Ink Bird ITC-1000 User manual
ALL PURPOSE
Inkbird is a home automation brand operating
around the globe. We specialize in thermostat
and lighting control system products.
INKBIRD ITC-1000
TEMP. CONTROLLER
Contact Us
INKBIRD Tech. C. L.
HOW TO SET
PANEL INSTRUCTION
6of 15
Up Key: Choose Parameter, Increase Value and
Check the Setting Temperature Value
Down Key: Choose Parameter, Decrease Value and
Check the Setting Difference Value
Set Key: Entry, Exit and Set Parameters
Power Key: Power On and Off, Confirm the
Setting Value, Save and Exit Function
C/F Display: Degrees Celsius or degrees Fahrenheit
PV/SV Display: Display Process Value,
Set Value and Parameter Menu
Set Indicator Lamp: On: Parameter Setting
Status
Heat Indicator Lamp: On: Heating Start
Off: Heating Stop
Cool Indicator Lamp: On: Refrigerating Start
Off: Refrigerating Stop
Flash: Compressor Delay
(Left lamp)
(Right lamp)
Contact Us
Email: cs@ink-bird.com , www.ink-bird.com
INKBIRD Tech. C. L.
HOW TO SET
KEY OPERATING
Check Parameter
In normal working status, press “ ”
key once, it will display the setting
temperature value; press “ ” key
once, it will display the difference
value
7of 15
Parameter Setting
•In normal working status, keep pressing “ ” for more than 3s to enter set mode, set
indicator lamp is on, screen displays the first menu code “TS”.
•Press “ ” key or “ ” key to move up or down the menu item and display the menu
code.
•Press “ ” key to enter the parameter setting of current menu, the parameter value
starts to flash.
•Press “ ” key or “ ” key to adjust the parameter value of current menu.
•After the set, press “ ” key to exit the parameter setting of current menu,
the parameter value stops to flash. User can set the other functions as above steps.
•In any status, press “ ” key to save the parameter modified value, and return to the
normal temperature value.
•If no operating within 10s, it will exit the menu automatically and return to
normal temperature display status, and does not save the parameter of this modification.
Contact Us
INKBIRD Tech. C. L.
HOW TO SET
OPERATING INSTRUCTION
•In normal working status, press and hold “ ” key for more than 3s to turn off the controller; in Power-off Status, press and hold
“ ” key for more than 1s to turn on the controller.
•In normal working status, screen displays the current measuring value, the controller switch modes between heating and cooling
automatically.
•If the measuring temperature ≥temperature set value + difference set value, the controller starts refrigerating, the cool indicator
lamp lights on, and the refrigerating relay is connected. When cool indicator lamp flashes, indicating that the refrigerating device is
under compressor delay protecting status.
•If the measuring temperature ≤temperature set value, the cool indicator lamp turns off, and the refrigerating relay is disconnected.
•If the measuring temperature ≤temperature set value - difference set value, the controller starts heating, the heat indicator lamp
lights on, and the heating relay is connected.
•If the measuring temperature ≥temperature set value, the heat indicator lamp turns off, and the heating relay is disconnected.
8of 15 Contact Us
INKBIRD Tech. C. L.
HOW TO SET
MENU INSTRUCTION
9of 15
Code Function Set range Default Note
TS Temperature
Set Value -50～99.9 oC 10.0 oC
DS Difference Set
Value 0.3～15 oC 1.0 oC
PT Compressor
Delay
0～10
minutes 3munites
CA
Temperature
Calibration
Value
-15 oC～15 oC 0 oC
CF Fahrenheit or
Celsius Setting C
Code Function Set range Default Note
TS Temperature
Set Value -50～210 oF50 oF Min. Unit 1 oF
DS Difference Set
Value 1～30 oF 3 oF
PT Compressor
Delay
0～10
minutes 3 minutes
CA
Temperature
Calibration
Value
-15～15 oF 0 oF
CF Fahrenheit or
Celsius Setting F
When the set temperature is degrees Celsius When the set temperature is degrees Fahrenheit
Contact Us
INKBIRD Tech. C. L.
HOW TO SET
SAMPLE
Fahrenheit or Celsius Setting: F
keep pressing “ ” for more than
3s to enter set mode
Press “ ” key once , and the
screen shows “CF” code
ENTER CF MODE
Press “ ” Key to enter CF setting, use “ ”
key or “ ” key, choose “F”.
Press “ ” key to confirm and continue to
setting.
CHOOSE F
11 of 15 Contact Us
INKBIRD Tech. C. L.
HOW TO SET
Example: Target Temperature: 75 –85 ℉
To get 75-85 F target temperature, you need to set:
TS(temperature set value)= 80
DS(difference set value) = 5
Press “ ” key and choose “TS”
code
ENTER TS MODE
Press “ ” Key to enter TS setting, use “ ” key
or “ ” key, choose “80”.
Press “ ” key to confirm and continue to setting.
CHOOSE 80
12 of 15 Contact Us
INKBIRD Tech. C. L.
SAMPLE
Press “ ” key and choose “DS”
code
ENTER DS MODE
Press “ ” Key to enter DS setting, use “ ” key
or “ ” key, choose “5”.
Press “ ” key to confirm and continue to setting.
CHOOSE 5
HOW TO SET
SAMPLE
CA(Temperature Calibration Value)=2
Press “ ” key and choose “CA”
code
ENTER CA MODE
Press “ ” Key once to enter CA setting, use
“ ” key or “ ” key, choose “2”.
Press “ ” key to confirm and continue to
setting.
CHOOSE 2
14 of 15 Contact Us
INKBIRD Tech. C. L.
IMPORTENCE: after setting, don’t forget to press “ ” key to save the parameter modified
value, and return to the normal temperature value.
GET IN TOUCH
CONTACT US
ABOUT US
INKBIRD is a home automation brand operating
around the globe. We specialize in thermostat and
lighting control system products.
We pride ourselves on understanding what consumers
need and how to fulfill their demand. Since
2010, INKBIRD has enjoyed years of
continuous growth thanks to millions of satisfied
customers around the world.
At INKBIRD, We look into the latest innovations and
find products that can connect with our daily life;
ideas that can make our routine tasks easier;
technologies that truly enhance our activities.
15 of 15
Email: cs@ink-bird.com
Website: www.ink-bird.com
INKBIRD Tech. C. L.
Contact Us
INKBIRD Tech. C. L.
Other manuals for ITC-1000
1
Table of contents
Other Ink Bird Temperature Controllers manuals
Ink Bird
Ink Bird ITC-308 User manual
Ink Bird
Ink Bird ITC-608T User manual
Ink Bird
Ink Bird ITC-308 User manual
Ink Bird
Ink Bird IHC-230 User manual
Ink Bird
Ink Bird ITC-308 User manual
Ink Bird
Ink Bird ITC-106 User manual
Ink Bird
Ink Bird ITC-306A User manual
Ink Bird
Ink Bird ITC-306T User manual
Ink Bird
Ink Bird ITC-1000 User manual
Ink Bird
Ink Bird ITC-1000F User manual
Popular Temperature Controllers manuals by other brands
Stork
Stork ST 501 Series manual
RKC INSTRUMENT
RKC INSTRUMENT Z-TIO Host Communication Quick instruction manual
Vexve
Vexve AM CTS Mounting and operation instructions
Honeywell
Honeywell HCW 82 Installation and operation
E+E Elektronik
E+E Elektronik HCT01 Developer's guide
Brink
Brink Flair 325 Installation regulations
