN Rail...............................................5
2.2 POWER CONNECTION DIAGRAM ...........................................................6
2.3 DIPSWITCH SETTING .........................................................................7
2.4 PORT CONNECTION DIAGRAM......................................................................7
2.5 THE LED ARRAY..............................................................................................8

1. Product Information
This document instructs users on how to rapidly deploy the ISE Switch in the
field.
Before beginning, check that you have:
•Small flat-head screwdriver
•Normal Philips-head screwdriver
Carefully check the contents of the package and look for any missing or
damaged parts. If there are any problems, please contact InHand sales staff.
InHand also offers optional accessories to customers depending on the site
characteristics and customer requirements please see the list of optional
accessories below:
1.1 Standard Accessories
Accessories
Quantity
Description
ISE –P Switch
1
Industrial Ethernet Switch
DIN-Rail
1
Install in Switch
2-pin power terminal
1
A Black elbow shaped power plug

1.2 Features
⚫Input Voltage:
12/24/48VDC & 24VAC Class 2
⚫Power Consumption:
<5W
⚫Size:
24mm (W) x 100mm (H) x 61.8mm (D)
(3 or 5 Ports Model)
40mm (W) x 100mm (H) x 61.8mm (D)
(8 Ports Model)
⚫Weight:
<0.16KG (3 or 5 Ports Model)
<0.23KG (8 Ports Model)
⚫Operating Temperature:
-40℃~75℃
⚫Humidity:
5%~95%, No Condensation

2. Installation
2.1 DIN rail mounting
2.1.1 Mount the Switch onto a DIN-rail
•Fixed to the back of the Switch is a DIN rail mounting bracket. To
mount the Switch follow these steps:
•Hook the top seat of the mounting bracket onto the DIN rail.
•Push the bottom of the Switch towards the DIN rail, causing the bottom
lip to snap onto the bottom of the rail. This may require some force.
2.1.2 Uninstall the ISE from a DIN Rail
Removing the ISE is opposite of mounting it.
1. Pull the bottom part of the Switch out until the bottom lip of the bracket
unclips from the rail. This may take some force.
2. Lift the Switch so that the rail seat clears the top part of the DIN rail.
Now, you are finished.

2.2 Power Connection Diagram
AC/DC input cable connection diagram for 3 or 5 Ports Model
AC/DC input cable connection diagram for 8 Ports Model
Before connecting the device to the AC/DC power inputs, make sure the
AC/DC power source voltage is stable.
L/+ end is connected to the positive AC/DC wire.
N/- end is connected to the negative AC/DC wire.
In order to improve radiation protection and ESD resistance, equipment
must be grounded. The grounding method will vary from site to site.

2.3 DIP Switch Setting
The switch allows users to enable or disable the Quality of Service (QoS) function, and broadcast storm protection (BSP)
with DIP switch on the outer panel.
Settings for the Fast Ethernet switches:
DIP Switch
Setting
Description
Quality of
Service(QoS)
ON
Enable the quality of Service to handle packet priorities in two WRR queues.
QoS and priority mapping matrix in each queue.
Qos 3bit priority
7.6.5.4
3.2.1.0
Queues
1
0
WRR
16
1
OFF
Disables the Quality of Service
Broadcast
Storm
Protection
ON
Enables broadcast storm protection (only allow maximum of 200 broadcast
packets per second) for each Ethernet port.
OFF
Disable the broadcast storm protection.
Settings for the Gigabit Ethernet switches:
DIP Switch
Setting
Description
Quality of
Service(QoS)
ON
Enable the quality of Service to handle packet priorities in four WRR queues.
QoS and ToS/DSCP priority mapping matrix in each queue.
CoS Priority
7,6
5,4
3,2
1,0
ToS/DSCP Priority
63 to 48
47 to 32
31 to 16
15 to 0
Queues
3
2
1
0
WRR
8
4
2
1
OFF
Disables the Quality of Service
Broadcast
Storm
Protection
ON
Enables broadcast storm protection (at a maximum of 2000 broadcast
packets per second) for each Ethernet port.
OFF
Disable the broadcast storm protection.
2.4 Port Connection Diagram

2.5 The LED Array
LED
State
Description
Power(PWR)
Green
On
Power is being supplied to power input.
Off
Power is not being supplied to power input.
Ports
(Full 1000M)
Green
On
When the port is active and links on 1000 Mbps.
Blinking
When the port’s data is being transmitted at 1000 Mbps.
Off
When the port is inactive or link down.
Amber
On
When the port is active and links on 100 Mbps.
Blinking
When the port’s data is being transmitted at 100 Mbps.
Off
When the port is inactive or link down.
Ports
(Full 100M)
Green
On
When the port is active and links on 100 Mbps.
Blinking
When the port’s data is being transmitted at 100 Mbps.
Off
When the port is inactive or link down.